[PATCH 8/8 v4] ARM OMAP2+ GPMC: fix programming/showing reserved timing parameters

From: Robert ABEL
Date: Fri Feb 27 2015 - 10:58:04 EST

GPMC_CONFIG1_i parameters CLKACTIVATIONTIME and WAITMONITORINGTIME
have reserved values.
Raise an error if calculated timings try to program reserved values.

GPMC_CONFIG1_i ATTACHEDDEVICEPAGELENGTH and DEVICESIZE were already checked
when parsing the DT.

Explicitly comment invalid values on gpmc_cs_show_timings for
-CLKACTIVATIONTIME
-WAITMONITORINGTIME
-DEVICESIZE
-ATTACHEDDEVICEPAGELENGTH

Signed-off-by: Robert ABEL <rabel@xxxxxxxxxxxxxxxxxxxxxxx>
---
drivers/memory/omap-gpmc.c | 68 ++++++++++++++++++++++++++++++----------------
1 file changed, 45 insertions(+), 23 deletions(-)

diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index d091065..750c655 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -135,7 +135,11 @@
#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27)
#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27)
#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
+/** CLKACTIVATIONTIME Max Ticks */
+#define GPMC_CONFIG1_CLKACTIVATIONTIME_MAX 2
#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23)
+/** ATTACHEDDEVICEPAGELENGTH Max Value */
+#define GPMC_CONFIG1_ATTACHEDDEVICEPAGELENGTH_MAX 2
#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22)
#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21)
#define GPMC_CONFIG1_WAIT_MON_TIME(val) ((val & 3) << 18)
@@ -144,6 +148,8 @@
#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16)
#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12)
#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
+/** DEVICESIZE Max Value */
+#define GPMC_CONFIG1_DEVICESIZE_MAX 1
#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10)
#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8)
@@ -393,6 +399,8 @@ static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p)
* @reg: GPMC_CS_CONFIGn register offset.
* @st_bit: Start Bit
* @end_bit: End Bit. Must be >= @st_bit.
+ * @ma:x Maximum parameter value (before optional @shift).
+ * If 0, maximum is as high as @st_bit and @end_bit allow.
* @name: DTS node name, w/o "gpmc,"
* @cd: Clock Domain of timing parameter.
* @shift: Parameter value left shifts @shift, which is then printed instead of value.
@@ -400,13 +408,14 @@ static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p)
* raw format: gpmc,name = <value>
* tick format: gpmc,name = <value> /&zwj;* x ns -- y ns; x ticks *&zwj;/
* Where x ns -- y ns result in the same tick value.
+ * When @max is exceeded, "invalid" is printed inside comment.
* @noval: Parameter values equal to 0 are not printed.
* @return: Specified timing parameter (after optional @shift).
*
*/
static int get_gpmc_timing_reg(
/* timing specifiers */
- int cs, int reg, int st_bit, int end_bit,
+ int cs, int reg, int st_bit, int end_bit, int max,
const char *name, const enum gpmc_clk_domain cd,
/* value transform */
int shift,
@@ -416,11 +425,15 @@ static int get_gpmc_timing_reg(
u32 l;
int nr_bits;
int mask;
+ bool invalid;

l = gpmc_cs_read_reg(cs, reg);
nr_bits = end_bit - st_bit + 1;
mask = (1 << nr_bits) - 1;
l = (l >> st_bit) & mask;
+ if (!max)
+ max = mask;
+ invalid = l > max;
if (shift)
l = (shift << l);
if (noval && (l == 0))
@@ -433,11 +446,11 @@ static int get_gpmc_timing_reg(
if (l)
time_ns_min = gpmc_clk_ticks_to_ns(l - 1, cs, cd) + 1;
time_ns = gpmc_clk_ticks_to_ns(l, cs, cd);
- pr_info("gpmc,%s = <%u> /* %u ns - %u ns; %i ticks */\n",
- name, time_ns, time_ns_min, time_ns, l);
+ pr_info("gpmc,%s = <%u> /* %u ns - %u ns; %i ticks%s*/\n",
+ name, time_ns, time_ns_min, time_ns, l, invalid ? "; invalid " : " ");
} else {
/* raw format */
- pr_info("gpmc,%s = <%u>\n", name, l);
+ pr_info("gpmc,%s = <%u>%s\n", name, l, invalid ? " /* invalid */" : "");
}

return l;
@@ -447,15 +460,19 @@ static int get_gpmc_timing_reg(
pr_info("cs%i %s: 0x%08x\n", cs, #config, \
gpmc_cs_read_reg(cs, config))
#define GPMC_GET_RAW(reg, st, end, field) \
- get_gpmc_timing_reg(cs, (reg), (st), (end), field, GPMC_CD_FCLK, 0, 1, 0)
+ get_gpmc_timing_reg(cs, (reg), (st), (end), 0, field, GPMC_CD_FCLK, 0, 1, 0)
+#define GPMC_GET_RAW_MAX(reg, st, end, max, field) \
+ get_gpmc_timing_reg(cs, (reg), (st), (end), (max), field, GPMC_CD_FCLK, 0, 1, 0)
#define GPMC_GET_RAW_BOOL(reg, st, end, field) \
- get_gpmc_timing_reg(cs, (reg), (st), (end), field, GPMC_CD_FCLK, 0, 1, 1)
-#define GPMC_GET_RAW_SHIFT(reg, st, end, shift, field) \
- get_gpmc_timing_reg(cs, (reg), (st), (end), field, GPMC_CD_FCLK, (shift), 1, 1)
+ get_gpmc_timing_reg(cs, (reg), (st), (end), 0, field, GPMC_CD_FCLK, 0, 1, 1)
+#define GPMC_GET_RAW_SHIFT_MAX(reg, st, end, shift, max, field) \
+ get_gpmc_timing_reg(cs, (reg), (st), (end), (max), field, GPMC_CD_FCLK, (shift), 1, 1)
#define GPMC_GET_TICKS(reg, st, end, field) \
- get_gpmc_timing_reg(cs, (reg), (st), (end), field, GPMC_CD_FCLK, 0, 0, 0)
+ get_gpmc_timing_reg(cs, (reg), (st), (end), 0, field, GPMC_CD_FCLK, 0, 0, 0)
#define GPMC_GET_TICKS_CD(reg, st, end, field, cd) \
- get_gpmc_timing_reg(cs, (reg), (st), (end), field, (cd), 0, 0, 0)
+ get_gpmc_timing_reg(cs, (reg), (st), (end), 0, field, (cd), 0, 0, 0)
+#define GPMC_GET_TICKS_CD_MAX(reg, st, end, max, field, cd) \
+ get_gpmc_timing_reg(cs, (reg), (st), (end), (max), field, (cd), 0, 0, 0)

static void gpmc_show_regs(int cs, const char *desc)
{
@@ -479,11 +496,11 @@ static void gpmc_cs_show_timings(int cs, const char *desc)
pr_info("gpmc cs%i access configuration:\n", cs);
GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 4, 4, "time-para-granularity");
GPMC_GET_RAW(GPMC_CS_CONFIG1, 8, 9, "mux-add-data");
- GPMC_GET_RAW(GPMC_CS_CONFIG1, 12, 13, "device-width");
+ GPMC_GET_RAW_MAX(GPMC_CS_CONFIG1, 12, 13, GPMC_CONFIG1_DEVICESIZE_MAX, "device-width");
GPMC_GET_RAW(GPMC_CS_CONFIG1, 16, 17, "wait-pin");
GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 21, 21, "wait-on-write");
GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 22, 22, "wait-on-read");
- GPMC_GET_RAW_SHIFT(GPMC_CS_CONFIG1, 23, 24, 4, "burst-length");
+ GPMC_GET_RAW_SHIFT_MAX(GPMC_CS_CONFIG1, 23, 24, 4, GPMC_CONFIG1_ATTACHEDDEVICEPAGELENGTH_MAX, "burst-length");
GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 27, 27, "sync-write");
GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 28, 28, "burst-write");
GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 29, 29, "gpmc,sync-read");
@@ -523,8 +540,8 @@ static void gpmc_cs_show_timings(int cs, const char *desc)
GPMC_GET_TICKS(GPMC_CS_CONFIG6, 0, 3, "bus-turnaround-ns");
GPMC_GET_TICKS(GPMC_CS_CONFIG6, 8, 11, "cycle2cycle-delay-ns");

- GPMC_GET_TICKS_CD(GPMC_CS_CONFIG1, 18, 19, "wait-monitoring-ns", GPMC_CD_CLK);
- GPMC_GET_TICKS(GPMC_CS_CONFIG1, 25, 26, "clk-activation-ns");
+ GPMC_GET_TICKS_CD_MAX(GPMC_CS_CONFIG1, 18, 19, GPMC_CONFIG1_WAITMONITORINGTIME_MAX, "wait-monitoring-ns", GPMC_CD_CLK);
+ GPMC_GET_TICKS_CD_MAX(GPMC_CS_CONFIG1, 25, 26, GPMC_CONFIG1_CLKACTIVATIONTIME_MAX, "clk-activation-ns", GPMC_CD_FCLK);

GPMC_GET_TICKS(GPMC_CS_CONFIG6, 16, 19, "wr-data-mux-bus-ns");
GPMC_GET_TICKS(GPMC_CS_CONFIG6, 24, 28, "wr-access-ns");
@@ -544,12 +561,14 @@ static inline void gpmc_cs_show_timings(int cs, const char *desc)
* @reg: GPMC_CS_CONFIGn register offset.
* @st_bit: Start Bit
* @end_bit: End Bit. Must be >= @st_bit.
+ * @max: Maximum parameter value.
+ * If 0, maximum is as high as @st_bit and @end_bit allow.
* @time: Timing parameter in ns.
* @cd: Timing parameter clock domain.
* @name: Timing parameter name.
* @return: 0 on success, -1 on error.
*/
-static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
+static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, int max,
int time, enum gpmc_clk_domain cd, const char *name)
{
u32 l;
@@ -562,9 +581,12 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
nr_bits = end_bit - st_bit + 1;
mask = (1 << nr_bits) - 1;

- if (ticks > mask) {
+ if (!max)
+ max = mask;
+
+ if (ticks > max) {
pr_err("%s: GPMC CS%d: %s %d ns, %d ticks > %d ticks\n",
- __func__, cs, name, time, ticks, mask);
+ __func__, cs, name, time, ticks, max);

return -1;
}
@@ -583,13 +605,13 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
return 0;
}

-#define GPMC_SET_ONE_CD(reg, st, end, field, cd) \
- if (set_gpmc_timing_reg(cs, (reg), (st), (end), \
- t->field, (cd), #field) < 0) \
+#define GPMC_SET_ONE_CD_MAX(reg, st, end, max, field, cd) \
+ if (set_gpmc_timing_reg(cs, (reg), (st), (end), (max), \
+ t->field, (cd), #field) < 0) \
return -1

#define GPMC_SET_ONE(reg, st, end, field) \
- GPMC_SET_ONE_CD(reg, st, end, field, GPMC_CD_FCLK)
+ GPMC_SET_ONE_CD_MAX(reg, st, end, 0, field, GPMC_CD_FCLK)

/**
* gpmc_calc_waitmonitoring_divider - calculate proper GPMCFCLKDIVIDER based on WAITMONITORINGTIME
@@ -717,8 +739,8 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t, const struct gpmc_
l |= (div - 1);
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l);

- GPMC_SET_ONE_CD(GPMC_CS_CONFIG1, 18, 19, wait_monitoring, GPMC_CD_CLK);
- GPMC_SET_ONE(GPMC_CS_CONFIG1, 25, 26, clk_activation);
+ GPMC_SET_ONE_CD_MAX(GPMC_CS_CONFIG1, 18, 19, GPMC_CONFIG1_WAITMONITORINGTIME_MAX, wait_monitoring, GPMC_CD_CLK);
+ GPMC_SET_ONE_CD_MAX(GPMC_CS_CONFIG1, 25, 26, GPMC_CONFIG1_CLKACTIVATIONTIME_MAX, clk_activation, GPMC_CD_FCLK);

#ifdef DEBUG
pr_info("GPMC CS%d CLK period is %lu ns (div %d)\n",
--
2.3.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/