Re: [PATCH v2 2/7] phy: miphy365x: Pass sysconfig register offsets via syscfg dt property.
From: Kishon Vijay Abraham I
Date: Fri Jan 30 2015 - 05:36:33 EST
Hi,
On Wednesday 07 January 2015 08:34 PM, Peter Griffin wrote:
> Based on Arnds review comments here https://lkml.org/lkml/2014/11/13/161,
> update the miphy365 phy driver to access sysconfig register offsets via
> syscfg dt property.
>
> This is because the reg property should not be mixing address spaces
> like it does currently for miphy365. This change then also aligns us
> to how other platforms such as keystone and bcm7445 pass there syscon
> offsets via DT.
>
> This patch breaks DT compatibility, but this platform is considered WIP,
> and is only used by a few developers who are upstreaming support for it.
> This change has been done as a single atomic commit to ensure it is
> bisectable.
I'm dropping this from my tree since I didn't get Ack from
"arch/arm/boot/dts/stih416.dtsi" Maintainer.
Thanks
Kishon
>
> Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
> Reviewed-by: Arnd Bergmann <arnd@xxxxxxxx>
> ---
> .../devicetree/bindings/phy/phy-miphy365x.txt | 15 +++++------
> arch/arm/boot/dts/stih416.dtsi | 10 ++++----
> drivers/phy/phy-miphy365x.c | 29 ++++++++--------------
> 3 files changed, 23 insertions(+), 31 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> index 42c8808..9802d5d 100644
> --- a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> +++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> @@ -6,8 +6,10 @@ for SATA and PCIe.
>
> Required properties (controller (parent) node):
> - compatible : Should be "st,miphy365x-phy"
> -- st,syscfg : Should be a phandle of the system configuration register group
> - which contain the SATA, PCIe mode setting bits
> +- st,syscfg : Phandle / integer array property. Phandle of sysconfig group
> + containing the miphy registers and integer array should contain
> + an entry for each port sub-node, specifying the control
> + register offset inside the sysconfig group.
>
> Required nodes : A sub-node is required for each channel the controller
> provides. Address range information including the usual
> @@ -26,7 +28,6 @@ Required properties (port (child) node):
> registers filled in "reg":
> - sata: For SATA devices
> - pcie: For PCIe devices
> - - syscfg: To specify the syscfg based config register
>
> Optional properties (port (child) node):
> - st,sata-gen : Generation of locally attached SATA IP. Expected values
> @@ -39,20 +40,20 @@ Example:
>
> miphy365x_phy: miphy365x@fe382000 {
> compatible = "st,miphy365x-phy";
> - st,syscfg = <&syscfg_rear>;
> + st,syscfg = <&syscfg_rear 0x824 0x828>;
> #address-cells = <1>;
> #size-cells = <1>;
> ranges;
>
> phy_port0: port@fe382000 {
> - reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
> - reg-names = "sata", "pcie", "syscfg";
> + reg = <0xfe382000 0x100>, <0xfe394000 0x100>;
> + reg-names = "sata", "pcie";
> #phy-cells = <1>;
> st,sata-gen = <3>;
> };
>
> phy_port1: port@fe38a000 {
> - reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;;
> + reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;;
> reg-names = "sata", "pcie", "syscfg";
> #phy-cells = <1>;
> st,pcie-tx-pol-inv;
> diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
> index fad9073..85afe01 100644
> --- a/arch/arm/boot/dts/stih416.dtsi
> +++ b/arch/arm/boot/dts/stih416.dtsi
> @@ -283,21 +283,21 @@
>
> miphy365x_phy: phy@fe382000 {
> compatible = "st,miphy365x-phy";
> - st,syscfg = <&syscfg_rear>;
> + st,syscfg = <&syscfg_rear 0x824 0x828>;
> #address-cells = <1>;
> #size-cells = <1>;
> ranges;
>
> phy_port0: port@fe382000 {
> #phy-cells = <1>;
> - reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
> - reg-names = "sata", "pcie", "syscfg";
> + reg = <0xfe382000 0x100>, <0xfe394000 0x100>;
> + reg-names = "sata", "pcie";
> };
>
> phy_port1: port@fe38a000 {
> #phy-cells = <1>;
> - reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;
> - reg-names = "sata", "pcie", "syscfg";
> + reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;
> + reg-names = "sata", "pcie";
> };
> };
>
> diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c
> index 6ab43a8..6c80154 100644
> --- a/drivers/phy/phy-miphy365x.c
> +++ b/drivers/phy/phy-miphy365x.c
> @@ -141,7 +141,7 @@ struct miphy365x_phy {
> bool pcie_tx_pol_inv;
> bool sata_tx_pol_inv;
> u32 sata_gen;
> - u64 ctrlreg;
> + u32 ctrlreg;
> u8 type;
> };
>
> @@ -179,7 +179,7 @@ static int miphy365x_set_path(struct miphy365x_phy *miphy_phy,
> bool sata = (miphy_phy->type == MIPHY_TYPE_SATA);
>
> return regmap_update_bits(miphy_dev->regmap,
> - (unsigned int)miphy_phy->ctrlreg,
> + miphy_phy->ctrlreg,
> SYSCFG_SELECT_SATA_MASK,
> sata << SYSCFG_SELECT_SATA_POS);
> }
> @@ -445,7 +445,6 @@ int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy,
> {
> struct device_node *phynode = miphy_phy->phy->dev.of_node;
> const char *name;
> - const __be32 *taddr;
> int type = miphy_phy->type;
> int ret;
>
> @@ -455,22 +454,6 @@ int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy,
> return ret;
> }
>
> - if (!strncmp(name, "syscfg", 6)) {
> - taddr = of_get_address(phynode, index, NULL, NULL);
> - if (!taddr) {
> - dev_err(dev, "failed to fetch syscfg address\n");
> - return -EINVAL;
> - }
> -
> - miphy_phy->ctrlreg = of_translate_address(phynode, taddr);
> - if (miphy_phy->ctrlreg == OF_BAD_ADDR) {
> - dev_err(dev, "failed to translate syscfg address\n");
> - return -EINVAL;
> - }
> -
> - return 0;
> - }
> -
> if (!((!strncmp(name, "sata", 4) && type == MIPHY_TYPE_SATA) ||
> (!strncmp(name, "pcie", 4) && type == MIPHY_TYPE_PCIE)))
> return 0;
> @@ -606,7 +589,15 @@ static int miphy365x_probe(struct platform_device *pdev)
> return ret;
>
> phy_set_drvdata(phy, miphy_dev->phys[port]);
> +
> port++;
> + /* sysconfig offsets are indexed from 1 */
> + ret = of_property_read_u32_index(np, "st,syscfg", port,
> + &miphy_phy->ctrlreg);
> + if (ret) {
> + dev_err(&pdev->dev, "No sysconfig offset found\n");
> + return ret;
> + }
> }
>
> provider = devm_of_phy_provider_register(&pdev->dev, miphy365x_xlate);
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/