Re: [PATCH] spi/xilinx: Cast ioread32/iowrite32 function pointers

From: Geert Uytterhoeven
Date: Thu Jan 29 2015 - 10:57:06 EST


On Thu, Jan 29, 2015 at 3:51 PM, Ricardo Ribalda Delgado
<ricardo.ribalda@xxxxxxxxx> wrote:
> IO functions prototypes may have different argument qualifiers
> on different architectures.
>
> This patch cast the assignment of the function, to match the one defined
> at iomap.h.

Adding casts is (usually) not the solution to the problem.

I think the definitions in include/asm-generic/iomap.h are actually wrong,
as they lack a const:

extern unsigned int ioread8(void __iomem *);
extern unsigned int ioread16(void __iomem *);
extern unsigned int ioread16be(void __iomem *);
extern unsigned int ioread32(void __iomem *);
extern unsigned int ioread32be(void __iomem *);

Note that the definitions in include/asm-generic/io.h do have the const:

static inline u8 ioread8(const volatile void __iomem *addr)
static inline u16 ioread16(const volatile void __iomem *addr)
static inline u32 ioread32(const volatile void __iomem *addr)
static inline u16 ioread16be(const volatile void __iomem *addr)
static inline u32 ioread32be(const volatile void __iomem *addr)

> Fixes: 99082eab63449f9d spi/xilinx: Remove iowrite/ioread wrappers
> Reported-by: kbuild test robot <fengguang.wu@xxxxxxxxx>
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
> ---
> drivers/spi/spi-xilinx.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
> index 0e8962c..418e730 100644
> --- a/drivers/spi/spi-xilinx.c
> +++ b/drivers/spi/spi-xilinx.c
> @@ -91,7 +91,7 @@ struct xilinx_spi {
> u8 bytes_per_word;
> int buffer_size; /* buffer size in words */
> u32 cs_inactive; /* Level of the CS pins when inactive*/
> - unsigned int (*read_fn)(void __iomem *);
> + u32 (*read_fn)(void __iomem *);
> void (*write_fn)(u32, void __iomem *);
> };
>
> @@ -378,15 +378,15 @@ static int xilinx_spi_probe(struct platform_device *pdev)
> * Setup little endian helper functions first and try to use them
> * and check if bit was correctly setup or not.
> */
> - xspi->read_fn = ioread32;
> - xspi->write_fn = iowrite32;
> + xspi->read_fn = (u32 (*)(void __iomem *)) ioread32;
> + xspi->write_fn = (void (*)(u32, void __iomem *)) iowrite32;
>
> xspi->write_fn(XSPI_CR_LOOP, xspi->regs + XSPI_CR_OFFSET);
> tmp = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET);
> tmp &= XSPI_CR_LOOP;
> if (tmp != XSPI_CR_LOOP) {
> - xspi->read_fn = ioread32be;
> - xspi->write_fn = iowrite32be;
> + xspi->read_fn = (u32 (*)(void __iomem *)) ioread32be;
> + xspi->write_fn = (void (*)(u32, void __iomem *)) iowrite32be;
> }
>
> master->bits_per_word_mask = SPI_BPW_MASK(bits_per_word);
> --
> 2.1.4

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/