[PATCH v2 10/15] spi/xilinx: Convert remainding_bytes in remaining words

From: Ricardo Ribalda Delgado
Date: Wed Jan 28 2015 - 20:55:16 EST


Simplify the code by using the unit used on most of the code logic.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
---
drivers/spi/spi-xilinx.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 6ce1066..8ed306e 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -86,7 +86,7 @@ struct xilinx_spi {

u8 *rx_ptr; /* pointer in the Tx buffer */
const u8 *tx_ptr; /* pointer in the Rx buffer */
- int remaining_bytes; /* the number of bytes left to transfer */
+ int remaining_words; /* the number of words left to transfer */
u8 bits_per_word;
int buffer_size; /* buffer size in words */
u32 cs_inactive; /* Level of the CS pins when inactive*/
@@ -231,7 +231,7 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,

static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi, int n_words)
{
- xspi->remaining_bytes -= n_words * xspi->bits_per_word / 8;
+ xspi->remaining_words -= n_words;

while (n_words--)
xilinx_spi_tx(xspi);
@@ -246,15 +246,14 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)

xspi->tx_ptr = t->tx_buf;
xspi->rx_ptr = t->rx_buf;
- xspi->remaining_bytes = t->len;
+ xspi->remaining_words = (t->len * 8) / xspi->bits_per_word;
reinit_completion(&xspi->done);

- while (xspi->remaining_bytes) {
+ while (xspi->remaining_words) {
u16 cr = 0;
int n_words;

- n_words = (xspi->remaining_bytes * 8) / xspi->bits_per_word;
- n_words = min(n_words, xspi->buffer_size);
+ n_words = min(xspi->remaining_words, xspi->buffer_size);

xilinx_spi_fill_tx_fifo(xspi, n_words);

@@ -286,7 +285,7 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
xilinx_spi_rx(xspi);
}

- return t->len - xspi->remaining_bytes;
+ return t->len;
}


--
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/