Re: [lm-sensors] [PATCH] hwmon: (ads7828) Make sample interval configurable

[Guenter Roeck]

On 01/27/2015 02:37 AM, Jean Delvare wrote:
> Hi Robert,
>
> Le Tuesday 27 January 2015 Ã 08:59 +0100, Robert Rosengren a Ãcrit :
> > On 01/16/2015 07:30 PM, Guenter Roeck wrote:
> > > I sent a couple of patches a minute ago which should take care of the issue.
> > > Would be great if you can test it.
> > I applied the v2 versions of the patches for a quick test, but it was
> > not successful. Haven't done any further investigation on what the
> > problem might be, but when trying to read the sysfs driver I get "read
> > error: No such device or address".
> >
> > The sysfs path have moved with the REGMAP settings, from
> > /sys/bus/i2c/devices/<x>/in0_input to
> > /sys/bus/i2c/devices/<x>/hwmon/hwmon0/in0_input.
>
> This is expected, shouldn't be an issue if you are using a
> libsensors-based application with a recent enough version of libsensors.

Odd though, thinking about it, since the move was done with a separate
patch, not with the regmap patch.

Guenter

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/