Re: [PATCH v2 3/4] mfd: dln2: add start/stop RX URBs helpers

From: Lee Jones
Date: Sun Jan 18 2015 - 12:49:45 EST


On Tue, 16 Dec 2014, Octavian Purdila wrote:

> This is in preparation for adding suspend / resume support.

Please re-submit this set with the Acks you have received.

Also draft a cover-letter with the current status of set, what you
need next etc.

> Signed-off-by: Octavian Purdila <octavian.purdila@xxxxxxxxx>
> ---
> drivers/mfd/dln2.c | 51 +++++++++++++++++++++++++++++++++++++++++----------
> 1 file changed, 41 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c
> index 6d49685..75358d2 100644
> --- a/drivers/mfd/dln2.c
> +++ b/drivers/mfd/dln2.c
> @@ -587,12 +587,19 @@ static void dln2_free_rx_urbs(struct dln2_dev *dln2)
> int i;
>
> for (i = 0; i < DLN2_MAX_URBS; i++) {
> - usb_kill_urb(dln2->rx_urb[i]);
> usb_free_urb(dln2->rx_urb[i]);
> kfree(dln2->rx_buf[i]);
> }
> }
>
> +static void dln2_stop_rx_urbs(struct dln2_dev *dln2)
> +{
> + int i;
> +
> + for (i = 0; i < DLN2_MAX_URBS; i++)
> + usb_kill_urb(dln2->rx_urb[i]);
> +}
> +
> static void dln2_free(struct dln2_dev *dln2)
> {
> dln2_free_rx_urbs(dln2);
> @@ -604,9 +611,7 @@ static int dln2_setup_rx_urbs(struct dln2_dev *dln2,
> struct usb_host_interface *hostif)
> {
> int i;
> - int ret;
> const int rx_max_size = DLN2_RX_BUF_SIZE;
> - struct device *dev = &dln2->interface->dev;
>
> for (i = 0; i < DLN2_MAX_URBS; i++) {
> dln2->rx_buf[i] = kmalloc(rx_max_size, GFP_KERNEL);
> @@ -621,7 +626,19 @@ static int dln2_setup_rx_urbs(struct dln2_dev *dln2,
> usb_rcvbulkpipe(dln2->usb_dev, dln2->ep_in),
> dln2->rx_buf[i], rx_max_size, dln2_rx, dln2);
>
> - ret = usb_submit_urb(dln2->rx_urb[i], GFP_KERNEL);
> + }
> +
> + return 0;
> +}
> +
> +static int dln2_start_rx_urbs(struct dln2_dev *dln2, gfp_t gfp)
> +{
> + struct device *dev = &dln2->interface->dev;
> + int ret;
> + int i;
> +
> + for (i = 0; i < DLN2_MAX_URBS; i++) {
> + ret = usb_submit_urb(dln2->rx_urb[i], gfp);
> if (ret < 0) {
> dev_err(dev, "failed to submit RX URB: %d\n", ret);
> return ret;
> @@ -665,9 +682,8 @@ static const struct mfd_cell dln2_devs[] = {
> },
> };
>
> -static void dln2_disconnect(struct usb_interface *interface)
> +static void dln2_stop(struct dln2_dev *dln2)
> {
> - struct dln2_dev *dln2 = usb_get_intfdata(interface);
> int i, j;
>
> /* don't allow starting new transfers */
> @@ -696,6 +712,14 @@ static void dln2_disconnect(struct usb_interface *interface)
> /* wait for transfers to end */
> wait_event(dln2->disconnect_wq, !dln2->active_transfers);
>
> + dln2_stop_rx_urbs(dln2);
> +}
> +static void dln2_disconnect(struct usb_interface *interface)
> +{
> + struct dln2_dev *dln2 = usb_get_intfdata(interface);
> +
> + dln2_stop(dln2);
> +
> mfd_remove_devices(&interface->dev);
>
> dln2_free(dln2);
> @@ -738,23 +762,30 @@ static int dln2_probe(struct usb_interface *interface,
>
> ret = dln2_setup_rx_urbs(dln2, hostif);
> if (ret)
> - goto out_cleanup;
> + goto out_free;
> +
> + ret = dln2_start_rx_urbs(dln2, GFP_KERNEL);
> + if (ret)
> + goto out_stop_rx;
>
> ret = dln2_hw_init(dln2);
> if (ret < 0) {
> dev_err(dev, "failed to initialize hardware\n");
> - goto out_cleanup;
> + goto out_stop_rx;
> }
>
> ret = mfd_add_hotplug_devices(dev, dln2_devs, ARRAY_SIZE(dln2_devs));
> if (ret != 0) {
> dev_err(dev, "failed to add mfd devices to core\n");
> - goto out_cleanup;
> + goto out_stop_rx;
> }
>
> return 0;
>
> -out_cleanup:
> +out_stop_rx:
> + dln2_stop_rx_urbs(dln2);
> +
> +out_free:
> dln2_free(dln2);
>
> return ret;

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/