Re: [PATCH RFC v6 16/21] drm: panel: Add support for Himax HX8369A MIPI DSI panel
From: Andrzej Hajda
Date: Mon Dec 29 2014 - 04:10:31 EST
On 12/29/2014 07:39 AM, Liu Ying wrote:
> This patch adds support for Himax HX8369A MIPI DSI panel.
>
> Signed-off-by: Liu Ying <Ying.Liu@xxxxxxxxxxxxx>
> ---
> v5->v6:
> * Make the checkpatch.pl script be happier.
> * Do not set the dsi channel number to be zero in probe(), because the MIPI DSI
> bus driver would set it.
>
> v4->v5:
> * Address Andrzej Hajda's comments.
> * Get the bs-gpios property instead of the bs[3:0]-gpios properties.
> * Implement error propagation for panel register configurations.
> * Other minor changes to improve the code quality.
>
> v3->v4:
> * Move the relevant dt-bindings to a separate patch to address Stefan
> Wahren's comment.
>
> v2->v3:
> * Sort the included header files alphabetically.
>
> v1->v2:
> * Address almost all comments from Thierry Reding.
> * Remove several DT properties as they can be implied by the compatible string.
> * Add the HIMAX/himax prefixes to the driver's Kconfig name and driver name.
> * Move the driver's Makefile entry place to sort the entries alphabetically.
> * Reuse several standard DCS functions instead of inventing wheels.
> * Move the panel resetting and power logics to the driver probe/remove stages.
> This may simplify panel prepare/unprepare hooks. The power consumption should
> not change a lot at DPMS since the panel enters sleep mode at that time.
> * Add the module author.
> * Other minor changes, such as coding style issues.
>
> drivers/gpu/drm/panel/Kconfig | 5 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-himax-hx8369a.c | 614 ++++++++++++++++++++++++++++
> 3 files changed, 620 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-himax-hx8369a.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 024e98e..81b0bf0 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -16,6 +16,11 @@ config DRM_PANEL_SIMPLE
> that it can be automatically turned off when the panel goes into a
> low power state.
>
> +config DRM_PANEL_HIMAX_HX8369A
> + tristate "Himax HX8369A panel"
> + depends on OF
> + select DRM_MIPI_DSI
> +
> config DRM_PANEL_LD9040
> tristate "LD9040 RGB/SPI panel"
> depends on OF && SPI
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 4b2a043..d5dbe06 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -1,4 +1,5 @@
> obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
> +obj-$(CONFIG_DRM_PANEL_HIMAX_HX8369A) += panel-himax-hx8369a.o
> obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o
> obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o
> obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8369a.c b/drivers/gpu/drm/panel/panel-himax-hx8369a.c
> new file mode 100644
> index 0000000..eee36a7
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8369a.c
> @@ -0,0 +1,614 @@
> +/*
> + * Himax HX8369A panel driver.
> + *
> + * Copyright (C) 2011-2014 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This driver is based on Samsung s6e8aa0 panel driver.
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_panel.h>
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/of_device.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +#include <video/of_videomode.h>
> +#include <video/videomode.h>
> +
> +#define WRDISBV 0x51
> +#define WRCTRLD 0x53
> +#define WRCABC 0x55
> +#define SETPOWER 0xb1
> +#define SETDISP 0xb2
> +#define SETCYC 0xb4
> +#define SETVCOM 0xb6
> +#define SETEXTC 0xb9
> +#define SETMIPI 0xba
> +#define SETPANEL 0xcc
> +#define SETGIP 0xd5
> +#define SETGAMMA 0xe0
> +
> +#define HX8369A_MIN_BRIGHTNESS 0x00
> +#define HX8369A_MAX_BRIGHTNESS 0xff
> +
> +enum hx8369a_mpu_interface {
> + HX8369A_DBI_TYPE_A_8BIT,
> + HX8369A_DBI_TYPE_A_9BIT,
> + HX8369A_DBI_TYPE_A_16BIT,
> + HX8369A_DBI_TYPE_A_18BIT,
> + HX8369A_DBI_TYPE_B_8BIT,
> + HX8369A_DBI_TYPE_B_9BIT,
> + HX8369A_DBI_TYPE_B_16BIT,
> + HX8369A_DBI_TYPE_B_18BIT,
> + HX8369A_DSI_CMD_MODE,
> + HX8369A_DBI_TYPE_B_24BIT,
> + HX8369A_DSI_VIDEO_MODE,
> + HX8369A_MDDI,
> + HX8369A_DPI_DBI_TYPE_C_OPT1,
> + HX8369A_DPI_DBI_TYPE_C_OPT2,
> + HX8369A_DPI_DBI_TYPE_C_OPT3
> +};
> +
> +enum hx8369a_resolution {
> + HX8369A_RES_480_864,
> + HX8369A_RES_480_854,
> + HX8369A_RES_480_800,
> + HX8369A_RES_480_640,
> + HX8369A_RES_360_640,
> + HX8369A_RES_480_720,
> +};
> +
> +struct hx8369a_panel_desc {
> + const struct drm_display_mode *mode;
> +
> + /* ms */
> + unsigned int power_on_delay;
> + unsigned int reset_delay;
> +
> + unsigned int dsi_lanes;
> +};
> +
> +struct hx8369a {
> + struct device *dev;
> + struct drm_panel panel;
> +
> + const struct hx8369a_panel_desc *pd;
> +
> + struct regulator_bulk_data supplies[5];
> + struct gpio_desc *reset_gpio;
> + struct gpio_desc *bs_gpio[4];
> + u8 res_sel;
> +};
> +
> +static inline struct hx8369a *panel_to_hx8369a(struct drm_panel *panel)
> +{
> + return container_of(panel, struct hx8369a, panel);
> +}
> +
> +static int hx8369a_dcs_write(struct hx8369a *ctx, const char *func,
> + const void *data, size_t len)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + ssize_t ret;
> +
> + ret = mipi_dsi_dcs_write_buffer(dsi, data, len);
> + if (ret < 0) {
> + dev_err(ctx->dev, "%s failed: %d\n", func, ret);
> + return ret;
> + }
> + return 0;
Nitpick. You can replace 4 lines above with:
if (ret < 0)
dev_err(ctx->dev, "%s failed: %d\n", func, ret);
return ret;
> +}
> +
> +#define hx8369a_dcs_write_seq(ctx, seq...) \
> +({ \
> + const u8 d[] = { seq }; \
> + BUILD_BUG_ON_MSG(ARRAY_SIZE(d) > 64, \
> + "DCS sequence too big for stack"); \
> + hx8369a_dcs_write(ctx, __func__, d, ARRAY_SIZE(d)); \
> +})
> +
> +#define hx8369a_dcs_write_seq_static(ctx, seq...) \
> +({ \
> + static const u8 d[] = { seq }; \
> + hx8369a_dcs_write(ctx, __func__, d, ARRAY_SIZE(d)); \
> +})
> +
> +static int hx8369a_dsi_set_display_related_register(struct hx8369a *ctx)
> +{
> + u8 sec_p = (ctx->res_sel << 4) | 0x03;
> +
> + return hx8369a_dcs_write_seq(ctx, SETDISP, 0x00, sec_p, 0x03,
> + 0x03, 0x70, 0x00, 0xff, 0x00, 0x00, 0x00,
> + 0x00, 0x03, 0x03, 0x00, 0x01);
> +}
> +
> +static int hx8369a_dsi_set_display_waveform_cycle(struct hx8369a *ctx)
> +{
> + return hx8369a_dcs_write_seq_static(ctx, SETCYC, 0x00, 0x1d,
> + 0x5f, 0x0e, 0x06);
> +}
> +
> +static int hx8369a_dsi_set_gip(struct hx8369a *ctx)
> +{
> + return hx8369a_dcs_write_seq_static(ctx, SETGIP, 0x00, 0x04,
> + 0x03, 0x00, 0x01, 0x05, 0x1c, 0x70,
> + 0x01, 0x03, 0x00, 0x00, 0x40, 0x06,
> + 0x51, 0x07, 0x00, 0x00, 0x41, 0x06,
> + 0x50, 0x07, 0x07, 0x0f, 0x04);
> +}
> +
> +static int hx8369a_dsi_set_power(struct hx8369a *ctx)
> +{
> + return hx8369a_dcs_write_seq_static(ctx, SETPOWER, 0x01, 0x00,
> + 0x34, 0x06, 0x00, 0x0f, 0x0f, 0x2a,
> + 0x32, 0x3f, 0x3f, 0x07, 0x3a, 0x01,
> + 0xe6, 0xe6, 0xe6, 0xe6, 0xe6);
> +}
> +
> +static int hx8369a_dsi_set_vcom_voltage(struct hx8369a *ctx)
> +{
> + return hx8369a_dcs_write_seq_static(ctx, SETVCOM, 0x56, 0x56);
> +}
> +
> +static int hx8369a_dsi_set_panel(struct hx8369a *ctx)
> +{
> + return hx8369a_dcs_write_seq_static(ctx, SETPANEL, 0x02);
> +}
> +
> +static int hx8369a_dsi_set_gamma_curve(struct hx8369a *ctx)
> +{
> + return hx8369a_dcs_write_seq_static(ctx, SETGAMMA, 0x00, 0x1d,
> + 0x22, 0x38, 0x3d, 0x3f, 0x2e, 0x4a,
> + 0x06, 0x0d, 0x0f, 0x13, 0x15, 0x13,
> + 0x16, 0x10, 0x19, 0x00, 0x1d, 0x22,
> + 0x38, 0x3d, 0x3f, 0x2e, 0x4a, 0x06,
> + 0x0d, 0x0f, 0x13, 0x15, 0x13, 0x16,
> + 0x10, 0x19);
> +}
> +
> +static int hx8369a_dsi_set_mipi(struct hx8369a *ctx)
> +{
> + u8 eleventh_p = ctx->pd->dsi_lanes == 2 ? 0x11 : 0x10;
> +
> + return hx8369a_dcs_write_seq(ctx, SETMIPI, 0x00, 0xa0, 0xc6,
> + 0x00, 0x0a, 0x00, 0x10, 0x30, 0x6f,
> + 0x02, eleventh_p, 0x18, 0x40);
> +}
> +
> +static int hx8369a_dsi_set_interface_pixel_fomat(struct hx8369a *ctx)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + u8 format;
> + int ret;
> +
> + switch (dsi->format) {
> + case MIPI_DSI_FMT_RGB888:
> + case MIPI_DSI_FMT_RGB666:
> + format = 0x77;
> + break;
> + case MIPI_DSI_FMT_RGB565:
> + format = 0x55;
> + break;
> + case MIPI_DSI_FMT_RGB666_PACKED:
> + format = 0x66;
> + break;
> + default:
> + dev_err(ctx->dev, "unsupported DSI pixel format\n");
> + return -EINVAL;
> + }
> +
> + ret = mipi_dsi_dcs_set_pixel_format(dsi, format);
> + if (ret < 0)
> + dev_err(ctx->dev, "%s failed: %d\n", __func__, ret);
> + return ret;
> +}
This functions could be also DSI helper, it is not specific to this panel,
but it is just a suggestion.
> +
> +static int hx8369a_dsi_set_column_address(struct hx8369a *ctx)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + const struct drm_display_mode *mode = ctx->pd->mode;
> + int ret;
> +
> + ret = mipi_dsi_dcs_set_column_address(dsi, 0, mode->hdisplay - 1);
> + if (ret < 0)
> + dev_err(ctx->dev, "%s failed: %d\n", __func__, ret);
> + return ret;
> +}
> +
> +static int hx8369a_dsi_set_page_address(struct hx8369a *ctx)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + const struct drm_display_mode *mode = ctx->pd->mode;
> + int ret;
> +
> + ret = mipi_dsi_dcs_set_page_address(dsi, 0, mode->vdisplay - 1);
> + if (ret < 0)
> + dev_err(ctx->dev, "%s failed: %d\n", __func__, ret);
> + return ret;
> +}
> +
> +static int hx8369a_dsi_write_display_brightness(struct hx8369a *ctx,
> + u8 brightness)
> +{
> + return hx8369a_dcs_write_seq(ctx, WRDISBV, brightness);
> +}
> +
> +static int hx8369a_dsi_write_cabc(struct hx8369a *ctx)
> +{
> + return hx8369a_dcs_write_seq_static(ctx, WRCABC, 0x01);
> +}
> +
> +static int hx8369a_dsi_write_control_display(struct hx8369a *ctx)
> +{
> + return hx8369a_dcs_write_seq_static(ctx, WRCTRLD, 0x24);
> +}
> +
> +#define hx8369a_dsi_init_helper(ctx, ret, name) \
> +({ \
> + ret = hx8369a_dsi_##name(ctx); \
> + if (ret < 0) \
> + return ret; \
> +})
Yeah, another hack to get rid of redundant code :)
Two ugly things here: ## and return from macro.
> +
> +static int hx8369a_dsi_panel_init(struct hx8369a *ctx)
> +{
> + int ret;
> +
> + hx8369a_dsi_init_helper(ctx, ret, set_display_related_register);
> + hx8369a_dsi_init_helper(ctx, ret, set_display_waveform_cycle);
> + hx8369a_dsi_init_helper(ctx, ret, set_gip);
> + hx8369a_dsi_init_helper(ctx, ret, set_power);
> + hx8369a_dsi_init_helper(ctx, ret, set_vcom_voltage);
> + hx8369a_dsi_init_helper(ctx, ret, set_panel);
> + hx8369a_dsi_init_helper(ctx, ret, set_gamma_curve);
> + hx8369a_dsi_init_helper(ctx, ret, set_mipi);
> + hx8369a_dsi_init_helper(ctx, ret, set_interface_pixel_fomat);
> + hx8369a_dsi_init_helper(ctx, ret, set_column_address);
> + hx8369a_dsi_init_helper(ctx, ret, set_page_address);
> + hx8369a_dsi_init_helper(ctx, ret, write_cabc);
> + hx8369a_dsi_init_helper(ctx, ret, write_control_display);
Maybe it would be better to replace the hack above with something like:
{
int (*)(struct hx8369a *ctx) funcs[] = {
hx8369a_dsi_set_display_related_register,
hx8369a_dsi_set_display_waveform_cycle,
...
};
int ret, i;
for (i = 0; i < ARRAY_SIZE(funcs); ++i) {
ret = funcs[i](ctx);
if (ret)
return ret;
}
> +
> + return 0;
> +}
> +
> +static int hx8369a_dsi_set_extension_command(struct hx8369a *ctx)
> +{
> + return hx8369a_dcs_write_seq_static(ctx, SETEXTC, 0xff, 0x83, 0x69);
> +}
> +
> +static int hx8369a_dsi_set_maximum_return_packet_size(struct hx8369a *ctx,
> + u16 size)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + int ret;
> +
> + ret = mipi_dsi_set_maximum_return_packet_size(dsi, size);
> + if (ret < 0)
> + dev_err(ctx->dev,
> + "error %d setting maximum return packet size to %d\n",
> + ret, size);
> + return ret;
> +}
> +
> +static int hx8369a_dsi_set_sequence(struct hx8369a *ctx)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + int ret;
> +
> + ret = hx8369a_dsi_set_extension_command(ctx);
> + if (ret < 0)
> + goto out;
> +
> + ret = hx8369a_dsi_set_maximum_return_packet_size(ctx, 4);
> + if (ret < 0)
> + goto out;
> +
> + ret = hx8369a_dsi_panel_init(ctx);
> + if (ret < 0)
> + goto out;
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(ctx->dev, "failed to exit sleep mode: %d\n", ret);
> + goto out;
> + }
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret < 0) {
> + dev_err(ctx->dev, "failed to set display on: %d\n", ret);
> + goto out;
> + }
> +
> + /*
> + * It's necessary to wait 120msec after sending the Sleep Out
> + * command before Sleep In command can be sent, according to
> + * the HX8369A data sheet.
> + */
> + msleep(120);
> +out:
> + return ret;
> +}
> +
> +static int hx8369a_dsi_disable(struct drm_panel *panel)
> +{
> + struct hx8369a *ctx = panel_to_hx8369a(panel);
> +
> + return hx8369a_dsi_write_display_brightness(ctx,
> + HX8369A_MIN_BRIGHTNESS);
> +}
> +
> +static int hx8369a_dsi_unprepare(struct drm_panel *panel)
> +{
> + struct hx8369a *ctx = panel_to_hx8369a(panel);
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + int ret;
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(ctx->dev, "failed to enter sleep mode: %d\n", ret);
> + goto out;
> + }
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret < 0) {
> + dev_err(ctx->dev, "failed to set display off: %d\n", ret);
> + goto out;
> + }
> +
> + /*
> + * This is to allow time for the supply voltages and clock
> + * circuits to stablize, according to the HX8369A data sheet.
> + */
> + msleep(5);
> +out:
> + return ret;
> +}
> +
> +static int hx8369a_dsi_prepare(struct drm_panel *panel)
> +{
> + struct hx8369a *ctx = panel_to_hx8369a(panel);
> +
> + return hx8369a_dsi_set_sequence(ctx);
> +}
> +
> +static int hx8369a_dsi_enable(struct drm_panel *panel)
> +{
> + struct hx8369a *ctx = panel_to_hx8369a(panel);
> +
> + return hx8369a_dsi_write_display_brightness(ctx,
> + HX8369A_MAX_BRIGHTNESS);
> +}
> +
> +static int hx8369a_get_modes(struct drm_panel *panel)
> +{
> + struct drm_connector *connector = panel->connector;
> + struct drm_device *drm = panel->drm;
> + struct hx8369a *ctx = panel_to_hx8369a(panel);
> + struct drm_display_mode *mode;
> + const struct drm_display_mode *m = ctx->pd->mode;
> +
> + mode = drm_mode_duplicate(drm, m);
> + if (!mode) {
> + dev_err(drm->dev, "failed to add mode %ux%u@%u\n",
> + m->hdisplay, m->vdisplay, m->vrefresh);
> + return 0;
> + }
> +
> + drm_mode_set_name(mode);
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> +
> + connector->display_info.bpc = 8;
> + connector->display_info.width_mm = mode->width_mm;
> + connector->display_info.height_mm = mode->height_mm;
> +
> + drm_mode_probed_add(connector, mode);
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs hx8369a_dsi_drm_funcs = {
> + .disable = hx8369a_dsi_disable,
> + .unprepare = hx8369a_dsi_unprepare,
> + .prepare = hx8369a_dsi_prepare,
> + .enable = hx8369a_dsi_enable,
> + .get_modes = hx8369a_get_modes,
> +};
> +
> +static int hx8369a_power_on(struct hx8369a *ctx)
> +{
> + int ret;
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> + if (ret < 0)
> + return ret;
> +
> + msleep(ctx->pd->power_on_delay);
> +
> + gpiod_set_value(ctx->reset_gpio, 1);
> + usleep_range(50, 60);
> + gpiod_set_value(ctx->reset_gpio, 0);
> +
> + msleep(ctx->pd->reset_delay);
> +
> + return 0;
> +}
> +
> +static int hx8369a_power_off(struct hx8369a *ctx)
> +{
> + return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies),
> + ctx->supplies);
> +}
> +
> +static void hx8369a_vm_to_res_sel(struct hx8369a *ctx)
> +{
> + const struct drm_display_mode *mode = ctx->pd->mode;
> +
> + switch (mode->hdisplay) {
> + case 480:
> + switch (mode->vdisplay) {
> + case 864:
> + ctx->res_sel = HX8369A_RES_480_864;
> + break;
> + case 854:
> + ctx->res_sel = HX8369A_RES_480_854;
> + break;
> + case 800:
> + ctx->res_sel = HX8369A_RES_480_800;
> + break;
> + case 640:
> + ctx->res_sel = HX8369A_RES_480_640;
> + break;
> + case 720:
> + ctx->res_sel = HX8369A_RES_480_720;
> + break;
> + default:
> + break;
> + }
> + break;
> + case 360:
> + if (mode->vdisplay == 640)
> + ctx->res_sel = HX8369A_RES_360_640;
> + break;
> + default:
> + break;
> + }
> +}
> +
> +static const struct drm_display_mode truly_tft480800_16_e_mode = {
> + .clock = 26400,
> + .hdisplay = 480,
> + .hsync_start = 480 + 8,
> + .hsync_end = 480 + 8 + 8,
> + .htotal = 480 + 8 + 8 + 8,
> + .vdisplay = 800,
> + .vsync_start = 800 + 6,
> + .vsync_end = 800 + 6 + 6,
> + .vtotal = 800 + 6 + 6 + 6,
> + .vrefresh = 60,
> + .width_mm = 45,
> + .height_mm = 76,
> +};
> +
> +static const struct hx8369a_panel_desc truly_tft480800_16_e_dsi = {
> + .mode = &truly_tft480800_16_e_mode,
> + .power_on_delay = 10,
> + .reset_delay = 10,
> + .dsi_lanes = 2,
> +};
> +
> +static const struct of_device_id hx8369a_dsi_of_match[] = {
> + {
> + .compatible = "truly,tft480800-16-e-dsi",
> + .data = &truly_tft480800_16_e_dsi,
> + }, {
> + /* sentinel */
> + },
> +};
> +MODULE_DEVICE_TABLE(of, hx8369a_dsi_of_match);
> +
> +static int hx8369a_dsi_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + const struct of_device_id *of_id =
> + of_match_device(hx8369a_dsi_of_match, dev);
> + struct hx8369a *ctx;
> + int ret, i;
> +
> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + ctx->dev = dev;
> +
> + if (of_id) {
> + ctx->pd = of_id->data;
> + } else {
> + dev_err(dev, "cannot find compatible device\n");
> + return -ENODEV;
> + }
> +
> + hx8369a_vm_to_res_sel(ctx);
> +
> + ctx->supplies[0].supply = "vdd1";
> + ctx->supplies[1].supply = "vdd2";
> + ctx->supplies[2].supply = "vdd3";
> + ctx->supplies[3].supply = "dsi-vcc";
> + ctx->supplies[4].supply = "vpp";
> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
> + ctx->supplies);
> + if (ret < 0) {
> + dev_info(dev, "failed to get regulators: %d\n", ret);
> + return ret;
> + }
> +
> + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->reset_gpio)) {
> + dev_info(dev, "cannot get reset-gpios %ld\n",
> + PTR_ERR(ctx->reset_gpio));
> + return PTR_ERR(ctx->reset_gpio);
> + }
> +
> + for (i = 0; i < 4; i++) {
> + ctx->bs_gpio[i] = devm_gpiod_get_index(dev, "bs", i,
> + GPIOD_OUT_HIGH);
> + if (!IS_ERR_OR_NULL(ctx->bs_gpio[i]))
> + dev_dbg(dev, "bs%d-gpio is configured\n", i);
Are you sure you want to continue probe on error during getting gpios?
After addressing above comments you can add:
Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Regards
Andrzej
> + }
> +
> + ret = hx8369a_power_on(ctx);
> + if (ret < 0) {
> + dev_err(dev, "cannot power on\n");
> + return ret;
> + }
> +
> + drm_panel_init(&ctx->panel);
> + ctx->panel.dev = dev;
> + ctx->panel.funcs = &hx8369a_dsi_drm_funcs;
> +
> + ret = drm_panel_add(&ctx->panel);
> + if (ret < 0)
> + return ret;
> +
> + mipi_dsi_set_drvdata(dsi, ctx);
> +
> + dsi->lanes = ctx->pd->dsi_lanes;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
> + MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0)
> + drm_panel_remove(&ctx->panel);
> +
> + return ret;
> +}
> +
> +static int hx8369a_dsi_remove(struct mipi_dsi_device *dsi)
> +{
> + struct hx8369a *ctx = mipi_dsi_get_drvdata(dsi);
> +
> + mipi_dsi_detach(dsi);
> + drm_panel_remove(&ctx->panel);
> + return hx8369a_power_off(ctx);
> +}
> +
> +static struct mipi_dsi_driver hx8369a_dsi_driver = {
> + .probe = hx8369a_dsi_probe,
> + .remove = hx8369a_dsi_remove,
> + .driver = {
> + .name = "panel-hx8369a-dsi",
> + .of_match_table = hx8369a_dsi_of_match,
> + },
> +};
> +module_mipi_dsi_driver(hx8369a_dsi_driver);
> +
> +MODULE_DESCRIPTION("Himax HX8369A panel driver");
> +MODULE_AUTHOR("Liu Ying <Ying.Liu@xxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/