RE: [PATCH v2 3/5] usb: dwc2: Add generic PHY framework support for dwc2 usb controler platform driver.

[Paul Zimmerman]

> From: Yunzhi Li [mailto:lyz@xxxxxxxxxxxxxx]
> Sent: Friday, December 05, 2014 4:52 AM
> 
> Get PHY parameters from devicetree and power off usb PHY during
> system suspend.
> 
> Signed-off-by: Yunzhi Li <lyz@xxxxxxxxxxxxxx>
> ---
> 
>  drivers/usb/dwc2/gadget.c   | 33 ++++++++++++---------------------
>  drivers/usb/dwc2/platform.c | 34 ++++++++++++++++++++++++++++++++++
>  2 files changed, 46 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> index 200168e..2601c61 100644
> --- a/drivers/usb/dwc2/gadget.c
> +++ b/drivers/usb/dwc2/gadget.c
> @@ -3410,8 +3410,6 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
>  {
>  	struct device *dev = hsotg->dev;
>  	struct s3c_hsotg_plat *plat = dev->platform_data;
> -	struct phy *phy;
> -	struct usb_phy *uphy;
>  	struct s3c_hsotg_ep *eps;
>  	int epnum;
>  	int ret;
> @@ -3421,30 +3419,23 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
>  	hsotg->phyif = GUSBCFG_PHYIF16;
> 
>  	/*
> -	 * Attempt to find a generic PHY, then look for an old style
> -	 * USB PHY, finally fall back to pdata
> +	 * If platform probe couldn't find a generic PHY or an old style
> +	 * USB PHY, fall back to pdata
>  	 */
> -	phy = devm_phy_get(dev, "usb2-phy");
> -	if (IS_ERR(phy)) {
> -		uphy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> -		if (IS_ERR(uphy)) {
> -			/* Fallback for pdata */
> -			plat = dev_get_platdata(dev);
> -			if (!plat) {
> -				dev_err(dev,
> -				"no platform data or transceiver defined\n");
> -				return -EPROBE_DEFER;
> -			}
> -			hsotg->plat = plat;
> -		} else
> -			hsotg->uphy = uphy;
> -	} else {
> -		hsotg->phy = phy;
> +	if (IS_ERR_OR_NULL(hsotg->phy) && IS_ERR_OR_NULL(hsotg->uphy)) {
> +		plat = dev_get_platdata(dev);
> +		if (!plat) {
> +			dev_err(dev,
> +			"no platform data or transceiver defined\n");
> +			return -EPROBE_DEFER;
> +		}
> +		hsotg->plat = plat;
> +	} else if (hsotg->phy) {

You have changed the behavior here. Previously, the driver would work
even if there were no phys or pdata defined. Now it will return
-EPROBE_DEFER instead. Are you sure that won't break any existing
platforms?

>  		/*
>  		 * If using the generic PHY framework, check if the PHY bus
>  		 * width is 8-bit and set the phyif appropriately.
>  		 */
> -		if (phy_get_bus_width(phy) == 8)
> +		if (phy_get_bus_width(hsotg->phy) == 8)
>  			hsotg->phyif = GUSBCFG_PHYIF8;
>  	}
> 
> diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
> index 6a795aa..739d14f 100644
> --- a/drivers/usb/dwc2/platform.c
> +++ b/drivers/usb/dwc2/platform.c
> @@ -155,6 +155,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
>  	struct dwc2_core_params defparams;
>  	struct dwc2_hsotg *hsotg;
>  	struct resource *res;
> +	struct phy *phy;
> +	struct usb_phy *uphy;
>  	int retval;
>  	int irq;
> 
> @@ -212,6 +214,24 @@ static int dwc2_driver_probe(struct platform_device *dev)
> 
>  	hsotg->dr_mode = of_usb_get_dr_mode(dev->dev.of_node);
> 
> +	/*
> +	 * Attempt to find a generic PHY, then look for an old style
> +	 * USB PHY
> +	 */
> +	phy = devm_phy_get(&dev->dev, "usb2-phy");
> +	if (IS_ERR(phy)) {
> +		hsotg->phy = NULL;
> +		uphy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
> +		if (IS_ERR(uphy))
> +			hsotg->uphy = NULL;
> +		else
> +			hsotg->uphy = uphy;
> +	} else {
> +		hsotg->phy = phy;
> +		phy_power_on(hsotg->phy);
> +		phy_init(hsotg->phy);
> +	}
> +
>  	spin_lock_init(&hsotg->lock);
>  	mutex_init(&hsotg->init_mutex);
>  	retval = dwc2_gadget_init(hsotg, irq);
> @@ -233,6 +253,14 @@ static int __maybe_unused dwc2_suspend(struct device *dev)
> 
>  	if (dwc2_is_device_mode(dwc2))
>  		ret = s3c_hsotg_suspend(dwc2);
> +	else {

Kernel style says that both branches of the if() should have braces
here.

> +		if (dwc2->lx_state == DWC2_L0)
> +			return 0;
> +		if (dwc2->phy) {
> +			phy_exit(dwc2->phy);
> +			phy_power_off(dwc2->phy);
> +		}

Minor nit: no need to test dwc2->phy for NULL here, the phy functions
handle a NULL pointer just fine.

> +	}
>  	return ret;
>  }
> 
> @@ -243,6 +271,12 @@ static int __maybe_unused dwc2_resume(struct device *dev)
> 
>  	if (dwc2_is_device_mode(dwc2))
>  		ret = s3c_hsotg_resume(dwc2);
> +	else {

Braces.

> +		if (dwc2->phy) {
> +			phy_power_on(dwc2->phy);
> +			phy_init(dwc2->phy);
> +		}
> +	}
>  	return ret;
>  }
> 

-- 
Paul

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/