Re: [PATCH v12 7/7] ARM: kprobes: enable OPTPROBES for ARM 32

From: Jon Medhurst (Tixy)
Date: Thu Dec 04 2014 - 11:21:32 EST


On Thu, 2014-12-04 at 13:36 +0800, Wang Nan wrote:
> This patch introduce kprobeopt for ARM 32.
>
> Limitations:
> - Currently only kernel compiled with ARM ISA is supported.
>
> - Offset between probe point and optinsn slot must not larger than
> 32MiB. Masami Hiramatsu suggests replacing 2 words, it will make
> things complex. Futher patch can make such optimization.
>
> Kprobe opt on ARM is relatively simpler than kprobe opt on x86 because
> ARM instruction is always 4 bytes aligned and 4 bytes long. This patch
> replace probed instruction by a 'b', branch to trampoline code and then
> calls optimized_callback(). optimized_callback() calls opt_pre_handler()
> to execute kprobe handler. It also emulate/simulate replaced instruction.
>
> When unregistering kprobe, the deferred manner of unoptimizer may leave
> branch instruction before optimizer is called. Different from x86_64,
> which only copy the probed insn after optprobe_template_end and
> reexecute them, this patch call singlestep to emulate/simulate the insn
> directly. Futher patch can optimize this behavior.
>
> Signed-off-by: Wang Nan <wangnan0@xxxxxxxxxx>
> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@xxxxxxxxxxx>
> Cc: Jon Medhurst (Tixy) <tixy@xxxxxxxxxx>
> Cc: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
> Cc: Will Deacon <will.deacon@xxxxxxx>


I have retested this patch and on one of the arm test cases I get an
undefined instruction exception in kprobe_arm_test_cases. When this
happens PC points to the second nop below.


80028a38: e320f000 nop {0}
80028a3c: e11000b2 ldrh r0, [r0, -r2]
80028a40: e320f000 nop {0}

As all three instructions will have probes on them during testing, and
un-optimised probes are implemented by using an undefined instruction to
act as a breakpoint, my first thought was that we have a race condition
somewhere with adding, removing or optimizing probes. Though a reboot a
retest failed in the same way on the same instruction, so I'm not 100%
convinced about strictly timing related bugs.

Meanwhile, I have some review comments of the code below...


>
> v1 -> v2:
> - Improvement: if replaced instruction is conditional, generate a
> conditional branch instruction for it;
> - Introduces RELATIVEJUMP_OPCODES due to ARM kprobe_opcode_t is 4
> bytes;
> - Removes size field in struct arch_optimized_insn;
> - Use arm_gen_branch() to generate branch instruction;
> - Remove all recover logic: ARM doesn't use tail buffer, no need
> recover replaced instructions like x86;
> - Remove incorrect CONFIG_THUMB checking;
> - can_optimize() always returns true if address is well aligned;
> - Improve optimized_callback: using opt_pre_handler();
> - Bugfix: correct range checking code and improve comments;
> - Fix commit message.
>
> v2 -> v3:
> - Rename RELATIVEJUMP_OPCODES to MAX_COPIED_INSNS;
> - Remove unneeded checking:
> arch_check_optimized_kprobe(), can_optimize();
> - Add missing flush_icache_range() in arch_prepare_optimized_kprobe();
> - Remove unneeded 'return;'.
>
> v3 -> v4:
> - Use __mem_to_opcode_arm() to translate copied_insn to ensure it
> works in big endian kernel;
> - Replace 'nop' placeholder in trampoline code template with
> '.long 0' to avoid confusion: reader may regard 'nop' as an
> instruction, but it is value in fact.
>
> v4 -> v5:
> - Don't optimize stack store operations.
> - Introduce prepared field to arch_optimized_insn to indicate whether
> it is prepared. Similar to size field with x86. See v1 -> v2.
>
> v5 -> v6:
> - Dynamically reserve stack according to instruction.
> - Rename: kprobes-opt.c -> kprobes-opt-arm.c.
> - Set op->optinsn.insn after all works are done.
>
> v6 -> v7:
> - Using checker to check stack consumption.
>
> v7 -> v8:
> - Small code adjustments.
>
> v8 -> v9:
> - Utilize original kprobe passed to arch_prepare_optimized_kprobe()
> to avoid copy ainsn twice.
> - A bug in arch_prepare_optimized_kprobe() is found and fixed.
>
> v9 -> v10:
> - Commit message improvements.
>
> v10 -> v11:
> - Move to arch/arm/probes/, insn.h is moved to arch/arm/include/asm.
> - Code cleanup.
> - Bugfix based on Tixy's test result:
> - Trampoline deal with ARM -> Thumb transision instructions and
> AEABI stack alignment requirement correctly.
> - Trampoline code buffer should start at 4 byte aligned address.
> We enforces it in this series by using macro to wrap 'code' var.
>
> v11 -> v12:
> - Remove trampoline code stack trick and use r4 to save original
> stack.
> - Remove trampoline code buffer alignment trick.
> - Names of files are changed.
> ---


Looks like you accidentally have the '---' break in the wrong place,
should be before the version changes description.


> arch/arm/Kconfig | 1 +
> arch/arm/{kernel => include/asm}/insn.h | 0
> arch/arm/include/asm/kprobes.h | 34 ++++
> arch/arm/kernel/Makefile | 2 +-
> arch/arm/kernel/ftrace.c | 3 +-
> arch/arm/kernel/jump_label.c | 3 +-
> arch/arm/probes/kprobes/Makefile | 1 +
> arch/arm/probes/kprobes/core.c | 1 +
> arch/arm/probes/kprobes/opt-arm.c | 322 ++++++++++++++++++++++++++++++++
> 9 files changed, 362 insertions(+), 5 deletions(-)
> rename arch/arm/{kernel => include/asm}/insn.h (100%)
> create mode 100644 arch/arm/probes/kprobes/opt-arm.c
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 89c4b5c..8281cea 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -59,6 +59,7 @@ config ARM
> select HAVE_MEMBLOCK
> select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
> select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
> + select HAVE_OPTPROBES if (!THUMB2_KERNEL)
> select HAVE_PERF_EVENTS
> select HAVE_PERF_REGS
> select HAVE_PERF_USER_STACK_DUMP
> diff --git a/arch/arm/kernel/insn.h b/arch/arm/include/asm/insn.h
> similarity index 100%
> rename from arch/arm/kernel/insn.h
> rename to arch/arm/include/asm/insn.h
> diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h
> index 56f9ac6..5574008 100644
> --- a/arch/arm/include/asm/kprobes.h
> +++ b/arch/arm/include/asm/kprobes.h
> @@ -50,5 +50,39 @@ int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
> int kprobe_exceptions_notify(struct notifier_block *self,
> unsigned long val, void *data);
>
> +/* optinsn template addresses */
> +extern __visible kprobe_opcode_t optprobe_template_entry;
> +extern __visible kprobe_opcode_t optprobe_template_val;
> +extern __visible kprobe_opcode_t optprobe_template_call;
> +extern __visible kprobe_opcode_t optprobe_template_end;
> +extern __visible kprobe_opcode_t optprobe_template_sub_sp;
> +extern __visible kprobe_opcode_t optprobe_template_add_sp;
> +
> +/*
> + * Plus 4 for potential alignment adjustment. See comments
> + * in arch_prepare_optimized_kprobe() in
> + * arch/arm/probes/kprobes-opt-arm.c .
> + */
> +#define MAX_OPTIMIZED_LENGTH 4
> +#define MAX_OPTINSN_SIZE \
> + (((unsigned long)&optprobe_template_end - \
> + (unsigned long)&optprobe_template_entry) + 4)

Is this "+ 4" needed now? I think it might be left over from the
previous version where you were aligning code in the slot to a 4 byte
boundary.



> +#define RELATIVEJUMP_SIZE 4
> +
> +struct arch_optimized_insn {
> + /*
> + * copy of the original instructions.
> + * Different from x86, ARM kprobe_opcode_t is u32.
> + */
> +#define MAX_COPIED_INSN (DIV_ROUND_UP(RELATIVEJUMP_SIZE, sizeof(kprobe_opcode_t)))
> + kprobe_opcode_t copied_insn[MAX_COPIED_INSN];
> + /* detour code buffer */
> + kprobe_opcode_t *insn;
> + /*
> + * We always copy one instruction on arm32,
> + * size always be 4, so didn't like x86, there is no
> + * size field.

The above comment doesn't parse very well, how about...

* We always copy one instruction on arm,
* so size will always be 4, and unlike x86, there is no
* need for a size field.


> + */
> +};
>
> #endif /* _ARM_KPROBES_H */
> diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
> index 40d3e00..1d0f4e7 100644
> --- a/arch/arm/kernel/Makefile
> +++ b/arch/arm/kernel/Makefile
> @@ -52,7 +52,7 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o insn.o
> obj-$(CONFIG_JUMP_LABEL) += jump_label.o insn.o patch.o
> obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
> # Main staffs in KPROBES are in arch/arm/probes/ .
> -obj-$(CONFIG_KPROBES) += patch.o
> +obj-$(CONFIG_KPROBES) += patch.o insn.o
> obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
> obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
> obj-$(CONFIG_KGDB) += kgdb.o
> diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
> index af9a8a9..ec7e332 100644
> --- a/arch/arm/kernel/ftrace.c
> +++ b/arch/arm/kernel/ftrace.c
> @@ -19,8 +19,7 @@
> #include <asm/cacheflush.h>
> #include <asm/opcodes.h>
> #include <asm/ftrace.h>
> -
> -#include "insn.h"
> +#include <asm/insn.h>
>
> #ifdef CONFIG_THUMB2_KERNEL
> #define NOP 0xf85deb04 /* pop.w {lr} */
> diff --git a/arch/arm/kernel/jump_label.c b/arch/arm/kernel/jump_label.c
> index c6c73ed..35a8fbb 100644
> --- a/arch/arm/kernel/jump_label.c
> +++ b/arch/arm/kernel/jump_label.c
> @@ -1,8 +1,7 @@
> #include <linux/kernel.h>
> #include <linux/jump_label.h>
> #include <asm/patch.h>
> -
> -#include "insn.h"
> +#include <asm/insn.h>
>
> #ifdef HAVE_JUMP_LABEL
>
> diff --git a/arch/arm/probes/kprobes/Makefile b/arch/arm/probes/kprobes/Makefile
> index bc8d504..76a36bf 100644
> --- a/arch/arm/probes/kprobes/Makefile
> +++ b/arch/arm/probes/kprobes/Makefile
> @@ -7,5 +7,6 @@ obj-$(CONFIG_KPROBES) += actions-thumb.o checkers-thumb.o
> test-kprobes-objs += test-thumb.o
> else
> obj-$(CONFIG_KPROBES) += actions-arm.o checkers-arm.o
> +obj-$(CONFIG_OPTPROBES) += opt-arm.o
> test-kprobes-objs += test-arm.o
> endif
> diff --git a/arch/arm/probes/kprobes/core.c b/arch/arm/probes/kprobes/core.c
> index 3a58db4..4a2cf40 100644
> --- a/arch/arm/probes/kprobes/core.c
> +++ b/arch/arm/probes/kprobes/core.c
> @@ -630,6 +630,7 @@ static struct undef_hook kprobes_arm_break_hook = {
>
> int __init arch_init_kprobes()
> {
> +

Looks like an accidental blank line got added here.


> arm_probes_decode_init();
> #ifdef CONFIG_THUMB2_KERNEL
> register_undef_hook(&kprobes_thumb16_break_hook);
> diff --git a/arch/arm/probes/kprobes/opt-arm.c b/arch/arm/probes/kprobes/opt-arm.c
> new file mode 100644
> index 0000000..46e4474
> --- /dev/null
> +++ b/arch/arm/probes/kprobes/opt-arm.c
> @@ -0,0 +1,322 @@
> +/*
> + * Kernel Probes Jump Optimization (Optprobes)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
> + *
> + * Copyright (C) IBM Corporation, 2002, 2004
> + * Copyright (C) Hitachi Ltd., 2012
> + * Copyright (C) Huawei Inc., 2014
> + */
> +
> +#include <linux/kprobes.h>
> +#include <linux/jump_label.h>
> +#include <asm/kprobes.h>
> +#include <asm/cacheflush.h>
> +/* for arm_gen_branch */
> +#include <asm/insn.h>
> +/* for patch_text */
> +#include <asm/patch.h>
> +
> +/*
> + * NOTE: the first sub and add instruction will be modified according
> + * to the stack cost of the instruction.
> + */
> +asm (
> + ".global optprobe_template_entry\n"
> + "optprobe_template_entry:\n"
> + ".global optprobe_template_sub_sp\n"
> + "optprobe_template_sub_sp:"
> + " sub sp, sp, #0xff\n"
> + " stmia sp, {r0 - r14} \n"
> + ".global optprobe_template_add_sp\n"
> + "optprobe_template_add_sp:"
> + " add r3, sp, #0xff\n"
> + " str r3, [sp, #52]\n"
> + " mrs r4, cpsr\n"
> + " str r4, [sp, #64]\n"
> + " mov r1, sp\n"
> + " ldr r0, 1f\n"
> + " ldr r2, 2f\n"
> + /*
> + * AEABI requires a 8-bytes alignment stack. If
> + * SP % 8 != 0, alloc more bytes here.
> + */
> + " and r4, sp, #7\n"

We already know that the stack must be aligned to 4 bytes here, because
if it weren't, pushing the registers to the stack which we did earlier
would cause an exception. We are also assuming that alignment because
otherwise the pt_regs* we pass to optimized_callback would be
misaligned. So whilst ANDing with 7 is functionally correct I think it's
a bit misleading as it implies we aren't sure of the current alignment.

Therefore I suggest sticking with '4', which matches the method used by
the exception handling code in svc_entry to align the stack. It also
matches arch_prepare_optimized_kprobe which you have allocating only 4
extra bytes for alignment rather than 7.


> + " sub sp, sp, r4\n"
> + " blx r2\n"
> + " add sp, sp, r4\n"
> + " ldr r1, [sp, #64]\n"
> + " tst r1, #"__stringify(PSR_T_BIT)"\n"
> + " ldrne r2, [sp, #60]\n"
> + " orrne r2, #1\n"
> + " strne r2, [sp, #60] @ set bit0 of PC for thumb\n"
> + " msr cpsr_cxsf, r1\n"
> + " ldmia sp, {r0 - r15}\n"
> + ".global optprobe_template_val\n"
> + "optprobe_template_val:\n"
> + "1: .long 0\n"
> + ".global optprobe_template_call\n"
> + "optprobe_template_call:\n"
> + "2: .long 0\n"
> + ".global optprobe_template_end\n"
> + "optprobe_template_end:\n");
> +
> +#define TMPL_VAL_IDX \
> + ((unsigned long *)&optprobe_template_val - (unsigned long *)&optprobe_template_entry)
> +#define TMPL_CALL_IDX \
> + ((unsigned long *)&optprobe_template_call - (unsigned long *)&optprobe_template_entry)
> +#define TMPL_END_IDX \
> + ((unsigned long *)&optprobe_template_end - (unsigned long *)&optprobe_template_entry)
> +#define TMPL_ADD_SP \
> + ((unsigned long *)&optprobe_template_add_sp - (unsigned long *)&optprobe_template_entry)
> +#define TMPL_SUB_SP \
> + ((unsigned long *)&optprobe_template_sub_sp - (unsigned long *)&optprobe_template_entry)
> +
> +/*
> + * ARM can always optimize an instruction when using ARM ISA, except
> + * instructions like 'str r0, [sp, r1]' which store to stack and unable
> + * to determine stack space consumption statically.
> + */
> +int arch_prepared_optinsn(struct arch_optimized_insn *optinsn)
> +{
> + return optinsn->insn != NULL;
> +}
> +
> +/*
> + * In ARM ISA, kprobe opt always replace one instruction (4 bytes
> + * aligned and 4 bytes long). It is impossible to encounter another
> + * kprobe in the address range. So always return 0.
> + */
> +int arch_check_optimized_kprobe(struct optimized_kprobe *op)
> +{
> + return 0;
> +}
> +
> +/* Caller must ensure addr & 3 == 0 */
> +static int can_optimize(struct kprobe *kp)
> +{
> + if (kp->ainsn.stack_space < 0)
> + return 0;
> + /*
> + * 255 is the biggest imm can be used in 'sub r0, r0, #<imm>'.
> + * Number larger than 255 needs special encoding.
> + */
> + if (kp->ainsn.stack_space > 255 - sizeof(struct pt_regs))
> + return 0;
> + return 1;
> +}
> +
> +/* Free optimized instruction slot */
> +static void
> +__arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty)
> +{
> + if (op->optinsn.insn) {
> + free_optinsn_slot(op->optinsn.insn, dirty);
> + op->optinsn.insn = NULL;
> + }
> +}
> +
> +extern void kprobe_handler(struct pt_regs *regs);
> +
> +static void
> +optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
> +{
> + unsigned long flags;
> + struct kprobe *p = &op->kp;
> + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
> +
> + /* Save skipped registers */
> + regs->ARM_pc = (unsigned long)op->kp.addr;
> + regs->ARM_ORIG_r0 = ~0UL;
> +
> + local_irq_save(flags);
> +
> + if (kprobe_running()) {
> + kprobes_inc_nmissed_count(&op->kp);
> + } else {
> + __this_cpu_write(current_kprobe, &op->kp);
> + kcb->kprobe_status = KPROBE_HIT_ACTIVE;
> + opt_pre_handler(&op->kp, regs);
> + __this_cpu_write(current_kprobe, NULL);
> + }
> +
> + /* In each case, we must singlestep the replaced instruction. */
> + op->kp.ainsn.insn_singlestep(p->opcode, &p->ainsn, regs);
> +
> + local_irq_restore(flags);
> +}
> +
> +int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *orig)
> +{
> + kprobe_opcode_t *code;
> + unsigned long rel_chk;
> + unsigned long val;
> + unsigned long stack_protect = sizeof(struct pt_regs);
> +
> + if (!can_optimize(orig))
> + return -EILSEQ;
> +
> + /*
> + * 'code' must be 4-bytes aligned on arm, so we can use
> + * 'code[x] = y' without triggering alignment exception.
> + * Unfortunately get_optinsn_slot() uses module_alloc and
> + * doesn't ensure any alignment.
> + */

Don't think we need the above comment now, cerntainly not the last two
lines, because we've decided that slots are aligned after all.


> + code = get_optinsn_slot();
> + if (!code)
> + return -ENOMEM;
> +
> + /*
> + * Verify if the address gap is in 32MiB range, because this uses
> + * a relative jump.
> + *
> + * kprobe opt use a 'b' instruction to branch to optinsn.insn.
> + * According to ARM manual, branch instruction is:
> + *
> + * 31 28 27 24 23 0
> + * +------+---+---+---+---+----------------+
> + * | cond | 1 | 0 | 1 | 0 | imm24 |
> + * +------+---+---+---+---+----------------+
> + *
> + * imm24 is a signed 24 bits integer. The real branch offset is computed
> + * by: imm32 = SignExtend(imm24:'00', 32);
> + *
> + * So the maximum forward branch should be:
> + * (0x007fffff << 2) = 0x01fffffc = 0x1fffffc
> + * The maximum backword branch should be:
> + * (0xff800000 << 2) = 0xfe000000 = -0x2000000
> + *
> + * We can simply check (rel & 0xfe000003):
> + * if rel is positive, (rel & 0xfe000000) shoule be 0
> + * if rel is negitive, (rel & 0xfe000000) should be 0xfe000000
> + * the last '3' is used for alignment checking.
> + */
> + rel_chk = (unsigned long)((long)code -
> + (long)orig->addr + 8) & 0xfe000003;
> +
> + if ((rel_chk != 0) && (rel_chk != 0xfe000000)) {
> + /*
> + * Different from x86, we free code buf directly instead of
> + * calling __arch_remove_optimized_kprobe() because
> + * we have not fill any field in op.
> + */
> + free_optinsn_slot(code, 0);
> + return -ERANGE;
> + }
> +
> + /* Copy arch-dep-instance from template. */
> + memcpy(code, &optprobe_template_entry,
> + TMPL_END_IDX * sizeof(kprobe_opcode_t));
> +
> + /* Adjust buffer according to instruction. */
> + BUG_ON(orig->ainsn.stack_space < 0);
> +
> + /*
> + * Add more 4 byte for potential AEABI requirement. If probing is triggered
> + * when SP % 8 == 4, we sub SP by another 4 bytes.
> + */
> + stack_protect += orig->ainsn.stack_space + 4;

The above comment and code don't match up any more with the code in
optprobe_template_entry, it should be '+ 7' here. Alternatively, change
the code in optprobe_template_entry back to use 4 as I suggested.


> +
> + /* Should have been filtered by can_optimize(). */
> + BUG_ON(stack_protect > 255);
> +
> + /* Create a 'sub sp, sp, #<stack_protect>' */
> + code[TMPL_SUB_SP] = __opcode_to_mem_arm(0xe24dd000 | stack_protect);
> + /* Create a 'add r3, sp, #<stack_protect>' */
> + code[TMPL_ADD_SP] = __opcode_to_mem_arm(0xe28d3000 | stack_protect);
> +
> + /* Set probe information */
> + val = (unsigned long)op;
> + code[TMPL_VAL_IDX] = val;
> +
> + /* Set probe function call */
> + val = (unsigned long)optimized_callback;
> + code[TMPL_CALL_IDX] = val;
> +
> + flush_icache_range((unsigned long)code,
> + (unsigned long)(&code[TMPL_END_IDX]));
> +
> + /*
> + * Set op->optinsn.insn means prepared.
> + * NOTE: what we saved here is potentially unaligned.
> + */
> + op->optinsn.insn = code;
> + return 0;
> +}
> +
> +void arch_optimize_kprobes(struct list_head *oplist)
> +{
> + struct optimized_kprobe *op, *tmp;
> +
> + list_for_each_entry_safe(op, tmp, oplist, list) {
> + unsigned long insn;
> + WARN_ON(kprobe_disabled(&op->kp));
> +
> + /*
> + * Backup instructions which will be replaced
> + * by jump address
> + */
> + memcpy(op->optinsn.copied_insn, op->kp.addr,
> + RELATIVEJUMP_SIZE);
> +
> + insn = arm_gen_branch((unsigned long)op->kp.addr,
> + (unsigned long)op->optinsn.insn);
> + BUG_ON(insn == 0);
> +
> + /*
> + * Make it a conditional branch if replaced insn
> + * is consitional
> + */
> + insn = (__mem_to_opcode_arm(
> + op->optinsn.copied_insn[0]) & 0xf0000000) |
> + (insn & 0x0fffffff);
> +
> + patch_text(op->kp.addr, insn);
> +
> + list_del_init(&op->list);
> + }
> +}
> +
> +void arch_unoptimize_kprobe(struct optimized_kprobe *op)
> +{
> + arch_arm_kprobe(&op->kp);
> +}
> +
> +/*
> + * Recover original instructions and breakpoints from relative jumps.
> + * Caller must call with locking kprobe_mutex.
> + */
> +void arch_unoptimize_kprobes(struct list_head *oplist,
> + struct list_head *done_list)
> +{
> + struct optimized_kprobe *op, *tmp;
> +
> + list_for_each_entry_safe(op, tmp, oplist, list) {
> + arch_unoptimize_kprobe(op);
> + list_move(&op->list, done_list);
> + }
> +}
> +
> +int arch_within_optimized_kprobe(struct optimized_kprobe *op,
> + unsigned long addr)
> +{
> + return ((unsigned long)op->kp.addr <= addr &&
> + (unsigned long)op->kp.addr + RELATIVEJUMP_SIZE > addr);
> +}
> +
> +void arch_remove_optimized_kprobe(struct optimized_kprobe *op)
> +{
> + __arch_remove_optimized_kprobe(op, 1);
> +}

--
Tixy

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/