[PATCH 5/5] rc: img-ir: add philips rc6 decoder module

From: Sifan Naeem
Date: Thu Dec 04 2014 - 10:39:35 EST


Add img-ir module for decoding Philips rc6 protocol.

Signed-off-by: Sifan Naeem <sifan.naeem@xxxxxxxxxx>
---
drivers/media/rc/img-ir/Kconfig | 8 +++
drivers/media/rc/img-ir/Makefile | 1 +
drivers/media/rc/img-ir/img-ir-hw.c | 3 +
drivers/media/rc/img-ir/img-ir-hw.h | 1 +
drivers/media/rc/img-ir/img-ir-rc6.c | 117 ++++++++++++++++++++++++++++++++++
5 files changed, 130 insertions(+)
create mode 100644 drivers/media/rc/img-ir/img-ir-rc6.c

diff --git a/drivers/media/rc/img-ir/Kconfig b/drivers/media/rc/img-ir/Kconfig
index b5b114f..4d3fca9 100644
--- a/drivers/media/rc/img-ir/Kconfig
+++ b/drivers/media/rc/img-ir/Kconfig
@@ -66,3 +66,11 @@ config IR_IMG_RC5
help
Say Y here to enable support for the RC5 protocol in the ImgTec
infrared decoder block.
+
+config IR_IMG_RC6
+ bool "Phillips RC6 protocol support"
+ depends on IR_IMG_HW
+ help
+ Say Y here to enable support for the RC6 protocol in the ImgTec
+ infrared decoder block.
+ Note: This version only supports mode 0.
diff --git a/drivers/media/rc/img-ir/Makefile b/drivers/media/rc/img-ir/Makefile
index 898b1b8..8e6d458 100644
--- a/drivers/media/rc/img-ir/Makefile
+++ b/drivers/media/rc/img-ir/Makefile
@@ -7,6 +7,7 @@ img-ir-$(CONFIG_IR_IMG_SONY) += img-ir-sony.o
img-ir-$(CONFIG_IR_IMG_SHARP) += img-ir-sharp.o
img-ir-$(CONFIG_IR_IMG_SANYO) += img-ir-sanyo.o
img-ir-$(CONFIG_IR_IMG_RC5) += img-ir-rc5.o
+img-ir-$(CONFIG_IR_IMG_RC6) += img-ir-rc6.o
img-ir-objs := $(img-ir-y)

obj-$(CONFIG_IR_IMG) += img-ir.o
diff --git a/drivers/media/rc/img-ir/img-ir-hw.c b/drivers/media/rc/img-ir/img-ir-hw.c
index 322cdf8..3b70dc2 100644
--- a/drivers/media/rc/img-ir/img-ir-hw.c
+++ b/drivers/media/rc/img-ir/img-ir-hw.c
@@ -45,6 +45,9 @@ static struct img_ir_decoder *img_ir_decoders[] = {
#ifdef CONFIG_IR_IMG_RC5
&img_ir_rc5,
#endif
+#ifdef CONFIG_IR_IMG_RC6
+ &img_ir_rc6,
+#endif
NULL
};

diff --git a/drivers/media/rc/img-ir/img-ir-hw.h b/drivers/media/rc/img-ir/img-ir-hw.h
index f124ec5..c7b6e1a 100644
--- a/drivers/media/rc/img-ir/img-ir-hw.h
+++ b/drivers/media/rc/img-ir/img-ir-hw.h
@@ -188,6 +188,7 @@ extern struct img_ir_decoder img_ir_sony;
extern struct img_ir_decoder img_ir_sharp;
extern struct img_ir_decoder img_ir_sanyo;
extern struct img_ir_decoder img_ir_rc5;
+extern struct img_ir_decoder img_ir_rc6;

/**
* struct img_ir_reg_timings - Reg values for decoder timings at clock rate.
diff --git a/drivers/media/rc/img-ir/img-ir-rc6.c b/drivers/media/rc/img-ir/img-ir-rc6.c
new file mode 100644
index 0000000..bcd0822
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-rc6.c
@@ -0,0 +1,117 @@
+/*
+ * ImgTec IR Decoder setup for Phillips RC-6 protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert RC6 data to a scancode */
+static int img_ir_rc6_scancode(int len, u64 raw, u64 enabled_protocols,
+ struct img_ir_scancode_req *request)
+{
+ unsigned int addr, cmd, mode, trl1, trl2;
+
+ /*
+ * Due to a side effect of the decoder handling the double length
+ * Trailer bit, the header information is a bit scrambled, and the
+ * raw data is shifted incorrectly.
+ * This workaround effectively recovers the header bits.
+ *
+ * The Header field should look like this:
+ *
+ * StartBit ModeBit2 ModeBit1 ModeBit0 TrailerBit
+ *
+ * But what we get is:
+ *
+ * ModeBit2 ModeBit1 ModeBit0 TrailerBit1 TrailerBit2
+ *
+ * The start bit is not important to recover the scancode.
+ */
+
+ raw >>= 27;
+
+ trl1 = (raw >> 17) & 0x01;
+ trl2 = (raw >> 16) & 0x01;
+
+ mode = (raw >> 18) & 0x07;
+ addr = (raw >> 8) & 0xff;
+ cmd = raw & 0xff;
+
+ /*
+ * Due to the above explained irregularity the trailer bits cannot
+ * have the same value.
+ */
+ if (trl1 == trl2)
+ return -EINVAL;
+
+ /* Only mode 0 supported for now */
+ if (mode)
+ return -EINVAL;
+
+ request->protocol = RC_TYPE_RC6_0;
+ request->scancode = addr << 8 | cmd;
+ request->toggle = trl2;
+ return IMG_IR_SCANCODE;
+}
+
+/* Convert RC6 scancode to RC6 data filter */
+static int img_ir_rc6_filter(const struct rc_scancode_filter *in,
+ struct img_ir_filter *out, u64 protocols)
+{
+ /* Not supported by the hw. */
+ return -EINVAL;
+}
+
+/*
+ * RC-6 decoder
+ * see http://www.sbprojects.com/knowledge/ir/rc6.php
+ */
+struct img_ir_decoder img_ir_rc6 = {
+ .type = RC_BIT_RC6_0,
+ .control = {
+ .bitorien = 1,
+ .code_type = IMG_IR_CODETYPE_BIPHASE,
+ .decoden = 1,
+ .decodinpol = 1,
+ },
+ /* main timings */
+ .tolerance = 20,
+ /*
+ * Due to a quirk in the img-ir decoder, default header values do
+ * not work, the values described below were extracted from
+ * successful RTL test cases.
+ */
+ .timings = {
+ /* leader symbol */
+ .ldr = {
+ .pulse = { 650 },
+ .space = { 660 },
+ },
+ /* 0 symbol */
+ .s00 = {
+ .pulse = { 370 },
+ .space = { 370 },
+ },
+ /* 01 symbol */
+ .s01 = {
+ .pulse = { 370 },
+ .space = { 370 },
+ },
+ /* free time */
+ .ft = {
+ .minlen = 21,
+ .maxlen = 21,
+ .ft_min = 2666, /* 2.666 ms */
+ },
+ },
+
+ /* scancode logic */
+ .scancode = img_ir_rc6_scancode,
+ .filter = img_ir_rc6_filter,
+};
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/