Re: [PATCH] SSB / B44: fix WOL for BCM4401

From: Larry Finger
Date: Tue Dec 02 2014 - 17:23:56 EST


On 12/02/2014 02:12 PM, Michael BÃsch wrote:
On Tue, 2 Dec 2014 23:01:29 +0300
Andrey Skvortsov <andrej.skvortzov@xxxxxxxxx> wrote:

On Mon, Dec 01, 2014 at 10:10:23PM +0100, Michael BÃsch wrote:
On Mon, 1 Dec 2014 23:46:38 +0300
Andrey Skvortsov <andrej.skvortzov@xxxxxxxxx> wrote:

Wake On Lan was not working on laptop DELL Vostro 1500.
If WOL was turned on, BCM4401 was powered up in suspend mode. LEDs blinked.
But the laptop could not be woken up with the Magic Packet. The reason for
that was that PCIE was not enabled as a system wakeup source and
therefore the host PCI bridge was not powered up in suspend mode.
PCIE was not enabled in suspend by PM because no child devices were
registered as wakeup source during suspend process.
On laptop BCM4401 is connected through the SSB bus, that is connected to the
PCI-Express bus. SSB and B44 did not use standard PM wakeup functions
and did not forward wakeup settings to their parents.
To fix that B44 driver enables PM wakeup and registers new wakeup source
using device_set_wakeup_enable(). Wakeup is automatically reported to the parent SSB
bus via power.wakeup_path. SSB bus enables wakeup for the parent PCI bridge, if there is any
child devices with enabled wakeup functionality. All other steps are
done by PM core code.

Thanks, this looks good.
I assume you tested this (I currently don't have a device to test this).

Sure, I've tested it. WOL from suspend is working and after resume from hibernate Ethernet is working too.

That sounds good, indeed.
I'd still prefer, if someone with b43 (wireless) would test it, too.

I did a partial test with my PowerBook G4. With the patch installed, it would both suspend and hibernate, but WOL would be impossible. This computer uses a PCMCIA version of the BCM4318, and power is turned off to the PCMCIA card when suspended or hibernating.

If WOL works for the OP, then I think we can ACK this patch.

Larry


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/