Re: [PATCH v8 1/4] irqchip: gic: Support hierarchy irq domain.

From: Geert Uytterhoeven
Date: Tue Dec 02 2014 - 08:28:05 EST


On Tue, Nov 25, 2014 at 9:04 AM, Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx> wrote:
> Add support to use gic as a parent for stacked irq domain.
>
> Signed-off-by: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>

This change (which is now in -next as commit 9a1091ef0017c40a) breaks
booting on r8a7740/armadillo-legacy.

It hangs because the timers cannot get their interrupts:

console [tty0] enabled
sh-tmu.0: ch0: used for clock events
sh-tmu.0: ch0: used for periodic clock events
sh-tmu.0: ch0: failed to request irq 230
sh-tmu.0: ch1: used as clock source
sh-cmt-48.1: ch0: failed to request irq 90
sh-cmt-48.1: ch0: registration failed
earlytimer: unable to probe sh-cmt-48 early.
Calibrating delay loop...

> ---
> drivers/irqchip/Kconfig | 1 +
> drivers/irqchip/irq-gic.c | 77 ++++++++++++++++++++++++++++++++---------------
> 2 files changed, 54 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index b21f12f..7f34138 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -5,6 +5,7 @@ config IRQCHIP
> config ARM_GIC
> bool
> select IRQ_DOMAIN
> + select IRQ_DOMAIN_HIERARCHY
> select MULTI_IRQ_HANDLER
>
> config GIC_NON_BANKED
> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
> index 38493ff..ab6069b 100644
> --- a/drivers/irqchip/irq-gic.c
> +++ b/drivers/irqchip/irq-gic.c
> @@ -788,17 +788,16 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
> {
> if (hw < 32) {
> irq_set_percpu_devid(irq);
> - irq_set_chip_and_handler(irq, &gic_chip,
> - handle_percpu_devid_irq);
> + irq_domain_set_info(d, irq, hw, &gic_chip, d->host_data,
> + handle_percpu_devid_irq, NULL, NULL);
> set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
> } else {
> - irq_set_chip_and_handler(irq, &gic_chip,
> - handle_fasteoi_irq);
> + irq_domain_set_info(d, irq, hw, &gic_chip, d->host_data,
> + handle_fasteoi_irq, NULL, NULL);
> set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
>
> gic_routable_irq_domain_ops->map(d, irq, hw);
> }
> - irq_set_chip_data(irq, d->host_data);
> return 0;
> }
>
> @@ -858,6 +857,31 @@ static struct notifier_block gic_cpu_notifier = {
> };
> #endif
>
> +static int gic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> + unsigned int nr_irqs, void *arg)
> +{
> + int i, ret;
> + irq_hw_number_t hwirq;
> + unsigned int type = IRQ_TYPE_NONE;
> + struct of_phandle_args *irq_data = arg;
> +
> + ret = gic_irq_domain_xlate(domain, irq_data->np, irq_data->args,
> + irq_data->args_count, &hwirq, &type);
> + if (ret)
> + return ret;
> +
> + for (i = 0; i < nr_irqs; i++)
> + gic_irq_domain_map(domain, virq + i, hwirq + i);
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops gic_irq_domain_hierarchy_ops = {
> + .xlate = gic_irq_domain_xlate,
> + .alloc = gic_irq_domain_alloc,
> + .free = irq_domain_free_irqs_top,
> +};
> +
> static const struct irq_domain_ops gic_irq_domain_ops = {
> .map = gic_irq_domain_map,
> .unmap = gic_irq_domain_unmap,
> @@ -948,18 +972,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
> gic_cpu_map[i] = 0xff;
>
> /*
> - * For primary GICs, skip over SGIs.
> - * For secondary GICs, skip over PPIs, too.
> - */
> - if (gic_nr == 0 && (irq_start & 31) > 0) {
> - hwirq_base = 16;
> - if (irq_start != -1)
> - irq_start = (irq_start & ~31) + 16;
> - } else {
> - hwirq_base = 32;
> - }
> -
> - /*
> * Find out how many interrupts are supported.
> * The GIC only supports up to 1020 interrupt sources.
> */
> @@ -969,10 +981,31 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
> gic_irqs = 1020;
> gic->gic_irqs = gic_irqs;
>
> - gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
> + if (node) { /* DT case */
> + const struct irq_domain_ops *ops = &gic_irq_domain_hierarchy_ops;
> +
> + if (!of_property_read_u32(node, "arm,routable-irqs",
> + &nr_routable_irqs)) {
> + ops = &gic_irq_domain_ops;
> + gic_irqs = nr_routable_irqs;
> + }
> +
> + gic->domain = irq_domain_add_linear(node, gic_irqs, ops, gic);
> + } else { /* Non-DT case */
> + /*
> + * For primary GICs, skip over SGIs.
> + * For secondary GICs, skip over PPIs, too.
> + */
> + if (gic_nr == 0 && (irq_start & 31) > 0) {
> + hwirq_base = 16;
> + if (irq_start != -1)
> + irq_start = (irq_start & ~31) + 16;
> + } else {
> + hwirq_base = 32;
> + }
> +
> + gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
>
> - if (of_property_read_u32(node, "arm,routable-irqs",
> - &nr_routable_irqs)) {
> irq_base = irq_alloc_descs(irq_start, 16, gic_irqs,
> numa_node_id());
> if (IS_ERR_VALUE(irq_base)) {
> @@ -983,10 +1016,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
>
> gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
> hwirq_base, &gic_irq_domain_ops, gic);
> - } else {
> - gic->domain = irq_domain_add_linear(node, nr_routable_irqs,
> - &gic_irq_domain_ops,
> - gic);
> }
>
> if (WARN_ON(!gic->domain))
> --
> 1.8.1.1.dirty

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/