Re: [PATCH v3] hv: hv_fcopy: drop the obsolete message on transfer failure

From: Vitaly Kuznetsov
Date: Mon Dec 01 2014 - 04:55:32 EST


Dexuan Cui <decui@xxxxxxxxxxxxx> writes:

>> -----Original Message-----
>> From: Jason Wang [mailto:jasowang@xxxxxxxxxx]
>> Sent: Monday, December 1, 2014 16:23 PM
>> To: Dexuan Cui
>> Cc: gregkh@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; driverdev-
>> devel@xxxxxxxxxxxxxxxxxxxxxx; olaf@xxxxxxxxx; apw@xxxxxxxxxxxxx; KY
>> Srinivasan; vkuznets@xxxxxxxxxx; Haiyang Zhang
>> Subject: RE: [PATCH v3] hv: hv_fcopy: drop the obsolete message on transfer
>> failure
>> On Fri, Nov 28, 2014 at 7:54 PM, Dexuan Cui <decui@xxxxxxxxxxxxx> wrote:
>> >> -----Original Message-----
>> >> From: Jason Wang [mailto:jasowang@xxxxxxxxxx]
>> >> Sent: Friday, November 28, 2014 18:13 PM
>> >> To: Dexuan Cui
>> >> Cc: gregkh@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
>> >> driverdev-
>> >> devel@xxxxxxxxxxxxxxxxxxxxxx; olaf@xxxxxxxxx; apw@xxxxxxxxxxxxx; KY
>> >> Srinivasan; vkuznets@xxxxxxxxxx; Haiyang Zhang
>> >> Subject: RE: [PATCH v3] hv: hv_fcopy: drop the obsolete message on
>> >> transfer
>> >> failure
>> >> On Fri, Nov 28, 2014 at 4:36 PM, Dexuan Cui <decui@xxxxxxxxxxxxx>
>> >> wrote:
>> >> >> -----Original Message-----
>> >> >> From: Jason Wang [mailto:jasowang@xxxxxxxxxx]
>> >> >> Sent: Friday, November 28, 2014 14:47 PM
>> >> >> To: Dexuan Cui
>> >> >> Cc: gregkh@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
>> >> >> driverdev-
>> >> >> devel@xxxxxxxxxxxxxxxxxxxxxx; olaf@xxxxxxxxx;
>> >> apw@xxxxxxxxxxxxx; KY
>> >> >> Srinivasan; vkuznets@xxxxxxxxxx; Haiyang Zhang
>> >> >> Subject: Re: [PATCH v3] hv: hv_fcopy: drop the obsolete message
>> >> on
>> >> >> transfer
>> >> >> failure
>> >> >> On Thu, Nov 27, 2014 at 9:09 PM, Dexuan Cui
>> >> <decui@xxxxxxxxxxxxx>
>> >> >> wrote:
>> >> >> > In the case the user-space daemon crashes, hangs or is
>> >> killed, we
>> >> >> > need to down the semaphore, otherwise, after the daemon starts
>> >> >> next
>> >> >> > time, the obsolete data in fcopy_transaction.message or
>> >> >> > fcopy_transaction.fcopy_msg will be used immediately.
>> >> >> >
>> >> >> > Cc: Jason Wang <jasowang@xxxxxxxxxx>
>> >> >> > Cc: Vitaly Kuznetsov <vkuznets@xxxxxxxxxx>
>> >> >> > Cc: K. Y. Srinivasan <kys@xxxxxxxxxxxxx>
>> >> >> > Signed-off-by: Dexuan Cui <decui@xxxxxxxxxxxxx>
>> >> >> > ---
>> >> >> >
>> >> >> > v2: I removed the "FCP" prefix as Greg asked.
>> >> >> >
>> >> >> > I also updated the output message a little:
>> >> >> > "FCP: failed to acquire the semaphore" -->
>> >> >> > "can not acquire the semaphore: it is benign"
>> >> >> >
>> >> >> > v3: I added the code in fcopy_release() as Jason Wang
>> >> suggested.
>> >> >> > I removed the pr_debug (it isn't so meaningful)and added a
>> >> >> > comment instead.
>> >> >> >
>> >> >> > drivers/hv/hv_fcopy.c | 19 +++++++++++++++++++
>> >> >> > 1 file changed, 19 insertions(+)
>> >> >> >
>> >> >> > diff --git a/drivers/hv/hv_fcopy.c b/drivers/hv/hv_fcopy.c
>> >> >> > index 23b2ce2..faa6ba6 100644
>> >> >> > --- a/drivers/hv/hv_fcopy.c
>> >> >> > +++ b/drivers/hv/hv_fcopy.c
>> >> >> > @@ -86,6 +86,18 @@ static void fcopy_work_func(struct
>> >> work_struct
>> >> >> > *dummy)
>> >> >> > * process the pending transaction.
>> >> >> > */
>> >> >> > fcopy_respond_to_host(HV_E_FAIL);
>> >> >> > +
>> >> >> > + /* In the case the user-space daemon crashes, hangs or is
>> >> >> killed, we
>> >> >> > + * need to down the semaphore, otherwise, after the daemon
>> >> >> starts
>> >> >> > next
>> >> >> > + * time, the obsolete data in fcopy_transaction.message or
>> >> >> > + * fcopy_transaction.fcopy_msg will be used immediately.
>> >> >> > + *
>> >> >> > + * NOTE: fcopy_read() happens to get the semaphore (very
>> >> rare)?
>> >> >> > We're
>> >> >> > + * still OK, because we've reported the failure to the host.
>> >> >> > + */
>> >> >> > + if (down_trylock(&fcopy_transaction.read_sema))
>> >> >> > + ;
>> >> >>
>> >> >> Sorry, I'm not quite understand how if () ; can help here.
>> >> >>
>> >> >> Btw, a question not relate to this patch.
>> >> >>
>> >> >> What happens if a daemon is resume from SIGSTOP and expires the
>> >> >> check
>> >> >> here?
>> >> > Hi Jason,
>> >> > My idea is: here we need down_trylock(), but in case we can't get
>> >> the
>> >> > semaphore, it's OK anyway:
>> >> >
>> >> > Scenario 1):
>> >> > 1.1: when the daemon is blocked on the pread(), the daemon
>> >> receives
>> >> > SIGSTOP;
>> >> > 1.2: the host user runs the PowerShell Copy-VMFile command;
>> >> > 1.3.1: the driver reports the failure to the host user in 5s and
>> >> > 1.3.2: the driver down()-es the semaphore;
>> >> > 1.4: the daemon receives SIGCONT and it will be still blocked on
>> >> the
>> >> > pread().
>> >> > Without the down_trylock(), in 1.4, the daemon can receive an
>> >> > obsolete message.
>> >> > NOTE: in this scenario, the daemon is not killed.
>> >> >
>> >> > Scenario 2):
>> >> > In senario 1), if the daemon receives SIGCONT between 1.3.1 and
>> >> 1.3.2
>> >> > and
>> >> > do down() in fcopy_read(), it will receive the message but: the
>> >> > driver has
>> >> > reported the failure to the host user and the driver's 1.3.2 can't
>> >> > get the
>> >> > semaphore -- IMO this is acceptably OK, though in the VM, an
>> >> > incomplete
>> >> > file will be left there.
>> >> > BTW, I think in the daemon's hv_start_fcopy() we should add a
>> >> > close(target_fd) before open()-ing a new one.
>> >>
>> >> Right, but how about the case when resuming from SIGSTOP but no
>> >> timeout?
>> > Sorry, I don't understand this:
>> > if no timeout, fcopy_read() will get the semaphore and fcopy_write()
>> > will try to cancel fcopy_work.
>>
>> Yes.
>> >
>> >
>> >> Looks like in this case userspace() may wait in down_interruptible()
>> >> until timeout. We probably need something like this:
>> >>
>> >> if (down_interruptible(&fcopy_transaction.read_sema)) {
>> >> up(&fcopy_transaction.read_sema);
>> >> return -EINTR;
>> >> }
>> > until "timeout"?
>> > if the daemon can't get the semaphore, it can only be wake by a
>> > signal(the
>> > daemon doesn't install handler, so by default most signals will kill
>> > the daemon).
>> > In case a signal waking up the daemon doesn't kill the daemon, why
>> > should
>> > we do up()?
>>
>> True, no need since we do down_trylock() in release().
>>
>> Btw, there's no EINTR handling in handling pread() return value,
>> may add such one which should be useful for something like debugging.
>>
>> >
>> >
>> >>
>> >> This should synchronize with the timeout work for sure.
>> >> But how about only schedule it after this?
>> >> It does not may sense to start the timer during interrupt
>> >> since the file may not even opened and it may take time
>> >> to handle signals?
>> >>
>> >> >
>> >> >> >
>> >> >> > +
>> >> >> > }
>> >> >> >
>> >> >> > static int fcopy_handle_handshake(u32 version)
>> >> >> > @@ -351,6 +363,13 @@ static int fcopy_release(struct inode
>> >> *inode,
>> >> >> > struct file *f)
>> >> >> > */
>> >> >> > in_hand_shake = true;
>> >> >> > opened = false;
>> >> >> > +
>> >> >> > + if (cancel_delayed_work_sync(&fcopy_work)) {
>> >> >> > + /* We haven't up()-ed the semaphore(very rare)? */
>> >> >> > + if (down_trylock(&fcopy_transaction.read_sema))
>> >> >> > + ;
>> >> >>
>> >> >> And this.
>> >> >
>> >> > Scenario 3):
>> >> > When the daemon exits(e.g., SIGKILL received), if there is a
>> >> > fcopy_work
>> >> > pending (scheduled but not start to run yet), we should cancel the
>> >> > work (as you suggested) and down() the semaphore, otherwise, the
>> >> > obsolete message will be received by the next instance of the
>> >> daemon.
>> >>
>> >> Yes
>> >> >
>> >> >
>> >> > Scenario 4): in the driver's hv_fcopy_onchannelcallback():
>> >> > schedule_delayed_work(&fcopy_work, 5*HZ);
>> >> > ----> if fcopy_release() is running on another vcpu, just
>> >> > before the next line?
>> >> > fcopy_send_data();
>> >> >
>> >> > In this case, fcopy_release() can cancel fcopy_work, but
>> >> > can't get the semaphore since it hasn't been up()-ed.
>> >> > Hmm, in this case, fcopy_send_data() will do up() later, and
>> >> we'll
>> >> > buffer an obsolete message in the driver, and the message will be
>> >> > fetched by the next instance of the daemon...
>> >> >
>> >> > Looks we need a spinlock here?
>> >>
>> >> Unless fcopy_release() can wait for all data for current transation
>> >> to be received. Spinlock won't help.
>> >>
>> >> But an idea is let the daemon the handle such cases. E.g make sure
>> >> the
>> >> processing begins with START_COPY and end with
>> COMPLETE/CANCEL_COPY.
>> >> Drop all requests that does not start with START_COPY.
>> >>
>> >> Thought?
>> > Good idea.
>> > I also think we should reinforce the concept of state machine in the
>> > daemon code.
>>
>> Yes, it needs.
> I agree.
> Obviously we can do something to make the daemon/driver work better
> in the corner cases.
>
>> >
>> > The daemon/driver communication has so many corner cases...
>>
>> Looks so, let's first address the issue mentioned in this patch.
> OK.
>
>> I don't have any more comments other than changing
>>
>> if(down_trylock(&fcopy_transaction.read_sema))
>> ;
>>
>> to
>>
>> down_trylock(&fcopy_transaction.read_sema);
> Hi Jason,
> This is to address Vitaly's comment in the bugzilla:
> https://bugzilla.redhat.com/show_bug.cgi?id=1162100#c5
>
> down_trylock(&fcopy_transaction.read_sema) will
>
> "
> produces the following compile warning:
> drivers/hv/hv_fcopy.c: In function âfcopy_work_funcâ:
> drivers/hv/hv_fcopy.c:95:2: warning: ignoring return value of âdown_trylockâ, declared with attribute warn_unused_result [-Wunused-result]
> (void)down_trylock(&fcopy_transaction.read_sema);
> "
>
> Actually I personally don't care about the warning, because we only
> see it when we run some kind of code checker program. :-)
>
> I can change my v3 to the "normal" style you prefer, if
> there is no strong objection from Vitaly?

Well, I still prefer pr_debug() there: these are being compiled out on
non-debug builds. I'm not objecting to any solution here though, really
a minor issue.

>
> Thanks,
> -- Dexuan

--
Vitaly
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/