[PATCHv3 3/4] ARM: OMAP2: RX-51: update si4713 platform data

From: Sebastian Reichel
Date: Mon Nov 10 2014 - 15:35:45 EST


This updates platform data related to Si4713, which
has been updated to be compatible with DT interface.

Signed-off-by: Sebastian Reichel <sre@xxxxxxxxxx>
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 69 +++++++++++++---------------
1 file changed, 31 insertions(+), 38 deletions(-)

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ddfc8df..ec2e410 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -23,6 +23,7 @@
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
+#include <linux/gpio/machine.h>
#include <linux/mmc/host.h>
#include <linux/power/isp1704_charger.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
@@ -38,7 +39,6 @@

#include <sound/tlv320aic3x.h>
#include <sound/tpa6130a2-plat.h>
-#include <media/radio-si4713.h>
#include <media/si4713.h>
#include <linux/platform_data/leds-lp55xx.h>

@@ -760,46 +760,17 @@ static struct regulator_init_data rx51_vintdig = {
},
};

-static const char * const si4713_supply_names[] = {
- "vio",
- "vdd",
-};
-
-static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
- .supplies = ARRAY_SIZE(si4713_supply_names),
- .supply_names = si4713_supply_names,
- .gpio_reset = RX51_FMTX_RESET_GPIO,
-};
-
-static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = {
- I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH),
- .platform_data = &rx51_si4713_i2c_data,
-};
-
-static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = {
- .i2c_bus = 2,
- .subdev_board_info = &rx51_si4713_board_info,
-};
-
-static struct platform_device rx51_si4713_dev __initdata_or_module = {
- .name = "radio-si4713",
- .id = -1,
- .dev = {
- .platform_data = &rx51_si4713_data,
+static struct gpiod_lookup_table rx51_fmtx_gpios_table = {
+ .dev_id = "2-0063",
+ .table = {
+ GPIO_LOOKUP("gpio.6", 3, "reset", GPIO_ACTIVE_HIGH), /* 163 */
+ { },
},
};

-static __init void rx51_init_si4713(void)
+static __init void rx51_gpio_init(void)
{
- int err;
-
- err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
- if (err) {
- printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
- return;
- }
- rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ);
- platform_device_register(&rx51_si4713_dev);
+ gpiod_add_lookup_table(&rx51_fmtx_gpios_table);
}

static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
@@ -1029,7 +1000,17 @@ static struct aic3x_pdata rx51_aic3x_data2 = {
.gpio_reset = 60,
};

+static struct si4713_platform_data rx51_si4713_platform_data = {
+ .is_platform_device = true
+};
+
static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
+#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
+ {
+ I2C_BOARD_INFO("si4713", 0x63),
+ .platform_data = &rx51_si4713_platform_data,
+ },
+#endif
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
.platform_data = &rx51_aic3x_data,
@@ -1070,6 +1051,10 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {

static int __init rx51_i2c_init(void)
{
+#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
+ int err;
+#endif
+
if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
system_rev >= SYSTEM_REV_B_USES_VAUX3) {
rx51_twldata.vaux3 = &rx51_vaux3_mmc;
@@ -1087,6 +1072,14 @@ static int __init rx51_i2c_init(void)
rx51_twldata.vdac->constraints.name = "VDAC";

omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
+#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
+ err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
+ if (err) {
+ printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
+ return err;
+ }
+ rx51_peripherals_i2c_board_info_2[0].irq = gpio_to_irq(RX51_FMTX_IRQ);
+#endif
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
@@ -1300,6 +1293,7 @@ static void __init rx51_init_omap3_rom_rng(void)

void __init rx51_peripherals_init(void)
{
+ rx51_gpio_init();
rx51_i2c_init();
regulator_has_full_constraints();
gpmc_onenand_init(board_onenand_data);
@@ -1307,7 +1301,6 @@ void __init rx51_peripherals_init(void)
rx51_add_gpio_keys();
rx51_init_wl1251();
rx51_init_tsc2005();
- rx51_init_si4713();
rx51_init_lirc();
spi_register_board_info(rx51_peripherals_spi_board_info,
ARRAY_SIZE(rx51_peripherals_spi_board_info));
--
2.1.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/