Re: [RFC 1/2] PM / Domains: Power on domain early during system resume

From: Grygorii Strashko
Date: Thu Oct 23 2014 - 12:22:28 EST


Hi Krzysztof,

On 10/23/2014 04:48 PM, Krzysztof Kozlowski wrote:
> When resuming the system the power domain has to be powered on early so
> any runtime PM aware devices could resume.
>
> This fixes following scenario reproduced on Exynos DRM:
> 1. Power domain is off before suspending the system.
> 2. System is suspended to RAM.
> 3. Resuming starts. The Exynos DRM driver resume callback is called.
> 4. The Exynos DRM driver calls drm_helper_resume_force_mode which turns
> the screen on by calling exynos_dsi_dpms with DRM_MODE_DPMS_ON.
> 5. The Exynos DSI driver calls pm_runtime_get. The driver runtime
> resumes and this should turn LCD power domain on.
> 6. Unfortunately the domain cannot be turned on because system resume is
> in progress and genpd->prepared_count is positive.

Just interesting, what value will be returned by pm_runtime_enabled()
from any of your .resume() callback (for any device which belongs to
some Generic PM domain)?

I'm asking, because as I can see Runtime PM can be disabled from pm_genpd_prepare().

Thank you.

Oh. I've just found that you might get this issue if you will try to do
suspend when PM domain is ON ;)

Any way, In my opinion, It might be better to fix pm_genpd_prepare() so
it will not increment prepared_count when initial state of the GPD is
GPD_STATE_POWER_OFF. Seems it's needed only in opposite case -
when state of GPD has to be restored from pm_genpd_resume_noirq().

>
> Steps to reproduce:
> 1. Add runtime PM to Exynos DSI driver.
> 2. Build Exynos DRM/FB without FRAMEBUFFER_CONSOLE.
> 3. Enable the connector and screen (e.g. with modeset-vsync application).
> 4. echo 3 > /sys/devices/platform/exynos-drm/graphics/fb0/blank
> 5. echo mem > /sys/power/state
> 6. Resume.
> [ 77.712469] PM: early resume of devices complete after 3.854 msecs
> [ 77.712739] exynos-dsi 11c80000.dsi: pm_genpd_resume()
> [ 77.712758] exynos4-fimc 11800000.fimc: pm_genpd_resume()
> [ 77.712774] exynos4-fimc 11810000.fimc: pm_genpd_resume()
> [ 77.712787] exynos-drm-fimc 11820000.fimc: pm_genpd_resume()
> [ 77.712802] exynos-drm-fimc 11830000.fimc: pm_genpd_resume()
> [ 77.712815] s5p-mipi-csis 11880000.csis: pm_genpd_resume()
> [ 77.712829] s5p-mipi-csis 11890000.csis: pm_genpd_resume()
> [ 77.712843] exynos-fimc-lite 12390000.fimc-lite: pm_genpd_resume()
> [ 77.712856] exynos-fimc-lite 123a0000.fimc-lite: pm_genpd_resume()
> [ 77.713788] exynos4-fb 11c00000.fimd: pm_genpd_resume()
> [ 77.713912] wake disabled for irq 184
> [ 77.713923] wake disabled for irq 185
> [ 77.714082] wake disabled for irq 173
> [ 77.715676] wake disabled for irq 176
> [ 77.718540] exynos4-fb 11c00000.fimd: pm_genpd_runtime_resume()
> [ 77.718567] exynos4-fb 11c00000.fimd: state restore latency exceeded, new value 1708 ns
> [ 77.718636] exynos-dsi 11c80000.dsi: pm_genpd_runtime_resume()
> [ 77.892366] exynos-dsi 11c80000.dsi: PLL failed to stabilize
> [ 77.892377] exynos-dsi 11c80000.dsi: failed to configure DSI PLL
> [ 78.192168] exynos-dsi 11c80000.dsi: timeout waiting for reset
> [ 78.211578] exynos-dsi 11c80000.dsi: waiting for bus lanes timed out
> [ 78.307173] exynos-dsi 11c80000.dsi: xfer timed out: d1 00 (null)
> [ 78.307190] panel_s6e8aa0 11c80000.dsi.0: error -110 reading dcs seq(0xd1)
> [ 78.307199] panel_s6e8aa0 11c80000.dsi.0: read id failed
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> ---
> drivers/base/power/domain.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
> index 40bc2f4072cc..4fdfe404a04c 100644
> --- a/drivers/base/power/domain.c
> +++ b/drivers/base/power/domain.c
> @@ -179,8 +179,7 @@ static int __pm_genpd_poweron(struct generic_pm_domain *genpd)
> }
> finish_wait(&genpd->status_wait_queue, &wait);
>
> - if (genpd->status == GPD_STATE_ACTIVE
> - || (genpd->prepared_count > 0 && genpd->suspend_power_off))
> + if (genpd->status == GPD_STATE_ACTIVE)
> return 0;
>
> if (genpd->status != GPD_STATE_POWER_OFF) {
>

regards,
-grygorii
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/