[PATCH v3 1/4] regulator: max77686: Replace hard-coded opmode values with defines

From: Krzysztof Kozlowski
Date: Tue Oct 21 2014 - 09:21:17 EST


Add defines for regulator operating modes which should be more readable,
especially if one does not have Maxim 77686 datasheet.

The patch does not introduce any functional change.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Suggested-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
---
drivers/regulator/max77686.c | 34 +++++++++++++++++++++++++++-------
1 file changed, 27 insertions(+), 7 deletions(-)

diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index ef1af2debbd2..3d0922051488 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -45,6 +45,25 @@
#define MAX77686_DVS_MINUV 600000
#define MAX77686_DVS_UVSTEP 12500

+/* Values used for configuring Buck[1234] */
+#define MAX77686_BUCK_OFF_PWRREQ 0x1
+#define MAX77686_BUCK_LOWPOWER 0x2
+#define MAX77686_BUCK_NORMAL 0x3
+
+/*
+ * Values used for configuring LDOn:
+ * - LDO1, 3-5, 9, 13, 17-26: forcing low power mode
+ */
+#define MAX77686_LDO_LOWPOWER 0x1
+/*
+ * In the same time for LDOn:
+ * - LDO2, 6-8, 10-12, 14-16: on/off controlled by PWRREQ
+ */
+#define MAX77686_LDO_OFF_PWRREQ 0x1
+/* Low power mode controlled by PWRREQ */
+#define MAX77686_LDO_LOWPOWER_PWRREQ 0x2
+#define MAX77686_LDO_NORMAL 0x3
+
#define MAX77686_OPMODE_SHIFT 6
#define MAX77686_OPMODE_BUCK234_SHIFT 4
#define MAX77686_OPMODE_MASK 0x3
@@ -76,9 +95,10 @@ static int max77686_buck_set_suspend_disable(struct regulator_dev *rdev)
int ret, id = rdev_get_id(rdev);

if (id == MAX77686_BUCK1)
- val = 0x1;
+ val = MAX77686_BUCK_OFF_PWRREQ;
else
- val = 0x1 << MAX77686_OPMODE_BUCK234_SHIFT;
+ val = MAX77686_BUCK_OFF_PWRREQ
+ << MAX77686_OPMODE_BUCK234_SHIFT;

ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, val);
@@ -103,10 +123,10 @@ static int max77686_set_suspend_mode(struct regulator_dev *rdev,

switch (mode) {
case REGULATOR_MODE_IDLE: /* ON in LP Mode */
- val = 0x2 << MAX77686_OPMODE_SHIFT;
+ val = MAX77686_LDO_LOWPOWER_PWRREQ << MAX77686_OPMODE_SHIFT;
break;
case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
- val = 0x3 << MAX77686_OPMODE_SHIFT;
+ val = MAX77686_LDO_NORMAL << MAX77686_OPMODE_SHIFT;
break;
default:
pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
@@ -133,13 +153,13 @@ static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev,

switch (mode) {
case REGULATOR_MODE_STANDBY: /* switch off */
- val = 0x1 << MAX77686_OPMODE_SHIFT;
+ val = MAX77686_LDO_OFF_PWRREQ << MAX77686_OPMODE_SHIFT;
break;
case REGULATOR_MODE_IDLE: /* ON in LP Mode */
- val = 0x2 << MAX77686_OPMODE_SHIFT;
+ val = MAX77686_LDO_LOWPOWER_PWRREQ << MAX77686_OPMODE_SHIFT;
break;
case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
- val = 0x3 << MAX77686_OPMODE_SHIFT;
+ val = MAX77686_LDO_NORMAL << MAX77686_OPMODE_SHIFT;
break;
default:
pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/