[PATCH] i2c: mpc: Report correct I2C error codes on Freescale MPC i2c bus driver

From: Danielle Costantino
Date: Tue Oct 21 2014 - 03:05:49 EST


From: Danielle Costantino <danielle.costantino@xxxxxxxxx>

This patch enforces correct I2C error returned codes from Freescale's
MPC i2c bus driver, allowing for proper user-space/kernel error
handling.

Signed-off-by: Danielle Costantino <danielle.costantino@xxxxxxxxx>
---
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 0edf630..66bef28 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -124,7 +124,7 @@
static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
{
unsigned long orig_jiffies = jiffies;
- u32 x;
+ u32 cmd_err;
int result = 0;

if (!i2c->irq) {
@@ -137,7 +137,7 @@
break;
}
}
- x = readb(i2c->base + MPC_I2C_SR);
+ cmd_err = readb(i2c->base + MPC_I2C_SR);
writeb(0, i2c->base + MPC_I2C_SR);
} else {
/* Interrupt mode */
@@ -150,30 +150,30 @@
result = -ETIMEDOUT;
}

- x = i2c->interrupt;
+ cmd_err = i2c->interrupt;
i2c->interrupt = 0;
}

- if (result < 0)
- return result;
+ if (result < 0)
+ return result;

- if (!(x & CSR_MCF)) {
- dev_dbg(i2c->dev, "unfinished\n");
- return -EIO;
- }
+ if (!(cmd_err & CSR_MCF)) {
+ dev_dbg(i2c->dev, "unfinished\n");
+ return -EIO;
+ }

- if (x & CSR_MAL) {
- dev_dbg(i2c->dev, "MAL\n");
- return -EIO;
- }
+ if (cmd_err & CSR_MAL) {
+ dev_dbg(i2c->dev, "MAL\n");
+ return -EAGAIN;
+ }

- if (writing && (x & CSR_RXAK)) {
- dev_dbg(i2c->dev, "No RXAK\n");
- /* generate stop */
- writeccr(i2c, CCR_MEN);
- return -EIO;
- }
- return 0;
+ if (writing && (cmd_err & CSR_RXAK)) {
+ dev_dbg(i2c->dev, "No RXAK\n");
+ /* generate stop */
+ writeccr(i2c, CCR_MEN);
+ return -ENXIO;
+ }
+ return 0;
}

#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)

--
- Danielle Costantino
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/