Re: [PATCH] pinctrl: st: Fix Sparse error

[Srinivas Kandagatla]

On 29/09/14 16:05, Pramod Gurav wrote:
> > >I think the correct fix is:
> > >
> > >diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c
> > >index 5475374..4060c30 100644
> > >--- a/drivers/pinctrl/pinctrl-st.c
> > >+++ b/drivers/pinctrl/pinctrl-st.c
> > >@@ -1512,7 +1512,7 @@ static int st_gpiolib_register_bank(struct st_pinctrl
> > >*info,
> > >                                              gpio_irq, st_gpio_irq_handler);
> > >         }
> > >
> > >-       if (info->irqmux_base > 0 || gpio_irq > 0) {
> > >+       if (!IS_ERR(info->irqmux_base) || gpio_irq > 0) {
> > >                 err = gpiochip_irqchip_add(&bank->gpio_chip,
> But if I am not wrong in function st_pctl_probe_dt, This is already done:
>
> if (IS_ERR(info->irqmux_base))
>              return PTR_ERR(info->irqmux_base);
>
> That is the reason I thought there is no need to recheck the pointer
> info->irqmux_base.
> Am I misunderstanding something?

Ok, we want to add the irqchip only when there is a valid irqmux_base or 
a valid gpio_irq per bank.

As st_gpiolib_register_bank() is used by both types of irq wirings and 
it does not know if irqmux or gpio irq is in use, so we need this 
explicit check. Also we want to make sure that atleast one type is valid 
before adding irqchip.

If you just check for only gpio_irq in this code, you would miss the 
case where irqmux is used.

As Dan pointed you could check if irqmux_base is valid and not remove it 
totally. Removing it will *break* the irqmux support as I explained.

thanks,
srini



> > >&st_gpio_irqchip,
> > >                                            0, handle_simple_irq,
> > >                                            IRQ_TYPE_LEVEL_LOW);
> > >
> > >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/