Re: [PATCH v3 04/13] PM / Domains: Add DT bindings for the R-Mobile System Controller

From: Ulf Hansson
Date: Fri Sep 26 2014 - 04:32:52 EST


On 25 September 2014 18:28, Geert Uytterhoeven <geert+renesas@xxxxxxxxx> wrote:
> The Renesas R-Mobile System Controller provides a.o. power management
> support, following the generic PM domain bindings in
> Documentation/devicetree/bindings/power/power_domain.txt.
>
> For now this supports the R-Mobile A1 (r8a7740) only, but it should be
> sufficiently generic to handle other members of the SH-Mobile/R-Mobile
> family in the future.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> v3:
> - Reword,
> v2:
> - Fix copy-and-paste s/#address-cells/#size-cells/,
> - Add optional PM QoS device latencies.
>
> .../bindings/power/renesas,sysc-rmobile.txt | 111 +++++++++++++++++++++
> 1 file changed, 111 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt
>
> diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt
> new file mode 100644
> index 0000000000000000..0b1e56d6ed1ab9a2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt
> @@ -0,0 +1,111 @@
> +DT bindings for the Renesas R-Mobile System Controller
> +
> +== System Controller Node ==
> +
> +The R-Mobile System Controller provides the following functions:
> + - Boot mode management,
> + - Reset generation,
> + - Power management.
> +
> +Required properties:
> +- compatible: Should be "renesas,sysc-<soctype>", "renesas,sysc-rmobile" as
> + fallback.
> + Examples with soctypes are:
> + - "renesas,sysc-r8a7740" (R-Mobile A1)
> +- reg: Two address start and address range blocks for the device:
> + - The first block refers to the normally accessible registers,
> + - the second block refers to the registers protected by the HPB
> + semaphore.
> +
> +Optional nodes:
> +- pm-domains: This node contains a hierarchy of PM domain nodes, which should
> + match the Power Area Hierarchy in the Power Domain Specifications section of
> + the device's datasheet.
> +
> +
> +== PM Domain Nodes ==
> +
> +Each of the PM domain nodes represents a PM domain, as documented by the
> +generic PM domain bindings in
> +Documentation/devicetree/bindings/power/power_domain.txt.
> +
> +The nodes should be named by the real power area names, and thus their names
> +should be unique.
> +
> +Required properties:
> + - #power-domain-cells: Must be 0.
> +
> +Optional properties:
> +- reg: If the PM domain is not always-on, this property must contain the bit
> + index number for the corresponding power area in the various Power
> + Control and Status Registers. The parent's node must contain the
> + following two properties:
> + - #address-cells: Must be 1,
> + - #size-cells: Must be 0.
> + If the PM domain is always-on, this property must be omitted.
> +- power-on-latency: Power-on latency of the PM domain, in ns,
> +- power-off-latency: Power-off latency of the PM domain, in ns.
> +
> +
> +Example:
> +
> +This shows a subset of the r8a7740 PM domain hierarchy, containing the
> +C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP domain,
> +which is a subdomain of A4S.
> +
> + sysc: system-controller@e6180000 {
> + compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
> + reg = <0xe6180000 8000>, <0xe6188000 8000>;
> +
> + pm-domains {
> + pd_c5: c5 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #power-domain-cells = <0>;
> +
> + pd_a4s: a4s@10 {
> + reg = <10>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #power-domain-cells = <0>;
> + power-on-latency = <250000>;
> + power-off-latency = <250000>;
> +
> + pd_a3sp: a3sp@11 {
> + reg = <11>;
> + #power-domain-cells = <0>;
> + power-on-latency = <250000>;
> + power-off-latency = <250000>;
> + };
> + };
> +
> + pd_a4su: a4su@20 {
> + reg = <20>;
> + #power-domain-cells = <0>;
> + power-on-latency = <250000>;
> + power-off-latency = <250000>;
> + };
> + };
> + };
> + };
> +
> +
> +== PM Domain Consumers ==
> +
> +Hardware blocks belonging to a PM domain should contain a "power-domains"
> +property that is a phandle pointing to the corresponding PM domain node,
> +and optional PM QoS device latencies:
> +
> +Example:
> +
> + tpu: pwm@e6600000 {
> + compatible = "renesas,tpu-r8a7740", "renesas,tpu";
> + reg = <0xe6600000 0x100>;
> + clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
> + power-domains = <&pd_a3sp>;
> + stop-latency = <250000>;
> + start-latency = <250000>;
> + save-state-latency = <250000>;
> + restore-state-latency = <250000>;

As per comment for the previous patch, I think you should remove these
latencies.

> + #pwm-cells = <3>;
> + };
> --
> 1.9.1
>

When you fixed the above you may add my reviewed by tag for this patch.

Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/