RE: [PATCH v5] mfd: syscon: Decouple syscon interface from platform devices

From: Pankaj Dubey
Date: Fri Sep 26 2014 - 00:57:35 EST


Hi Heiko and Joachim,

> -----Original Message-----
> From: Heiko Stübner [mailto:heiko@xxxxxxxxx]
> Sent: Thursday, September 25, 2014 5:52 PM
> To: Pankaj Dubey
> Cc: Joachim Eastwood; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-samsung-
> soc@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; kgene.kim@xxxxxxxxxxx;
> Russell King - ARM Linux; Arnd Bergmann; naushad@xxxxxxxxxxx;
> b29396@xxxxxxxxxxxxx; tomasz.figa@xxxxxxxxx; joshi@xxxxxxxxxxx;
> thomas.ab@xxxxxxxxxxx; Li.Xiubo@xxxxxxxxxxxxx; vikas.sajjan@xxxxxxxxxxx;
> chow.kim@xxxxxxxxxxx; lee.jones@xxxxxxxxxx; dianders@xxxxxxxxxxxx
> Subject: Re: [PATCH v5] mfd: syscon: Decouple syscon interface from
platform
> devices
>
> Am Mittwoch, 24. September 2014, 20:35:10 schrieb Heiko Stübner:
> > Hi Pankaj, Joachim,
> >
> > Am Dienstag, 23. September 2014, 20:12:50 schrieb Joachim Eastwood:
> > > On 22 September 2014 06:40, Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
> wrote:
> > > > Currently a syscon entity can be only registered directly through
> > > > a platform device that binds to a dedicated syscon driver. However
> > > > in certain use cases it is desirable to make a device used with
> > > > another driver a syscon interface provider.
> > > >
> > > > For example, certain SoCs (e.g. Exynos) contain system controller
> > > > blocks which perform various functions such as power domain
> > > > control, CPU power management, low power mode control, but in
> > > > addition contain certain IP integration glue, such as various
> > > > signal masks, coprocessor power control, etc. In such case, there
> > > > is a need to have a dedicated driver for such system controller
> > > > but also share registers with other drivers. The latter is where the
syscon
> interface is helpful.
> > > >
> > > > In case of DT based platforms, this patch decouples syscon object
> > > > from syscon platform driver, and allows to create syscon objects
> > > > first time when it is required by calling of
> > > > syscon_regmap_lookup_by APIs and keep a list of such syscon
> > > > objects along with syscon provider device_nodes and regmap handles.
> > > >
> > > > For non-DT based platforms, this patch keeps syscon platform
> > > > driver structure where is can be probed and such non-DT based
> > > > drivers can use syscon_regmap_lookup_by_pdev API and get access to
> regmap handles.
> > > > Once all users of "syscon_regmap_lookup_by_pdev" migrated to DT
> > > > based, we can completly remove platform driver of syscon, and keep
> > > > only helper functions to get regmap handles.
> > > >
> > > > Suggested-by: Arnd Bergmann <arnd@xxxxxxxx>
> > > > Suggested-by: Tomasz Figa <tomasz.figa@xxxxxxxxx>
> > > > Tested-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
> > > > Tested-by: Javier Martinez Canillas
> > > > <javier.martinez@xxxxxxxxxxxxxxx>
> > > > Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
> > >
> > > I wrote a clk driver using syscon and your patch. clk driver uses
> > > CLK_OF_DECLARE, btw.
> > >
> > > It works but I get a '(null): Failed to create debugfs directory'
> > > message in the boot log.
> > >
> > > Tested-by: Joachim Eastwood <manabian@xxxxxxxxx>
> >
> > on Rockchip platforms this syscon support also helps quite a bit, as
> > the pll lock-status is sitting in an external syscon register, so
> > setting target pll-rates through assigned-clocks is not easily doable
without it.
> > Therefore I'm very much looking forward to this.
> >
> >
> > Similar to Joachim I get an error about debugfs from regmap, which
> > seems to be caused by
> > name = dev_name(map->dev);
> > returning NULL in regmap_debugfs_init in regmap-debugfs.c for such an
> > "early" syscon.
>
> It looks like of_device_make_bus_id would be able to do the necessary
steps to
> populate the dev_name seemingly correctly.
>
> With the diff below I now get a syscon that can init clocks and also a
sane regmap
> debugfs init:
>
> /debug/regmap # ls -la
> total 0
> drwxr-xr-x 5 0 0 0 Jan 1 1970 .
> drwx------ 19 0 0 0 Jan 1 1970 ..
> drwxr-xr-x 2 0 0 0 Jan 1 1970 0-001b
> drwxr-xr-x 2 0 0 0 Jan 1 1970
ff730000.power-management
> drwxr-xr-x 2 0 0 0 Jan 1 1970 ff770000.syscon
>
>
> But of course I don't know enough about device-internals to determine if
this is an
> insane solution or not :-)
>

Thanks Heiko for figuring out issue and proposed solution.

As you and Joachim pointed out that current patch failed to create regmap
debugfs entry,
I also investigated and found that it fails to create regmap debugfs entry
either you call it
early (from init_irq or clk_init function) or you call it in later stage
before actual device is
populated (from init_machine before of_platform_populate_device).

One point is regmap debugfs code should have handled it gracefully instead
of kernel panic,
so looks like it needs some fix in that part of code.

I tried Heiko's suggested solution of calling "of_device_make_bus_id" after
platform_device_alloc
and it worked well and I tested it from init_irq as well as clk_init, which
happens at very early stage.
Maybe Joachim can also try if it's working for him.

Only concerns for this approach: Is it proper way of doing this?

In my opinion it could be, if we are not getting any other approach of
handling early syscon.

I also tried to get any other solution for handling debugfs entry, and found
one more solution.
But it will work only for late users of syscon:

pdev = platform_device_alloc("dummy-syscon", -1);
ret = platform_device_add(pdev);

It can solve issue of regmap debugfs for late users, i.e. if we try to use
syscon_lookup_by APIs not before
init_machine. But this will not work for early users of syscon, as I can see
that "platform_device_add"
fails (kernel panic) if we call it from init_irq or clk_init.

Meanwhile I have posted a fix [1] for this so that if someone calls
platform_device_add at very early
stage at least it should not panic and kernel should handle it gracefully.

[1]: https://lkml.org/lkml/2014/9/24/348

Also as I mentioned earlier, providing feature of early syscon availability
was not the main objective of this
patch, so just to make sure that this should not be a blocking factor for
current patch I would like to split
patch in two steps to address to different issues:

1: First patch will cover existing users and allow any such users to create
actual platform device and register
their own platform driver, instead of syscon getting probed first.
I will make sure that it should not break existing users or any existing
functionality (including debugfs).

2: Second on top of this patch we can have discussion how to go for early
syscon users.

Thanks,
Pankaj Dubey
>
> Heiko
>
>
> diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index
8ebc1c6..3734434
> 100644
> --- a/drivers/mfd/syscon.c
> +++ b/drivers/mfd/syscon.c
> @@ -73,6 +73,7 @@ static struct syscon *of_syscon_register(struct
device_node
> *np)
> goto err_pdev;
> }
> pdev->dev.of_node = of_node_get(np);
> + of_device_make_bus_id(&pdev->dev);
> }
>
> regmap = devm_regmap_init_mmio(&pdev->dev, base,
> &syscon_regmap_config);

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/