[PATCH v3 10/13] ARM: shmobile: r8a7740 dtsi: Add PM domain support
From: Geert Uytterhoeven
Date: Thu Sep 25 2014 - 12:29:59 EST
Add a device node for the System Controller, with subnodes that
represent the hardware power area hierarchy.
Hook up all devices to their respective PM domains.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
This depends on "[PATCH] ARM: hw_breakpoint: Trap undef instruction
exceptions on wake-up", or an alternative solution. Else resuming from
s2ram will cause a crash.
As the HDMI-Link device is not yet instantiated from DT, this does not
depend on "[PATCH/RFC] fbdev: sh_mobile_hdmi: Re-init regs before irq
re-enable on resume".
v3:
- Move power-on/off latencies to a separate patch,
- Add dependencies,
v2:
- Insert power-domains property after clock-names property in the cmt1
node.
arch/arm/boot/dts/r8a7740.dtsi | 101 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 101 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 502483f4dccb2f45..4fead480a405bebe 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -25,6 +25,7 @@
device_type = "cpu";
reg = <0x0>;
clock-frequency = <800000000>;
+ power-domains = <&pd_a3sm>;
};
};
@@ -47,6 +48,7 @@
interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
clock-names = "fck";
+ power-domains = <&pd_c5>;
renesas,channels-mask = <0x3f>;
@@ -72,6 +74,7 @@
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+ power-domains = <&pd_a4s>;
};
/* irqpin1: IRQ8 - IRQ15 */
@@ -93,6 +96,7 @@
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+ power-domains = <&pd_a4s>;
};
/* irqpin2: IRQ16 - IRQ23 */
@@ -114,6 +118,7 @@
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+ power-domains = <&pd_a4s>;
};
/* irqpin3: IRQ24 - IRQ31 */
@@ -135,6 +140,7 @@
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+ power-domains = <&pd_a4s>;
};
ether: ethernet@e9a00000 {
@@ -143,6 +149,7 @@
<0xe9a01800 0x800>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
+ power-domains = <&pd_a4s>;
phy-mode = "mii";
#address-cells = <1>;
#size-cells = <0>;
@@ -159,6 +166,7 @@
0 203 IRQ_TYPE_LEVEL_HIGH
0 204 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
+ power-domains = <&pd_a4r>;
status = "disabled";
};
@@ -172,6 +180,7 @@
0 72 IRQ_TYPE_LEVEL_HIGH
0 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -181,6 +190,7 @@
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -190,6 +200,7 @@
interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -199,6 +210,7 @@
interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -208,6 +220,7 @@
interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -217,6 +230,7 @@
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -226,6 +240,7 @@
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -235,6 +250,7 @@
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -244,6 +260,7 @@
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -253,6 +270,7 @@
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -271,12 +289,14 @@
<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+ power-domains = <&pd_c5>;
};
tpu: pwm@e6600000 {
compatible = "renesas,tpu-r8a7740", "renesas,tpu";
reg = <0xe6600000 0x100>;
clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
#pwm-cells = <3>;
};
@@ -287,6 +307,7 @@
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
0 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_MMC>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -297,6 +318,7 @@
0 118 IRQ_TYPE_LEVEL_HIGH
0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
+ power-domains = <&pd_a3sp>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -309,6 +331,7 @@
0 122 IRQ_TYPE_LEVEL_HIGH
0 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
+ power-domains = <&pd_a3sp>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -321,6 +344,7 @@
0 126 IRQ_TYPE_LEVEL_HIGH
0 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
+ power-domains = <&pd_a3sp>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -332,6 +356,7 @@
reg = <0xfe1f0000 0x400>;
interrupts = <0 9 0x4>;
clocks = <&mstp3_clks R8A7740_CLK_FSI>;
+ power-domains = <&pd_a4mp>;
status = "disabled";
};
@@ -383,6 +408,7 @@
compatible = "renesas,r8a7740-cpg-clocks";
reg = <0xe6150000 0x10000>;
clocks = <&extal1_clk>, <&extalr_clk>;
+ power-domains = <&pd_c5>;
#clock-cells = <1>;
clock-output-names = "system", "pllc0", "pllc1",
"pllc2", "r",
@@ -397,6 +423,7 @@
compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
reg = <0xe6150080 4>;
clocks = <&pllc1_div2_clk>;
+ power-domains = <&pd_c5>;
#clock-cells = <0>;
clock-output-names = "sub";
};
@@ -405,6 +432,7 @@
pllc1_div2_clk: pllc1_div2_clk {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7740_CLK_PLLC1>;
+ power-domains = <&pd_c5>;
#clock-cells = <0>;
clock-div = <2>;
clock-mult = <1>;
@@ -413,6 +441,7 @@
extal1_div2_clk: extal1_div2_clk {
compatible = "fixed-factor-clock";
clocks = <&extal1_clk>;
+ power-domains = <&pd_c5>;
#clock-cells = <0>;
clock-div = <2>;
clock-mult = <1>;
@@ -424,6 +453,7 @@
compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xe6150080 4>;
clocks = <&sub_clk>, <&sub_clk>;
+ power-domains = <&pd_c5>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7740_CLK_SUBCK R8A7740_CLK_SUBCK2
@@ -439,6 +469,7 @@
<&cpg_clocks R8A7740_CLK_B>,
<&sub_clk>, <&sub_clk>,
<&cpg_clocks R8A7740_CLK_B>;
+ power-domains = <&pd_c5>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7740_CLK_CEU21 R8A7740_CLK_CEU20 R8A7740_CLK_TMU0
@@ -460,6 +491,7 @@
<&sub_clk>, <&sub_clk>, <&sub_clk>,
<&sub_clk>, <&sub_clk>, <&sub_clk>,
<&sub_clk>;
+ power-domains = <&pd_c5>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7740_CLK_SCIFA6 R8A7740_CLK_INTCA
@@ -489,6 +521,7 @@
<&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>;
+ power-domains = <&pd_c5>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7740_CLK_CMT1 R8A7740_CLK_FSI R8A7740_CLK_IIC1
@@ -506,6 +539,7 @@
<&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>;
+ power-domains = <&pd_c5>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7740_CLK_USBH R8A7740_CLK_SDHI2
@@ -515,4 +549,71 @@
"usbhost", "sdhi2", "usbfunc", "usphy";
};
};
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
+ reg = <0xe6180000 8000>, <0xe6188000 8000>;
+
+ pm-domains {
+ pd_c5: c5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a4lc: a4lc@1 {
+ reg = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a4mp: a4mp@2 {
+ reg = <2>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_d4: d4@3 {
+ reg = <3>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a4r: a4r@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a3rv: a3rv@6 {
+ reg = <6>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ pd_a4s: a4s@10 {
+ reg = <10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a3sp: a3sp@11 {
+ reg = <11>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a3sm: a3sm@12 {
+ reg = <12>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a3sg: a3sg@13 {
+ reg = <13>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ pd_a4su: a4su@20 {
+ reg = <20>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+ };
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/