Re: [PATCH 2/2] mmc: rtsx_pci: Set power related cap2 macros

From: Ulf Hansson
Date: Wed Sep 24 2014 - 05:24:31 EST


On 24 September 2014 11:07, Roger Tseng <rogerable@xxxxxxxxxxx> wrote:
> Set MMC_CAP2_NO_PRESCAN_POWERUP and MMC_CAP2_FULL_PWR_CYCLE for
> rtsx_pci_sdmmc and rtsx_usb_sdmmc to reflect properties of Realtek
> card reader hosts.
>
> Signed-off-by: Roger Tseng <rogerable@xxxxxxxxxxx>

Thanks! Applied for next!

Kind regards
Uffe

> ---
> drivers/mmc/host/rtsx_pci_sdmmc.c | 1 +
> drivers/mmc/host/rtsx_usb_sdmmc.c | 1 +
> 2 files changed, 2 insertions(+)
>
> diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
> index dfde4a210238..d49460b5ff07 100644
> --- a/drivers/mmc/host/rtsx_pci_sdmmc.c
> +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
> @@ -1292,6 +1292,7 @@ static void realtek_init_host(struct realtek_pci_sdmmc *host)
> mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED |
> MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST |
> MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
> + mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP | MMC_CAP2_FULL_PWR_CYCLE;
> mmc->max_current_330 = 400;
> mmc->max_current_180 = 800;
> mmc->ops = &realtek_pci_sdmmc_ops;
> diff --git a/drivers/mmc/host/rtsx_usb_sdmmc.c b/drivers/mmc/host/rtsx_usb_sdmmc.c
> index 5d3766e792f0..a884631d7eea 100644
> --- a/drivers/mmc/host/rtsx_usb_sdmmc.c
> +++ b/drivers/mmc/host/rtsx_usb_sdmmc.c
> @@ -1329,6 +1329,7 @@ static void rtsx_usb_init_host(struct rtsx_usb_sdmmc *host)
> MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST |
> MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR50 |
> MMC_CAP_NEEDS_POLL;
> + mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP | MMC_CAP2_FULL_PWR_CYCLE;
>
> mmc->max_current_330 = 400;
> mmc->max_current_180 = 800;
> --
> 1.7.10.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/