[PATCH v6 00/12] ARM: berlin: USB support

From: Antoine Tenart
Date: Tue Sep 23 2014 - 06:34:02 EST


This series adds the support for ChipIdea USB2 (ci13xxx) controllers,
the USB PHYs of the Marvell Berlin SoCs and also adds a reset
controller for these SoCs.

The reset controller is used by the PHY driver and shares the
existing chip controller node with the clocks and one pin controller.

The Marvell Berlin USB controllers are host only on the BG2Q and are
compatible with USB ChipIdea. We here add a glue to use the available
common functions for this kind of controllers, and add a generic USB2
ChipIdea driver. A PHY driver is also added to control the USB PHY.

This series applies on top of the generic PHY support in the USB
framework[1].

Patches 1-4 have already been taken by Sebastian.

Changes since v5:
- added a missing header in ci_hdrc_usb2

Changes since v4:
- fixed the error handling of ci_hdrc_usb2_probe()

Changes since v3:
- removed the DMA mask property
- moved the clock handling in the common probe function
- fixed the documentation for the USB2 ChipIdea USB PHY binding
- made sure the reset bit is 0-31 in the reset driver

Changes since v2:
- moved the PHY driver to the generic PHY framework
- changed the compatible to 'chipidea,usb2'
- added a property to set the DMA mask in the USB2 CI driver
- separated dt specific calls in the CI probing function
- rebased on top of the generic PHY support for CI[1]

Changes since v1:
- made the Berlin CI USB driver a generic one
- added support to custom offset for the reset register
- added fixed regulators to support supply the VBUS
- modified the PHY driver to support the one one the BG2CD as
well
- documented the reset properties
- added bindings for the BG2CD
- cosmetic fixes

[1] git://git.free-electrons.com:users/antoine-tenart/linux.git usb-phy

Antoine Tenart (10):
reset: add the Berlin reset controller driver
Documentation: bindings: add reset bindings docs for Marvell Berlin
SoCs
ARM: Berlin: select the reset controller
ARM: dts: berlin: add a required reset property in the chip controller
node
phy: add the Berlin USB PHY driver
Documentation: bindings: add doc for the Berlin USB PHY
usb: chipidea: add a usb2 driver for ci13xxx
Documentation: bindings: add doc for the USB2 ChipIdea USB driver
ARM: dts: berlin: add BG2Q nodes for USB support
ARM: dts: Berlin: enable USB on the BG2Q DMP

Sebastian Hesselbarth (2):
ARM: dts: berlin: add BG2CD nodes for USB support
ARM: dts: berlin: enable USB on the Google Chromecast

.../devicetree/bindings/arm/marvell,berlin.txt | 10 +
.../devicetree/bindings/phy/berlin-usb-phy.txt | 16 ++
.../devicetree/bindings/usb/ci-hdrc-usb2.txt | 22 ++
arch/arm/boot/dts/berlin2.dtsi | 1 +
arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 4 +
arch/arm/boot/dts/berlin2cd.dtsi | 35 ++++
arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 53 +++++
arch/arm/boot/dts/berlin2q.dtsi | 53 +++++
arch/arm/mach-berlin/Kconfig | 2 +
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-berlin-usb.c | 224 +++++++++++++++++++++
drivers/reset/Makefile | 1 +
drivers/reset/reset-berlin.c | 131 ++++++++++++
drivers/usb/chipidea/Makefile | 1 +
drivers/usb/chipidea/ci_hdrc_usb2.c | 138 +++++++++++++
16 files changed, 699 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/berlin-usb-phy.txt
create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
create mode 100644 drivers/phy/phy-berlin-usb.c
create mode 100644 drivers/reset/reset-berlin.c
create mode 100644 drivers/usb/chipidea/ci_hdrc_usb2.c

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/