Re: [PATCH] ARM: dts: Add Maxim 77693 PMIC to the Trats2 board

[Javier Martinez Canillas]

Hello Krzysztof,

On Fri, Sep 12, 2014 at 2:03 PM, Krzysztof Kozlowski
<k.kozlowski@xxxxxxxxxxx> wrote:
> +       i2c_max77693: i2c-gpio-1 {
> +               compatible = "i2c-gpio";
> +               gpios = <&gpm2 0 0>, <&gpm2 1 0 >;

Can you please include <dt-bindings/gpio/gpio.h> and use
GPIO_ACTIVE_HIGH instead of 0 here for the type/level flags?

> +               i2c-gpio,delay-us = <2>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               status = "okay";
> +
> +               max77693@66 {
> +                       compatible = "maxim,max77693";
> +                       interrupt-parent = <&gpx1>;
> +                       interrupts = <5 2>;
> +                       reg = <0x66>;
> +
> +                       regulators {
> +                               esafeout1_reg: esafeout@1 {
> +                                       regulator-compatible = "ESAFEOUT1";

According to Documentation/devicetree/bindings/regulator/regulator.txt,
the "regulator-compatible" DT property has been deprecated in favor of
just using the regulator node's name.

> +                                       regulator-name = "ESAFEOUT1";
> +                               };
> +                               esafeout2_reg: esafeout@2 {
> +                                       regulator-compatible = "ESAFEOUT2";
> +                                       regulator-name = "ESAFEOUT2";
> +                               };
> +                               charger_reg: charger@0 {
> +                                       regulator-compatible = "CHARGER";
> +                                       regulator-name = "CHARGER";
> +                                       regulator-min-microamp = <60000>;
> +                                       regulator-max-microamp = <2580000>;
> +                               };
> +                       };
> +               };
> +       };
> +
>         mmc@12550000 {
>                 num-slots = <1>;
>                 supports-highspeed;
>

Once those two issues are addressed, feel free to add my

Reviewed-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>

Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/