Re: [Patch v9 2/3] usb: dwc3: Add Qualcomm DWC3 glue layer driver

From: Felipe Balbi
Date: Fri Sep 12 2014 - 16:21:05 EST


On Sat, Sep 13, 2014 at 01:44:25AM +0530, Pramod Gurav wrote:
> Andy,
> Couple of minor comments.
>
> On Sat, Sep 13, 2014 at 12:58 AM, Andy Gross <agross@xxxxxxxxxxxxxx> wrote:
>
> > From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
> >
> > DWC3 glue layer is hardware layer around Synopsys DesignWare
> > USB3 core. Its purpose is to supply Synopsys IP with required
> > clocks, voltages and interface it with the rest of the SoC.
> >
> > Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
> > Signed-off-by: Andy Gross <agross@xxxxxxxxxxxxxx>
> > ---
> > drivers/usb/dwc3/Kconfig | 8 +++
> > drivers/usb/dwc3/Makefile | 1 +
> > drivers/usb/dwc3/dwc3-qcom.c | 131
> > ++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 140 insertions(+)
> > create mode 100644 drivers/usb/dwc3/dwc3-qcom.c
> >
> >
> <..>
>
>
> > +#include <linux/platform_device.h>
> > +
> > +struct dwc3_qcom {
> > + struct device *dev;
> > +
> >
> Extra new line here.

that's not an issue however.

> > + struct clk *core_clk;
> > + struct clk *iface_clk;
> > + struct clk *sleep_clk;
> > +};
> > +
> > +static int dwc3_qcom_probe(struct platform_device *pdev)
> > +{
> > + struct device_node *node = pdev->dev.of_node;
> > + struct dwc3_qcom *qdwc;
> > + int ret = 0;
> >
> Initialization not required.

I'll fix this one as I'm already applying this patch.

> > +
> > + qdwc = devm_kzalloc(&pdev->dev, sizeof(*qdwc), GFP_KERNEL);
> > + if (!qdwc)
> > + return -ENOMEM;
> > +
> > + platform_set_drvdata(pdev, qdwc);
> > +
> > + qdwc->dev = &pdev->dev;
> > +
> > + qdwc->core_clk = devm_clk_get(qdwc->dev, "core");
> > + if (IS_ERR(qdwc->core_clk)) {
> > + dev_err(qdwc->dev, "failed to get core clock\n");
> > + return PTR_ERR(qdwc->core_clk);
> > + }
> > +
> > + qdwc->iface_clk = devm_clk_get(qdwc->dev, "iface");
> > + if (IS_ERR(qdwc->iface_clk)) {
> > + dev_dbg(qdwc->dev, "failed to get optional iface clock\n");
> > + qdwc->iface_clk = NULL;
> > + }
> > +
> > + qdwc->sleep_clk = devm_clk_get(qdwc->dev, "sleep");
> > + if (IS_ERR(qdwc->sleep_clk)) {
> > + dev_dbg(qdwc->dev, "failed to get optional sleep clock\n");
> > + qdwc->sleep_clk = NULL;
> > + }
> > +
> > + ret = clk_prepare_enable(qdwc->core_clk);
> > + if (ret) {
> > + dev_err(qdwc->dev, "failed to enable core clock\n");
> > + goto err_core;
> > + }
> > +
> > + ret = clk_prepare_enable(qdwc->iface_clk);
> >
> Should not we check if qdwc->iface_clk is valid?

read the sources luke.

> > +err_clks:
> > + clk_disable_unprepare(qdwc->sleep_clk);
> >
> IS_ERR check before above statement not needed as we have continued with
> probe even after failure og devm_clk_get?

read more carefully, there's a detail which you're missing.

--
balbi

Attachment: signature.asc
Description: Digital signature