[RFC v2 3/3] memory: tegra124-emc: Add EMC driver

From: Tomeu Vizoso
Date: Fri Aug 15 2014 - 08:52:59 EST


Sets the EMC clock rate based on the bandwidth requirements registered by
memory clients through the PM_QOS_MEMORY_BANDWIDTH class.

Note: this is not a proper driver for a external memory controller. Its only
purpose is to illustrate how such a driver would set the frequency of the
external memory clock based on the bandwidth requirements of memory clients.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
---
drivers/memory/Kconfig | 8 +++
drivers/memory/Makefile | 1 +
drivers/memory/tegra124-emc.c | 115 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 124 insertions(+)
create mode 100644 drivers/memory/tegra124-emc.c

diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index c59e9c9..48fa0dd 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -61,6 +61,14 @@ config TEGRA30_MC
analysis, especially for IOMMU/SMMU(System Memory Management
Unit) module.

+config TEGRA124_EMC
+ tristate "Tegra124 External Memory Controller (EMC) driver"
+ default y
+ depends on ARCH_TEGRA_124_SOC
+ help
+ This driver is for the External Memory Controller (EMC) module
+ available in Tegra124 SoCs.
+
config FSL_IFC
bool
depends on FSL_SOC
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index 71160a2..0b7290b 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o
obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o
obj-$(CONFIG_TEGRA30_MC) += tegra30-mc.o
+obj-$(CONFIG_TEGRA124_EMC) += tegra124-emc.o
diff --git a/drivers/memory/tegra124-emc.c b/drivers/memory/tegra124-emc.c
new file mode 100644
index 0000000..53a34bd
--- /dev/null
+++ b/drivers/memory/tegra124-emc.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/pm_qos.h>
+
+#define DRV_NAME "tegra124-emc"
+#define EMC_FREQ_CUTOFF_USE_130_PERCENT 100000000
+#define EMC_FREQ_CUTOFF_USE_140_PERCENT 50000000
+#define BYTES_PER_EMC_CLOCK 16
+
+struct tegra124_emc {
+ struct clk *clk;
+ struct notifier_block memory_bw_notifier;
+};
+
+static struct platform_device *emc_pdev;
+
+static unsigned long tegra124_emc_bw_to_freq_req(unsigned long bw)
+{
+ return (bw + BYTES_PER_EMC_CLOCK - 1) / BYTES_PER_EMC_CLOCK;
+}
+
+static void tegra124_emc_update_rate(struct tegra124_emc *emc, unsigned long total_bandwidth)
+{
+ struct clk *emc_master;
+ unsigned long freq;
+
+ emc_master = clk_get_parent(emc->clk);
+ freq = tegra124_emc_bw_to_freq_req(total_bandwidth) * 1000;
+ freq = clk_round_rate(emc_master, freq);
+
+ /* Depending on frequency value, the amount of bandwidth usage % of
+ * total we should use is different. Thus we should request a multiple of
+ * original bandwidth on this. Use 1.4 for < 50MHz, 1.3 for < 100MHz,
+ * else 1.1 */
+ if (freq < EMC_FREQ_CUTOFF_USE_140_PERCENT)
+ total_bandwidth += 4 * total_bandwidth / 10; /* 1.4 */
+ else if (freq < EMC_FREQ_CUTOFF_USE_130_PERCENT)
+ total_bandwidth += 3 * total_bandwidth / 10; /* 1.3 */
+ else
+ total_bandwidth += total_bandwidth / 10; /* 1.1 */
+
+ freq = tegra124_emc_bw_to_freq_req(total_bandwidth) * 1000;
+
+ clk_set_floor_rate(emc->clk, freq);
+}
+
+int memory_bw_notify(struct notifier_block *nb, unsigned long total_bw, void *dummy)
+{
+ struct tegra124_emc *emc =
+ container_of(nb, struct tegra124_emc,
+ memory_bw_notifier);
+
+ tegra124_emc_update_rate(emc, total_bw);
+
+ return NOTIFY_OK;
+}
+
+static int tegra124_emc_probe(struct platform_device *pdev)
+{
+ struct tegra124_emc *emc;
+
+ emc_pdev = pdev;
+
+ emc = devm_kzalloc(&pdev->dev, sizeof(*emc), GFP_KERNEL);
+ if (emc == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate private memory\n");
+ return -ENOMEM;
+ }
+
+ emc->clk = clk_get(&pdev->dev, "emc");
+ if (IS_ERR(emc->clk)) {
+ devm_kfree(&pdev->dev, emc);
+ dev_err(&pdev->dev, "Can not find EMC clock\n");
+ return -EINVAL;
+ }
+
+ platform_set_drvdata(emc_pdev, emc);
+
+ emc->memory_bw_notifier.notifier_call = memory_bw_notify;
+ pm_qos_add_notifier(PM_QOS_MEMORY_BANDWIDTH, &emc->memory_bw_notifier);
+
+ return 0;
+}
+
+static struct platform_driver tegra124_emc_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = tegra124_emc_probe,
+};
+
+module_platform_driver(tegra124_emc_driver);
+
+MODULE_AUTHOR("Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Tegra124 EMC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRV_NAME);
--
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/