Re: [RFC PATCH 4/9] irqchip: GIC: add support for forwarded interrupts

From: Christoffer Dall
Date: Wed Aug 06 2014 - 07:30:27 EST


On Wed, Jun 25, 2014 at 10:28:45AM +0100, Marc Zyngier wrote:
> Now that we've switched to EOImode == 1, prevent a forwarded interrupt
> from being deactivated after its priority has been dropped.
>
> Also add support for the interrupt state to be saved/restored.
>
> Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx>
> ---
> drivers/irqchip/irq-gic.c | 48 +++++++++++++++++++++++++++++++++++++++++------
> 1 file changed, 42 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
> index 9295bf2..bde1637 100644
> --- a/drivers/irqchip/irq-gic.c
> +++ b/drivers/irqchip/irq-gic.c
> @@ -157,12 +157,22 @@ static inline unsigned int gic_irq(struct irq_data *d)
> /*
> * Routines to acknowledge, disable and enable interrupts
> */
> -static void gic_mask_irq(struct irq_data *d)
> +static void gic_poke_irq(struct irq_data *d, u32 offset)
> +{
> + u32 mask = 1 << (gic_irq(d) % 32);
> + writel_relaxed(mask, gic_dist_base(d) + offset + (gic_irq(d) / 32) * 4);
> +}
> +
> +static int gic_peek_irq(struct irq_data *d, u32 offset)
> {
> u32 mask = 1 << (gic_irq(d) % 32);
> + return !!(readl_relaxed(gic_dist_base(d) + offset + (gic_irq(d) / 32) * 4) & mask);
> +}
>
> +static void gic_mask_irq(struct irq_data *d)
> +{
> raw_spin_lock(&irq_controller_lock);
> - writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
> + gic_poke_irq(d, GIC_DIST_ENABLE_CLEAR);
> if (gic_arch_extn.irq_mask)
> gic_arch_extn.irq_mask(d);
> raw_spin_unlock(&irq_controller_lock);
> @@ -170,12 +180,10 @@ static void gic_mask_irq(struct irq_data *d)
>
> static void gic_unmask_irq(struct irq_data *d)
> {
> - u32 mask = 1 << (gic_irq(d) % 32);
> -
> raw_spin_lock(&irq_controller_lock);
> if (gic_arch_extn.irq_unmask)
> gic_arch_extn.irq_unmask(d);
> - writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4);
> + gic_poke_irq(d, GIC_DIST_ENABLE_SET);
> raw_spin_unlock(&irq_controller_lock);
> }
>
> @@ -193,7 +201,33 @@ static void gic_eoi_irq(struct irq_data *d)
> static void gic_eoi_dir_irq(struct irq_data *d)
> {
> gic_eoi_irq(d);
> - writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_DEACTIVATE);
> + if (!irqd_irq_forwarded(d))
> + writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_DEACTIVATE);
> +}
> +
> +static void gic_irq_set_fwd_state(struct irq_data *d, u32 val, u32 mask)
> +{
> + if (mask & IRQ_FWD_STATE_PENDING)
> + gic_poke_irq(d, (val & IRQ_FWD_STATE_PENDING) ? GIC_DIST_ENABLE_SET : GIC_DIST_ENABLE_CLEAR);

Why are you masking/unmasking the interrupt on the pending bit? Did you
mean GIC_DIST_PENDING_{SET,CLEAR} ?

> + if (mask & IRQ_FWD_STATE_ACTIVE)
> + gic_poke_irq(d, (val & IRQ_FWD_STATE_ACTIVE) ? GIC_DIST_ACTIVE_SET : GIC_DIST_ACTIVE_CLEAR);
> + if (mask & IRQ_FWD_STATE_MASKED)
> + gic_poke_irq(d, (val & IRQ_FWD_STATE_MASKED) ? GIC_DIST_ENABLE_CLEAR : GIC_DIST_ENABLE_SET);
> +
> +}
> +
> +static u32 gic_irq_get_fwd_state(struct irq_data *d, u32 mask)
> +{
> + u32 val = 0;
> +
> + if (mask & IRQ_FWD_STATE_PENDING && gic_peek_irq(d, GIC_DIST_ENABLE_SET))
> + val |= IRQ_FWD_STATE_PENDING;

same

> + if (mask & IRQ_FWD_STATE_ACTIVE && gic_peek_irq(d, GIC_DIST_ACTIVE_SET))
> + val |= IRQ_FWD_STATE_ACTIVE;
> + if (mask & IRQ_FWD_STATE_MASKED && !gic_peek_irq(d, GIC_DIST_ENABLE_SET))
> + val |= IRQ_FWD_STATE_MASKED;
> +
> + return val;
> }
>
> static int gic_set_type(struct irq_data *d, unsigned int type)
> @@ -349,6 +383,8 @@ static struct irq_chip gicv2_chip = {
> .irq_set_affinity = gic_set_affinity,
> #endif
> .irq_set_wake = gic_set_wake,
> + .irq_get_fwd_state = gic_irq_get_fwd_state,
> + .irq_set_fwd_state = gic_irq_set_fwd_state,
> };
>
> void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
> --
> 1.8.3.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/