Re: [PATCH v3 tip/core/rcu 1/9] rcu: Add call_rcu_tasks()

From: Lai Jiangshan
Date: Tue Aug 05 2014 - 20:26:41 EST


On 08/06/2014 05:55 AM, Paul E. McKenney wrote:
> On Tue, Aug 05, 2014 at 08:47:55AM +0800, Lai Jiangshan wrote:
>> On 08/04/2014 10:56 PM, Peter Zijlstra wrote:
>>> On Mon, Aug 04, 2014 at 02:25:15PM +0200, Peter Zijlstra wrote:
>>>> On Mon, Aug 04, 2014 at 04:50:44AM -0700, Paul E. McKenney wrote:
>>>>> OK, I will bite...
>>>>>
>>>>> What kinds of tasks are on a runqueue, but neither ->on_cpu nor
>>>>> PREEMPT_ACTIVE?
>>>>
>>>> Userspace tasks, they don't necessarily get PREEMPT_ACTIVE when
>>>> preempted. Now obviously you're not _that_ interested in userspace tasks
>>>> for this, so that might be ok.
>>>>
>>>> But the main point was, you cannot use ->on_cpu or PREEMPT_ACTIVE
>>>> without holding rq->lock.
>>>
>>> Hmm, maybe you can, we have the context switch in between setting
>>> ->on_cpu and clearing PREEMPT_ACTIVE and vice-versa.
>>>
>>> The context switch (obviously) provides a full barrier, so we might be
>>> able to -- with careful consideration -- read these two separate values
>>> and construct something usable from them.
>>>
>>> Something like:
>>>
>>> task_preempt_count(tsk) & PREEMPT_ACTIVE
>> the @tsk is running on_cpu, the above result is false.
>>> smp_rmb();
>>> tsk->on_cpu
>> now the @tsk is preempted, the above result also is false.
>>
>> so it is useless if we fetch the preempt_count and on_cpu in two separated
>> instructions. Maybe it would work if we also take tsk->nivcsw in consideration.
>> (I just noticed that tsk->n[i]vcsw are the version numbers for the tsk->on_cpu)
>>
>> bool task_on_cpu_or_preempted(tsk)
>> {
>> unsigned long saved_nivcsw;
>>
>> saved_nivcsw = task->nivcsw;
>> if (tsk->on_cpu)
>> return true;
>>
>> smp_rmb();
>>
>> if (task_preempt_count(tsk) & PREEMPT_ACTIVE)
>> return true;
>>
>> smp_rmb();
>>
>> if (tsk->on_cpu || task->nivcsw != saved_nivcsw)
>> return true;
>>
>> return false;
>> }
>>
>>>
>>> And because we set PREEMPT_ACTIVE before clearing on_cpu, this should
>>> race the right way (err towards the inclusive side).
>>>
>>> Obviously that wants a big fat comment...
>
> How about the following? Non-nohz_full userspace tasks are already covered
> courtesy of scheduling-clock interrupts, and this handles nohz_full usermode
> tasks.

synchronize_rcu_tasks() is called extremely rare. Is it right? So I think it is
acceptable to interrupt the nohz_full usermode CPUs.

>
> Thoughts?
>
> Thanx, Paul
>
> ------------------------------------------------------------------------
>
> rcu: Make TASKS_RCU handle nohx_full= CPUs
>
> Currently TASKS_RCU would ignore a CPU running a task in nohz_full=
> usermode execution. There would be neither a context switch nor a
> scheduling-clock interrupt to tell TASKS_RCU that the task in question
> had passed through a quiescent state. The grace period would therefore
> extend indefinitely. This commit therefore makes RCU's dyntick-idle
> subsystem record the task_struct structure of the task that is running
> in dyntick-idle mode on each CPU. The TASKS_RCU grace period can
> then access this information and record a quiescent state on
> behalf of any CPU running in dyntick-idle usermode.
>
> Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
>
> diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
> index f504f797c9c8..777aac3a34c0 100644
> --- a/include/linux/rcupdate.h
> +++ b/include/linux/rcupdate.h
> @@ -1140,5 +1140,14 @@ static inline void rcu_sysidle_force_exit(void)
>
> #endif /* #else #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
>
> +#if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL)
> +struct task_struct *rcu_dynticks_task_cur(int cpu);
> +#else /* #if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL) */
> +static inline struct task_struct *rcu_dynticks_task_cur(int cpu)
> +{
> + return NULL;
> +}
> +#endif /* #else #if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL) */
> +
>
> #endif /* __LINUX_RCUPDATE_H */
> diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
> index 645a33efc0d4..86a0a7d5bbbd 100644
> --- a/kernel/rcu/tree.c
> +++ b/kernel/rcu/tree.c
> @@ -526,6 +526,7 @@ static void rcu_eqs_enter_common(struct rcu_dynticks *rdtp, long long oldval,
> atomic_inc(&rdtp->dynticks);
> smp_mb__after_atomic(); /* Force ordering with next sojourn. */
> WARN_ON_ONCE(atomic_read(&rdtp->dynticks) & 0x1);
> + rcu_dynticks_task_enter(rdtp, current);
>
> /*
> * It is illegal to enter an extended quiescent state while
> @@ -642,6 +643,7 @@ void rcu_irq_exit(void)
> static void rcu_eqs_exit_common(struct rcu_dynticks *rdtp, long long oldval,
> int user)
> {
> + rcu_dynticks_task_exit(rdtp);
> smp_mb__before_atomic(); /* Force ordering w/previous sojourn. */
> atomic_inc(&rdtp->dynticks);
> /* CPUs seeing atomic_inc() must see later RCU read-side crit sects */
> diff --git a/kernel/rcu/tree.h b/kernel/rcu/tree.h
> index 0f69a79c5b7d..1e79fa1b7cbf 100644
> --- a/kernel/rcu/tree.h
> +++ b/kernel/rcu/tree.h
> @@ -88,6 +88,9 @@ struct rcu_dynticks {
> /* Process level is worth LLONG_MAX/2. */
> int dynticks_nmi_nesting; /* Track NMI nesting level. */
> atomic_t dynticks; /* Even value for idle, else odd. */
> +#if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL)
> + struct task_struct *dynticks_tsk;
> +#endif /* #if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL) */
> #ifdef CONFIG_NO_HZ_FULL_SYSIDLE
> long long dynticks_idle_nesting;
> /* irq/process nesting level from idle. */
> @@ -579,6 +582,9 @@ static void rcu_sysidle_report_gp(struct rcu_state *rsp, int isidle,
> static void rcu_bind_gp_kthread(void);
> static void rcu_sysidle_init_percpu_data(struct rcu_dynticks *rdtp);
> static bool rcu_nohz_full_cpu(struct rcu_state *rsp);
> +static void rcu_dynticks_task_enter(struct rcu_dynticks *rdtp,
> + struct task_struct *t);
> +static void rcu_dynticks_task_exit(struct rcu_dynticks *rdtp);
>
> #endif /* #ifndef RCU_TREE_NONCORE */
>
> diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
> index a86a363ea453..442d62edc564 100644
> --- a/kernel/rcu/tree_plugin.h
> +++ b/kernel/rcu/tree_plugin.h
> @@ -2852,3 +2852,29 @@ static void rcu_bind_gp_kthread(void)
> set_cpus_allowed_ptr(current, cpumask_of(cpu));
> #endif /* #ifdef CONFIG_NO_HZ_FULL */
> }
> +
> +/* Record the current task on dyntick-idle entry. */
> +static void rcu_dynticks_task_enter(struct rcu_dynticks *rdtp,
> + struct task_struct *t)
> +{
> +#if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL)
> + ACCESS_ONCE(rdtp->dynticks_tsk) = t;
> +#endif /* #if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL) */
> +}
> +
> +/* Record no current task on dyntick-idle exit. */
> +static void rcu_dynticks_task_exit(struct rcu_dynticks *rdtp)
> +{
> + rcu_dynticks_task_enter(rdtp, NULL);
> +}
> +
> +#if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL)
> +struct task_struct *rcu_dynticks_task_cur(int cpu)
> +{
> + struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
> + struct task_struct *t = ACCESS_ONCE(rdtp->dynticks_tsk);
> +
> + smp_read_barrier_depends(); /* Dereferences after fetch of "t". */
> + return t;
> +}
> +#endif /* #if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL) */
> diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c
> index ad2a8df43757..6ad6af2ab028 100644
> --- a/kernel/rcu/update.c
> +++ b/kernel/rcu/update.c
> @@ -481,6 +481,28 @@ static void check_holdout_task(struct task_struct *t,
> sched_show_task(current);
> }
>
> +/* Check for nohz_full CPUs executing in userspace. */
> +static void check_no_hz_full_tasks(void)
> +{
> +#ifdef CONFIG_NO_HZ_FULL
> + int cpu;
> + struct task_struct *t;
> +
> + for_each_online_cpu(cpu) {
> + cond_resched();
> + rcu_read_lock();
> + t = rcu_dynticks_task_cur(cpu);
> + if (t == NULL || is_idle_task(t)) {
> + rcu_read_unlock();
> + continue;
> + }
> + if (ACCESS_ONCE(t->rcu_tasks_holdout))
> + ACCESS_ONCE(t->rcu_tasks_holdout) = 0;
> + rcu_read_unlock();
> + }
> +#endif /* #ifdef CONFIG_NO_HZ_FULL */
> +}
> +
> /* RCU-tasks kthread that detects grace periods and invokes callbacks. */
> static int __noreturn rcu_tasks_kthread(void *arg)
> {
> @@ -584,6 +606,7 @@ static int __noreturn rcu_tasks_kthread(void *arg)
> lastreport = jiffies;
> firstreport = true;
> WARN_ON(signal_pending(current));
> + check_no_hz_full_tasks();
> rcu_read_lock();
> list_for_each_entry_rcu(t, &rcu_tasks_holdouts,
> rcu_tasks_holdout_list)
>
> .
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/