Re: [PATCH v2 5/5] kvm, mem-hotplug: Do not pin apic access page in memory.

From: Gleb Natapov
Date: Mon Jul 14 2014 - 10:58:48 EST


CCing Jan to check my nested kvm findings below.

On Mon, Jul 14, 2014 at 03:57:09PM +0800, Tang Chen wrote:
> Hi Gleb,
>
> Thanks for the reply. Please see below.
>
> On 07/12/2014 04:04 PM, Gleb Natapov wrote:
> >On Tue, Jul 08, 2014 at 09:01:32PM +0800, Tang Chen wrote:
> >>apic access page is pinned in memory. As a result, it cannot be migrated/hot-removed.
> >>Actually, it is not necessary to be pinned.
> >>
> >>The hpa of apic access page is stored in VMCS APIC_ACCESS_ADDR pointer. When
> >>the page is migrated, kvm_mmu_notifier_invalidate_page() will invalidate the
> >>corresponding ept entry. This patch introduces a new vcpu request named
> >>KVM_REQ_APIC_PAGE_RELOAD, and makes this request to all the vcpus at this time,
> >>and force all the vcpus exit guest, and re-enter guest till they updates the VMCS
> >>APIC_ACCESS_ADDR pointer to the new apic access page address, and updates
> >>kvm->arch.apic_access_page to the new page.
> >>
> >By default kvm Linux guest uses x2apic, so APIC_ACCESS_ADDR mechanism
> >is not used since no MMIO access to APIC is ever done. Have you tested
> >this with "-cpu modelname,-x2apic" qemu flag?
>
> I used the following commandline to test the patches.
>
> # /usr/libexec/qemu-kvm -m 512M -hda /home/tangchen/xxx.img -enable-kvm -smp
> 2
>
That most likely uses x2apic.

> And I think the guest used APIC_ACCESS_ADDR mechanism because the previous
> patch-set has some problem which will happen when the apic page is accessed.
> And it did happen.
>
> I'll test this patch-set with "-cpu modelname,-x2apic" flag.
>
Replace "modelname" with one of supported model names such as nehalem of course :)

> >
> >>Signed-off-by: Tang Chen<tangchen@xxxxxxxxxxxxxx>
> >>---
> >> arch/x86/include/asm/kvm_host.h | 1 +
> >> arch/x86/kvm/mmu.c | 11 +++++++++++
> >> arch/x86/kvm/svm.c | 6 ++++++
> >> arch/x86/kvm/vmx.c | 8 +++++++-
> >> arch/x86/kvm/x86.c | 14 ++++++++++++++
> >> include/linux/kvm_host.h | 2 ++
> >> virt/kvm/kvm_main.c | 12 ++++++++++++
> >> 7 files changed, 53 insertions(+), 1 deletion(-)
> >>
> >>diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> >>index 62f973e..9ce6bfd 100644
> >>--- a/arch/x86/include/asm/kvm_host.h
> >>+++ b/arch/x86/include/asm/kvm_host.h
> >>@@ -737,6 +737,7 @@ struct kvm_x86_ops {
> >> void (*hwapic_isr_update)(struct kvm *kvm, int isr);
> >> void (*load_eoi_exitmap)(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap);
> >> void (*set_virtual_x2apic_mode)(struct kvm_vcpu *vcpu, bool set);
> >>+ void (*set_apic_access_page_addr)(struct kvm *kvm, hpa_t hpa);
> >> void (*deliver_posted_interrupt)(struct kvm_vcpu *vcpu, int vector);
> >> void (*sync_pir_to_irr)(struct kvm_vcpu *vcpu);
> >> int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
> >>diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
> >>index 9314678..551693d 100644
> >>--- a/arch/x86/kvm/mmu.c
> >>+++ b/arch/x86/kvm/mmu.c
> >>@@ -3427,6 +3427,17 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa, u32 error_code,
> >> level, gfn, pfn, prefault);
> >> spin_unlock(&vcpu->kvm->mmu_lock);
> >>
> >>+ /*
> >>+ * apic access page could be migrated. When the guest tries to access
> >>+ * the apic access page, ept violation will occur, and we can use GUP
> >>+ * to find the new page.
> >>+ *
> >>+ * GUP will wait till the migrate entry be replaced with the new page.
> >>+ */
> >>+ if (gpa == APIC_DEFAULT_PHYS_BASE)
> >>+ vcpu->kvm->arch.apic_access_page = gfn_to_page_no_pin(vcpu->kvm,
> >>+ APIC_DEFAULT_PHYS_BASE>> PAGE_SHIFT);
> >Shouldn't you make KVM_REQ_APIC_PAGE_RELOAD request here?
>
> I don't think we need to make KVM_REQ_APIC_PAGE_RELOAD request here.
>
> In kvm_mmu_notifier_invalidate_page() I made the request. And the handler
> called
> gfn_to_page_no_pin() to get the new page, which will wait till the migration
> finished. And then updated the VMCS APIC_ACCESS_ADDR pointer. So, when the
> vcpus
> were forced to exit the guest mode, they would wait till the VMCS
> APIC_ACCESS_ADDR
> pointer was updated.
>
> As a result, we don't need to make the request here.
OK, I do not see what's the purpose of the code here then.

>
>
> >
> >>+
> >> return r;
> >>
> >> out_unlock:
> >>diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
> >>index 576b525..dc76f29 100644
> >>--- a/arch/x86/kvm/svm.c
> >>+++ b/arch/x86/kvm/svm.c
> >>@@ -3612,6 +3612,11 @@ static void svm_set_virtual_x2apic_mode(struct kvm_vcpu *vcpu, bool set)
> >> return;
> >> }
> >>
> >>+static void svm_set_apic_access_page_addr(struct kvm *kvm, hpa_t hpa)
> >>+{
> >>+ return;
> >>+}
> >>+
> >> static int svm_vm_has_apicv(struct kvm *kvm)
> >> {
> >> return 0;
> >>@@ -4365,6 +4370,7 @@ static struct kvm_x86_ops svm_x86_ops = {
> >> .enable_irq_window = enable_irq_window,
> >> .update_cr8_intercept = update_cr8_intercept,
> >> .set_virtual_x2apic_mode = svm_set_virtual_x2apic_mode,
> >>+ .set_apic_access_page_addr = svm_set_apic_access_page_addr,
> >> .vm_has_apicv = svm_vm_has_apicv,
> >> .load_eoi_exitmap = svm_load_eoi_exitmap,
> >> .hwapic_isr_update = svm_hwapic_isr_update,
> >>diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> >>index 5532ac8..f7c6313 100644
> >>--- a/arch/x86/kvm/vmx.c
> >>+++ b/arch/x86/kvm/vmx.c
> >>@@ -3992,7 +3992,7 @@ static int alloc_apic_access_page(struct kvm *kvm)
> >> if (r)
> >> goto out;
> >>
> >>- page = gfn_to_page(kvm, APIC_DEFAULT_PHYS_BASE>> PAGE_SHIFT);
> >>+ page = gfn_to_page_no_pin(kvm, APIC_DEFAULT_PHYS_BASE>> PAGE_SHIFT);
> >> if (is_error_page(page)) {
> >> r = -EFAULT;
> >> goto out;
> >>@@ -7073,6 +7073,11 @@ static void vmx_set_virtual_x2apic_mode(struct kvm_vcpu *vcpu, bool set)
> >> vmx_set_msr_bitmap(vcpu);
> >> }
> >>
> >>+static void vmx_set_apic_access_page_addr(struct kvm *kvm, hpa_t hpa)
> >>+{
> >>+ vmcs_write64(APIC_ACCESS_ADDR, hpa);
> >>+}
> >>+
> >> static void vmx_hwapic_isr_update(struct kvm *kvm, int isr)
> >> {
> >> u16 status;
> >>@@ -8842,6 +8847,7 @@ static struct kvm_x86_ops vmx_x86_ops = {
> >> .enable_irq_window = enable_irq_window,
> >> .update_cr8_intercept = update_cr8_intercept,
> >> .set_virtual_x2apic_mode = vmx_set_virtual_x2apic_mode,
> >>+ .set_apic_access_page_addr = vmx_set_apic_access_page_addr,
> >> .vm_has_apicv = vmx_vm_has_apicv,
> >> .load_eoi_exitmap = vmx_load_eoi_exitmap,
> >> .hwapic_irr_update = vmx_hwapic_irr_update,
> >>diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> >>index ffbe557..7080eda 100644
> >>--- a/arch/x86/kvm/x86.c
> >>+++ b/arch/x86/kvm/x86.c
> >>@@ -5929,6 +5929,18 @@ static void vcpu_scan_ioapic(struct kvm_vcpu *vcpu)
> >> kvm_apic_update_tmr(vcpu, tmr);
> >> }
> >>
> >>+static void vcpu_reload_apic_access_page(struct kvm_vcpu *vcpu)
> >>+{
> >>+ /*
> >>+ * When the page is being migrated, GUP will wait till the migrate
> >>+ * entry is replaced with the new pte entry pointing to the new page.
> >>+ */
> >>+ struct page *page = gfn_to_page_no_pin(vcpu->kvm,
> >>+ APIC_DEFAULT_PHYS_BASE>> PAGE_SHIFT);
> >If you do not use kvm->arch.apic_access_page to get current address why not drop it entirely?
> >
>
> I should also update kvm->arch.apic_access_page here. It is used in other
> places
> in kvm, so I don't think we should drop it. Will update the patch.
What other places? The only other place I see is in nested kvm code and you can call
gfn_to_page_no_pin() there instead of using kvm->arch.apic_access_page directly. But
as far as I see nested kvm code cannot handle change of APIC_ACCESS_ADDR phys address.
If APIC_ACCESS_ADDR changes during nested guest run, non nested vmcs will still have old
physical address. One way to fix that is to set KVM_REQ_APIC_PAGE_RELOAD during nested exit.

--
Gleb.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/