[PATCH 2/2 v2] efilinux: set ext_ramdisk_* for huge initrd

From: Yinghai Lu
Date: Wed Jun 25 2014 - 17:24:46 EST


We could load it high if it is more than 2G when kernel support
LOAD_ABOVE_4G.

-v2: Use macro instead of (1<<1) directly for LOAD_ABOVE_4G.

Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>

---
loaders/bzimage/bzimage.c | 9 ++++++++-
loaders/bzimage/bzimage.h | 15 +++++++++++++--
2 files changed, 21 insertions(+), 3 deletions(-)

Index: efilinux/loaders/bzimage/bzimage.c
===================================================================
--- efilinux.orig/loaders/bzimage/bzimage.c
+++ efilinux/loaders/bzimage/bzimage.c
@@ -130,7 +130,9 @@ static void parse_initrd(EFI_LOADED_IMAG
if (err != EFI_SUCCESS)
goto close_handles;

- if ((UINTN)addr > boot_params->hdr.ramdisk_max) {
+ if ((boot_params->hdr.version < 0x20c ||
+ !(boot_params->hdr.xloadflags & XLF_CAN_BE_LOADED_ABOVE_4G)) &&
+ (UINTN)addr > boot_params->hdr.ramdisk_max) {
Print(L"ramdisk address is too high!\n");
efree(addr, size);
goto close_handles;
@@ -138,6 +140,11 @@ static void parse_initrd(EFI_LOADED_IMAG

boot_params->hdr.ramdisk_start = (UINT32)(UINTN)addr;
boot_params->hdr.ramdisk_len = (UINT32)size;
+ if (boot_params->hdr.version >= 0x20c &&
+ (boot_params->hdr.xloadflags & XLF_CAN_BE_LOADED_ABOVE_4G)) {
+ boot_params->ext_ramdisk_image = (UINT64)(UINTN)addr >> 32;
+ boot_params->ext_ramdisk_size = size >> 32;
+ }

for (j = 0; j < nr_initrds; j++) {
struct initrd *rd = &initrds[j];
Index: efilinux/loaders/bzimage/bzimage.h
===================================================================
--- efilinux.orig/loaders/bzimage/bzimage.h
+++ efilinux/loaders/bzimage/bzimage.h
@@ -40,6 +40,13 @@
#define E820_NVS 4
#define E820_UNUSABLE 5

+/* xloadflags */
+#define XLF_KERNEL_64 (1<<0)
+#define XLF_CAN_BE_LOADED_ABOVE_4G (1<<1)
+#define XLF_EFI_HANDOVER_32 (1<<2)
+#define XLF_EFI_HANDOVER_64 (1<<3)
+#define XLF_EFI_KEXEC (1<<4)
+
struct setup_header {
UINT8 setup_secs; /* Sectors for setup code */
UINT16 root_flags;
@@ -69,7 +76,8 @@ struct setup_header {
UINT32 ramdisk_max; /* Highest legal initrd address */
UINT32 kernel_alignment; /* Physical addr alignment required for kernel */
UINT8 relocatable_kernel; /* Whether kernel is relocatable or not */
- UINT8 _pad2[3];
+ UINT8 min_alignment;
+ UINT16 xloadflags;
UINT32 cmdline_size;
UINT32 hardware_subarch;
UINT64 hardware_subarch_data;
@@ -148,7 +156,10 @@ struct boot_params {
UINT8 hd1_info[16];
UINT8 sys_desc_table[0x10];
UINT8 olpc_ofw_header[0x10];
- UINT8 _pad4[128];
+ UINT32 ext_ramdisk_image;
+ UINT32 ext_ramdisk_size;
+ UINT32 ext_cmd_line_ptr;
+ UINT8 _pad4[116];
UINT8 edid_info[0x80];
struct efi_info efi_info;
UINT32 alt_mem_k;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/