[PATCH 1/2] documentation: add rockchip spi documentation

From: addy ke
Date: Tue Jun 24 2014 - 00:05:16 EST


Signed-off-by: addy ke <addy.ke@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/spi/spi-rockchip.txt | 51 ++++++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
new file mode 100644
index 0000000..ce9c881
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
@@ -0,0 +1,51 @@
+* Rockchip SPI Controller
+
+The Rockchip SPI controller is used to interface with various devices such as flash
+and display controllers using the SPI communication interface.
+
+Required SoC Specific Properties:
+
+- compatible: should be one of the following.
+ - rockchip,rk3066-spi: for rk3066, rk3188 and rk3288 platforms.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+ depends on the interrupt controller.
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
+ the peripheral clock.
+
+Optional properties:
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "tx" and "rx" if present.
+
+Example:
+
+- SoC Specific Portion:
+
+ spi0: spi@ff110000 {
+ compatible = "rockchip,rockchip-spi";
+ reg = <0xff110000 0x1000>;
+ dmas = <&pdma1 11>, <&pdma1 12>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0 &spi0_cs1>;
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ status = "disabled";
+ };
+
+- Board Specific Portion:
+
+ &spi0 {
+ status = "okay";
+ spi_test@00 {
+ compatible = "rockchip,spi_test";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ };
+ };
--
1.8.3.2


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/