[PATCH 3.15.1] i82975x_edac: fix dram layout inits and style

From: Arvind R
Date: Fri Jun 20 2014 - 11:56:37 EST


Subject: [PATCH 3.15.1] i82975x_edac: fix dram layout inits and style

rewrite dram layout initialisation differently based on symmetry
of organisation. And a long pending cleanup.
Signed-off-by: Arvind R. <arvino55@xxxxxxxxx>
---
i82975x_edac.c | 408 ++++++++++++++++++++++++++++-----------------------------
1 file changed, 207 insertions(+), 201 deletions(-)

--- a/drivers/edac/i82975x_edac.c 2014-06-08 23:49:54.000000000 +0530
+++ b/drivers/edac/i82975x_edac.c 2014-06-20 19:18:28.608312592 +0530
@@ -16,7 +16,7 @@
#include <linux/edac.h>
#include "edac_core.h"

-#define I82975X_REVISION " Ver: 1.0.0"
+#define I82975X_REVISION " Ver: 2.0.1"
#define EDAC_MOD_STR "i82975x_edac"

#define i82975x_printk(level, fmt, arg...) \
@@ -29,8 +29,11 @@
#define PCI_DEVICE_ID_INTEL_82975_0 0x277c
#endif /* PCI_DEVICE_ID_INTEL_82975_0 */

-#define I82975X_NR_DIMMS 8
-#define I82975X_NR_CSROWS(nr_chans) (I82975X_NR_DIMMS / (nr_chans))
+#define I82975X_NR_CHANNELS 2
+#define I82975X_NR_CSROWS_PER_CHANNEL 4
+#define I82975X_NR_CSROWS_PER_DIMM 2
+
+#define I82975X_ECC_GRAIN (1 << 7)

/* Intel 82975X register addresses - device 0 function 0 - DRAM Controller */
#define I82975X_EAP 0x58 /* Dram Error Address Pointer (32b)
@@ -48,7 +51,7 @@
#define I82975X_DES 0x5d /* Dram ERRor DeSTination (8b)
* 0h: Processor Memory Reads
* 1h:7h reserved
- * More - See Page 65 of Intel DocSheet.
+ * More - See Pg.65 of Intel DocSheet.
*/

#define I82975X_ERRSTS 0xc8 /* Error Status Register (16b)
@@ -98,7 +101,7 @@
#define I82975X_XEAP 0xfc /* Extended Dram Error Address Pointer (8b)
*
* 7:1 reserved
- * 0 Bit32 of the Dram Error Address
+ * 0 Bit32 of Dram Error Address
*/

#define I82975X_MCHBAR 0x44 /*
@@ -167,7 +170,8 @@
#define I82975X_C0BNKARC 0x10e
#define I82975X_C1BNKARC 0x18e

-
+#define I82975X_C0DRT1 0x114
+#define I82975X_C1DRT1 0x194

#define I82975X_DRC 0x120 /* DRAM Controller Mode0 (32b)
*
@@ -202,12 +206,16 @@
#define I82975X_DRC_CH0M1 0x124
#define I82975X_DRC_CH1M1 0x1A4

+#define I82975X_BIT_ERROR_CE 0x01
+#define I82975X_BIT_ERROR_UE 0x02
+#define I82975X_BITS_ERROR 0x03
+
enum i82975x_chips {
- I82975X = 0,
+ I82975X_chip = 0,
};

struct i82975x_pvt {
- void __iomem *mch_window;
+ enum i82975x_chips chip;
};

struct i82975x_dev_info {
@@ -225,7 +233,7 @@
};

static const struct i82975x_dev_info i82975x_devs[] = {
- [I82975X] = {
+ [I82975X_chip] = {
.ctl_name = "i82975x"
},
};
@@ -236,7 +244,7 @@

static int i82975x_registered = 1;

-static void i82975x_get_error_info(struct mem_ctl_info *mci,
+static bool i82975x_get_error_info(struct mem_ctl_info *mci,
struct i82975x_error_info *info)
{
struct pci_dev *pdev;
@@ -255,7 +263,8 @@
pci_read_config_byte(pdev, I82975X_DERRSYN, &info->derrsyn);
pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts2);

- pci_write_bits16(pdev, I82975X_ERRSTS, 0x0003, 0x0003);
+ pci_write_bits16(pdev, I82975X_ERRSTS, I82975X_BITS_ERROR,
+ I82975X_BITS_ERROR);

/*
* If the error is the same then we can for both reads then
@@ -263,31 +272,30 @@
* there is a CE no info and the second set of reads is valid
* and should be UE info.
*/
- if (!(info->errsts2 & 0x0003))
- return;
+ if (!(info->errsts2 & I82975X_BITS_ERROR))
+ return false;

- if ((info->errsts ^ info->errsts2) & 0x0003) {
+ if ((info->errsts ^ info->errsts2) & I82975X_BITS_ERROR) {
pci_read_config_dword(pdev, I82975X_EAP, &info->eap);
pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap);
pci_read_config_byte(pdev, I82975X_DES, &info->des);
pci_read_config_byte(pdev, I82975X_DERRSYN,
&info->derrsyn);
}
+ return true;
}

static int i82975x_process_error_info(struct mem_ctl_info *mci,
struct i82975x_error_info *info, int handle_errors)
{
+ enum hw_event_mc_err_type err_type;
int row, chan;
unsigned long offst, page;

- if (!(info->errsts2 & 0x0003))
- return 0;
-
if (!handle_errors)
return 1;

- if ((info->errsts ^ info->errsts2) & 0x0003) {
+ if ((info->errsts ^ info->errsts2) & I82975X_BITS_ERROR) {
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
-1, -1, -1, "UE overwrote CE", "");
info->errsts = info->errsts2;
@@ -299,30 +307,15 @@
page |= 0x80000000;
page >>= (PAGE_SHIFT - 1);
row = edac_mc_find_csrow_by_page(mci, page);
+ chan = (mci->num_cschannel == 1 ? 0 : (info->eap & 1));
+ offst = info->eap & ((1 << PAGE_SHIFT) - I82975X_ECC_GRAIN);

- if (row == -1) {
- i82975x_mc_printk(mci, KERN_ERR, "error processing EAP:\n"
- "\tXEAP=%u\n"
- "\t EAP=0x%08x\n"
- "\tPAGE=0x%08x\n",
- (info->xeap & 1) ? 1 : 0, info->eap, (unsigned int) page);
- return 0;
- }
- chan = (mci->csrows[row]->nr_channels == 1) ? 0 : info->eap & 1;
- offst = info->eap
- & ((1 << PAGE_SHIFT) -
- (1 << mci->csrows[row]->channels[chan]->dimm->grain));
-
- if (info->errsts & 0x0002)
- edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
- page, offst, 0,
- row, -1, -1,
- "i82975x UE", "");
- else
- edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+ err_type = (info->errsts & I82975X_BIT_ERROR_UE) ?
+ HW_EVENT_ERR_UNCORRECTED : HW_EVENT_ERR_CORRECTED;
+ edac_mc_handle_error(err_type, mci, 1,
page, offst, info->derrsyn,
- row, chan ? chan : 0, -1,
- "i82975x CE", "");
+ row, chan, -1,
+ "i82975x", "");

return 1;
}
@@ -331,52 +324,20 @@
{
struct i82975x_error_info info;

- edac_dbg(1, "MC%d\n", mci->mc_idx);
- i82975x_get_error_info(mci, &info);
- i82975x_process_error_info(mci, &info, 1);
-}
-
-/* Return 1 if dual channel mode is active. Else return 0. */
-static int dual_channel_active(void __iomem *mch_window)
-{
- /*
- * We treat interleaved-symmetric configuration as dual-channel - EAP's
- * bit-0 giving the channel of the error location.
- *
- * All other configurations are treated as single channel - the EAP's
- * bit-0 will resolve ok in symmetric area of mixed
- * (symmetric/asymmetric) configurations
- */
- u8 drb[4][2];
- int row;
- int dualch;
-
- for (dualch = 1, row = 0; dualch && (row < 4); row++) {
- drb[row][0] = readb(mch_window + I82975X_DRB + row);
- drb[row][1] = readb(mch_window + I82975X_DRB + row + 0x80);
- dualch = dualch && (drb[row][0] == drb[row][1]);
- }
- return dualch;
-}
-
-static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank)
-{
- /*
- * ECC is possible on i92975x ONLY with DEV_X8
- */
- return DEV_X8;
+ edac_dbg(4, "MC%d\n", mci->mc_idx);
+ if (i82975x_get_error_info(mci, &info))
+ i82975x_process_error_info(mci, &info, 1);
}

static void i82975x_init_csrows(struct mem_ctl_info *mci,
- struct pci_dev *pdev, void __iomem *mch_window)
+ void __iomem *mch_window, bool is_symmetric)
{
struct csrow_info *csrow;
unsigned long last_cumul_size;
u8 value;
u32 cumul_size, nr_pages;
- int index, chan;
+ unsigned index, chan, asym_index, asym_offst;
struct dimm_info *dimm;
- enum dev_type dtype;

last_cumul_size = 0;

@@ -389,73 +350,149 @@
*
*/

- for (index = 0; index < mci->nr_csrows; index++) {
+ for (index = 0; index < I82975X_NR_CSROWS_PER_CHANNEL; index++) {
csrow = mci->csrows[index];
-
- value = readb(mch_window + I82975X_DRB + index +
- ((index >= 4) ? 0x80 : 0));
- cumul_size = value;
+ if (is_symmetric) {
+ value = readb(mch_window + I82975X_DRB + index);
+ cumul_size = (((u32) value) << 1);
+ } else {
+ asym_index = index * I82975X_NR_CSROWS_PER_DIMM;
+ asym_offst = 0;
+ if (asym_index >= I82975X_NR_CSROWS_PER_CHANNEL) {
+ asym_index -= I82975X_NR_CSROWS_PER_CHANNEL;
+ asym_offst = 0x80;
+ }
+ /* Values are cumulative, so read last reg. of rank */
+ value = readb(mch_window + I82975X_DRB + asym_index
+ + asym_offst
+ + (I82975X_NR_CSROWS_PER_DIMM - 1));
+ cumul_size = value;
+ }
cumul_size <<= (I82975X_DRB_SHIFT - PAGE_SHIFT);
- /*
- * Adjust cumul_size w.r.t number of channels
- *
- */
- if (csrow->nr_channels > 1)
- cumul_size <<= 1;
edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size);

nr_pages = cumul_size - last_cumul_size;
if (!nr_pages)
continue;

- /*
- * Initialise dram labels
- * index values:
- * [0-7] for single-channel; i.e. csrow->nr_channels = 1
- * [0-3] for dual-channel; i.e. csrow->nr_channels = 2
- */
- dtype = i82975x_dram_type(mch_window, index);
- for (chan = 0; chan < csrow->nr_channels; chan++) {
- dimm = mci->csrows[index]->channels[chan]->dimm;
-
- dimm->nr_pages = nr_pages / csrow->nr_channels;
-
- snprintf(csrow->channels[chan]->dimm->label, EDAC_MC_LABEL_LEN, "DIMM %c%d",
- (chan == 0) ? 'A' : 'B',
- index);
- dimm->grain = 1 << 7; /* 128Byte cache-line resolution */
- dimm->dtype = i82975x_dram_type(mch_window, index);
- dimm->mtype = MEM_DDR2; /* I82975x supports only DDR2 */
- dimm->edac_mode = EDAC_SECDED; /* only supported */
- }
-
csrow->first_page = last_cumul_size;
csrow->last_page = cumul_size - 1;
last_cumul_size = cumul_size;
+
+ /*
+ * Initialise dram labels
+ */
+ if (is_symmetric) {
+ for (chan = 0; chan < I82975X_NR_CHANNELS; chan++) {
+ dimm = csrow->channels[chan]->dimm;
+ dimm->nr_pages = nr_pages / I82975X_NR_CHANNELS;
+ snprintf(dimm->label, EDAC_MC_LABEL_LEN,
+ "DIMM %c%d", chan + 'A',
+ ((index / I82975X_NR_CSROWS_PER_DIMM)
+ + 1));
+ }
+ } else {
+ dimm = mci->dimms[index];
+ dimm->nr_pages = nr_pages;
+ snprintf(dimm->label,
+ EDAC_MC_LABEL_LEN, "DIMM %c%d",
+ ((index / 2) + 'A'),
+ ((index % 2) + 1));
+ }
+ dimm->grain = I82975X_ECC_GRAIN; /* always */
+ dimm->dtype = DEV_X8; /* only with ECC */
+ dimm->mtype = MEM_DDR2; /* only supported */
+ dimm->edac_mode = EDAC_SECDED; /* only supported */
}
}

-/* #define i82975x_DEBUG_IOMEM */
-
-#ifdef i82975x_DEBUG_IOMEM
-static void i82975x_print_dram_timings(void __iomem *mch_window)
-{
- /*
- * The register meanings are from Intel specs;
- * (shows 13-5-5-5 for 800-DDR2)
- * Asus P5W Bios reports 15-5-4-4
- * What's your religion?
- */
+#ifdef CONFIG_EDAC_DEBUG
+static void i82975x_print_dram_settings(void __iomem *mch_window,
+ u32 mchbar, u32 *drc, bool is_symmetric)
+{
+ static const char *refresh_modes[8] = {
+ "disabled",
+ "15.6 uSec", "7.8 uSec", "3.9 uSec", "1.95 uSec",
+ "reserved", "reserved",
+ "fast refresh (64 clocks)"
+ };
+ static const char *rank_attr[8] = {
+ "empty ", "reserved",
+ "4 Kb ", "8 Kb ", "16 Kb ",
+ "reserved", "reserved", "reserved"
+ };
static const int caslats[4] = { 5, 4, 3, 6 };
u32 dtreg[2];
+ u8 drb[4];
+ u8 dra[2][2];
+
+ /* Show memory config if debug level is 1 or upper */
+ if (!edac_debug_level)
+ return;
+
+ i82975x_printk(KERN_INFO, "MCHBAR real = %0x, remapped = %p\n",
+ mchbar, mch_window);
+
+ drb[0] = readb(mch_window + I82975X_DRB_CH0R0);
+ drb[1] = readb(mch_window + I82975X_DRB_CH0R1);
+ drb[2] = readb(mch_window + I82975X_DRB_CH0R2);
+ drb[3] = readb(mch_window + I82975X_DRB_CH0R3);
+ i82975x_printk(KERN_INFO, "DRBCH0R0 = 0x%02x\n", drb[0]);
+ i82975x_printk(KERN_INFO, "DRBCH0R1 = 0x%02x\n", drb[1]);
+ i82975x_printk(KERN_INFO, "DRBCH0R2 = 0x%02x\n", drb[2]);
+ i82975x_printk(KERN_INFO, "DRBCH0R3 = 0x%02x\n\n", drb[3]);
+ drb[0] = readb(mch_window + I82975X_DRB_CH1R0);
+ drb[1] = readb(mch_window + I82975X_DRB_CH1R1);
+ drb[2] = readb(mch_window + I82975X_DRB_CH1R2);
+ drb[3] = readb(mch_window + I82975X_DRB_CH1R3);
+ i82975x_printk(KERN_INFO, "DRBCH1R0 = 0x%02x\n", drb[0]);
+ i82975x_printk(KERN_INFO, "DRBCH1R1 = 0x%02x\n", drb[1]);
+ i82975x_printk(KERN_INFO, "DRBCH1R2 = 0x%02x\n", drb[2]);
+ i82975x_printk(KERN_INFO, "DRBCH1R3 = 0x%02x\n", drb[3]);
+ i82975x_printk(KERN_INFO, "Memory in %ssymmetric mode\n",
+ is_symmetric ? "" : "as");

- dtreg[0] = readl(mch_window + 0x114);
- dtreg[1] = readl(mch_window + 0x194);
+ i82975x_printk(KERN_INFO, "DRC_CH0 = %0x, %s\n", drc[0],
+ ((drc[0] >> 21) & 3) == 1 ?
+ "ECC enabled" : "ECC disabled");
+ i82975x_printk(KERN_INFO, "DRC_CH1 = %0x, %s\n", drc[1],
+ ((drc[1] >> 21) & 3) == 1 ?
+ "ECC enabled" : "ECC disabled");
+
+ dra[0][0] = readb(mch_window + I82975X_DRA_CH0R01);
+ dra[0][1] = readb(mch_window + I82975X_DRA_CH0R23);
+ dra[1][0] = readb(mch_window + I82975X_DRA_CH1R01);
+ dra[1][1] = readb(mch_window + I82975X_DRA_CH1R23);
+ i82975x_printk(KERN_INFO, "Rank Attribute:\n"
+ " Rank: 0 1 2 3\n"
+ " Ch0: %s %s %s %s\n"
+ " Ch1: %s %s %s %s\n",
+ rank_attr[dra[0][0] & 7],
+ rank_attr[(dra[0][0] >> 4) & 7],
+ rank_attr[dra[0][1] & 7],
+ rank_attr[(dra[0][1] >> 4) & 7],
+ rank_attr[dra[1][0] & 7],
+ rank_attr[(dra[1][0] >> 4) & 7],
+ rank_attr[dra[1][1] & 7],
+ rank_attr[(dra[1][1] >> 4) & 7]);
+
+ i82975x_printk(KERN_INFO, "Bank Architecture:\n"
+ " 2 bits / rank, 0 => 4 banks, 1 => 8 banks\n"
+ " Channel A: %02x B: %02x\n",
+ readw(mch_window + I82975X_C0BNKARC),
+ readw(mch_window + I82975X_C1BNKARC));
+
+ i82975x_printk(KERN_INFO, "Memory Refresh: Ch0: %s, Ch1: %s\n",
+ refresh_modes[(drc[0] >> 8) & 7],
+ refresh_modes[(drc[1] >> 8) & 7]);
+
+ dtreg[0] = readl(mch_window + I82975X_C0DRT1);
+ dtreg[1] = readl(mch_window + I82975X_C1DRT1);
i82975x_printk(KERN_INFO, "DRAM Timings : Ch0 Ch1\n"
- " RAS Active Min = %d %d\n"
+ " RAS Active Min = %d %d\n"
" CAS latency = %d %d\n"
- " RAS to CAS = %d %d\n"
- " RAS precharge = %d %d\n",
+ " RAS to CAS = %d %d (2-6 valid)\n"
+ " RAS precharge = %d %d (2-6 valid)\n",
(dtreg[0] >> 19 ) & 0x0f,
(dtreg[1] >> 19) & 0x0f,
caslats[(dtreg[0] >> 8) & 0x03],
@@ -469,6 +506,27 @@
}
#endif

+/* Return 1 if symmetric mode is active. Else return 0. */
+static bool symmetric_channel_mode(void __iomem *mch_window)
+{
+ /*
+ * We treat interleaved-symmetric configuration as dual-channel.
+ * All other configurations are virtual single channel mode.
+ * bit-0 of EAP always provides the real channel in error.
+ */
+ u8 drb[2];
+ int row;
+ bool is_symmetric;
+
+ for (is_symmetric = 1, row = 0; is_symmetric &&
+ (row < I82975X_NR_CSROWS_PER_CHANNEL); row++) {
+ drb[0] = readb(mch_window + I82975X_DRB + row);
+ drb[1] = readb(mch_window + I82975X_DRB + row + 0x80);
+ is_symmetric &= (drb[0] == drb[1]);
+ }
+ return is_symmetric;
+}
+
static int i82975x_probe1(struct pci_dev *pdev, int dev_idx)
{
int rc = -ENODEV;
@@ -479,82 +537,47 @@
u32 mchbar;
u32 drc[2];
struct i82975x_error_info discard;
- int chans;
-#ifdef i82975x_DEBUG_IOMEM
- u8 c0drb[4];
- u8 c1drb[4];
-#endif
+ bool is_symmetric_mode;

- edac_dbg(0, "\n");
+ edac_dbg(0, "MC%d probe\n", dev_idx);

pci_read_config_dword(pdev, I82975X_MCHBAR, &mchbar);
if (!(mchbar & 1)) {
- edac_dbg(3, "failed, MCHBAR disabled!\n");
+ edac_dbg(0, "MC%d MCHBAR disabled!\n", dev_idx);
goto fail0;
}
mchbar &= 0xffffc000; /* bits 31:14 used for 16K window */
mch_window = ioremap_nocache(mchbar, 0x1000);

-#ifdef i82975x_DEBUG_IOMEM
- i82975x_printk(KERN_INFO, "MCHBAR real = %0x, remapped = %p\n",
- mchbar, mch_window);
-
- c0drb[0] = readb(mch_window + I82975X_DRB_CH0R0);
- c0drb[1] = readb(mch_window + I82975X_DRB_CH0R1);
- c0drb[2] = readb(mch_window + I82975X_DRB_CH0R2);
- c0drb[3] = readb(mch_window + I82975X_DRB_CH0R3);
- c1drb[0] = readb(mch_window + I82975X_DRB_CH1R0);
- c1drb[1] = readb(mch_window + I82975X_DRB_CH1R1);
- c1drb[2] = readb(mch_window + I82975X_DRB_CH1R2);
- c1drb[3] = readb(mch_window + I82975X_DRB_CH1R3);
- i82975x_printk(KERN_INFO, "DRBCH0R0 = 0x%02x\n", c0drb[0]);
- i82975x_printk(KERN_INFO, "DRBCH0R1 = 0x%02x\n", c0drb[1]);
- i82975x_printk(KERN_INFO, "DRBCH0R2 = 0x%02x\n", c0drb[2]);
- i82975x_printk(KERN_INFO, "DRBCH0R3 = 0x%02x\n", c0drb[3]);
- i82975x_printk(KERN_INFO, "DRBCH1R0 = 0x%02x\n", c1drb[0]);
- i82975x_printk(KERN_INFO, "DRBCH1R1 = 0x%02x\n", c1drb[1]);
- i82975x_printk(KERN_INFO, "DRBCH1R2 = 0x%02x\n", c1drb[2]);
- i82975x_printk(KERN_INFO, "DRBCH1R3 = 0x%02x\n", c1drb[3]);
-#endif
-
drc[0] = readl(mch_window + I82975X_DRC_CH0M0);
drc[1] = readl(mch_window + I82975X_DRC_CH1M0);
-#ifdef i82975x_DEBUG_IOMEM
- i82975x_printk(KERN_INFO, "DRC_CH0 = %0x, %s\n", drc[0],
- ((drc[0] >> 21) & 3) == 1 ?
- "ECC enabled" : "ECC disabled");
- i82975x_printk(KERN_INFO, "DRC_CH1 = %0x, %s\n", drc[1],
- ((drc[1] >> 21) & 3) == 1 ?
- "ECC enabled" : "ECC disabled");
-
- i82975x_printk(KERN_INFO, "C0 BNKARC = %0x\n",
- readw(mch_window + I82975X_C0BNKARC));
- i82975x_printk(KERN_INFO, "C1 BNKARC = %0x\n",
- readw(mch_window + I82975X_C1BNKARC));
- i82975x_print_dram_timings(mch_window);
- goto fail1;
+ is_symmetric_mode = symmetric_channel_mode(mch_window);
+#ifdef CONFIG_EDAC_DEBUG
+ i82975x_print_dram_settings(mch_window, mchbar, drc,
+ is_symmetric_mode);
#endif
+
+ /* Obey BIOS setting for enabling ECC */
+ /* FIXME: what about partial setting? possible in BIOS? */
if (!(((drc[0] >> 21) & 3) == 1 || ((drc[1] >> 21) & 3) == 1)) {
i82975x_printk(KERN_INFO, "ECC disabled on both channels.\n");
goto fail1;
}

- chans = dual_channel_active(mch_window) + 1;
-
- /* assuming only one controller, index thus is 0 */
layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
- layers[0].size = I82975X_NR_DIMMS;
+ layers[0].size = I82975X_NR_CSROWS_PER_CHANNEL;
layers[0].is_virt_csrow = true;
layers[1].type = EDAC_MC_LAYER_CHANNEL;
- layers[1].size = I82975X_NR_CSROWS(chans);
+ layers[1].size = I82975X_NR_CHANNELS;
layers[1].is_virt_csrow = false;
- mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
+ /* assuming only one controller, controller index is 0 */
+ mci = edac_mc_alloc(0, is_symmetric_mode + 1, layers, sizeof(*pvt));
if (!mci) {
+ edac_dbg(0, "MC%d failed mc_alloc\n", dev_idx);
rc = -ENOMEM;
goto fail1;
}

- edac_dbg(3, "init mci\n");
mci->pdev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR2;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
@@ -565,25 +588,22 @@
mci->dev_name = pci_name(pdev);
mci->edac_check = i82975x_check;
mci->ctl_page_to_phys = NULL;
- edac_dbg(3, "init pvt\n");
pvt = (struct i82975x_pvt *) mci->pvt_info;
- pvt->mch_window = mch_window;
- i82975x_init_csrows(mci, pdev, mch_window);
- mci->scrub_mode = SCRUB_HW_SRC;
+ pvt->chip = dev_idx;
+ i82975x_init_csrows(mci, mch_window, is_symmetric_mode);
+ mci->scrub_mode = SCRUB_SW_SRC;
i82975x_get_error_info(mci, &discard); /* clear counters */

/* finalize this instance of memory controller with edac core */
if (edac_mc_add_mc(mci)) {
- edac_dbg(3, "failed edac_mc_add_mc()\n");
- goto fail2;
+ edac_dbg(0, "MC%d failed add_mc()\n", dev_idx);
+ edac_mc_free(mci);
+ goto fail1;
}

/* get this far and it's successful */
- edac_dbg(3, "success\n");
- return 0;
-
-fail2:
- edac_mc_free(mci);
+ edac_dbg(3, "MC%d setup with driver%s\n", dev_idx, I82975X_REVISION);
+ rc = 0;

fail1:
iounmap(mch_window);
@@ -597,8 +617,6 @@
{
int rc;

- edac_dbg(0, "\n");
-
if (pci_enable_device(pdev) < 0)
return -EIO;

@@ -613,25 +631,17 @@
static void i82975x_remove_one(struct pci_dev *pdev)
{
struct mem_ctl_info *mci;
- struct i82975x_pvt *pvt;
-
- edac_dbg(0, "\n");

mci = edac_mc_del_mc(&pdev->dev);
if (mci == NULL)
return;
-
- pvt = mci->pvt_info;
- if (pvt->mch_window)
- iounmap( pvt->mch_window );
-
edac_mc_free(mci);
}

static const struct pci_device_id i82975x_pci_tbl[] = {
{
PCI_VEND_DEV(INTEL, 82975_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- I82975X
+ I82975X_chip
},
{
0,
@@ -651,8 +661,6 @@
{
int pci_rc;

- edac_dbg(3, "\n");
-
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();

@@ -693,8 +701,6 @@

static void __exit i82975x_exit(void)
{
- edac_dbg(3, "\n");
-
pci_unregister_driver(&i82975x_driver);

if (!i82975x_registered) {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/