Re: [usb resume regression] in 3.16-rc1

[Alan Stern]

On Thu, 19 Jun 2014, JÃrg Otte wrote:

> on resume with 3.16-rc1 I get the following error messages in dmesg
> which are alltogether not present in 3.15:
> 
> [   43.518116] dpm_run_callback(): 0xffffffffa53c4120 returns -13
> [   43.518119] PM: Device 1-1 failed to resume async: error -13
> [   43.522380] hub 1-1:1.0: hub_port_status failed (err = -71)
> [   43.528538] sd 0:0:0:0: [sda] Starting disk
> [   43.530886] hub 1-1:1.0: hub_port_status failed (err = -71)
> [   43.535140] usb 1-1-port2: cannot disable (err = -71)
> [   43.535142] dpm_run_callback(): 0xffffffffa53c4120 returns -71
> [   43.535145] PM: Device 1-1.2 failed to resume async: error -71
> [   43.543673] usb 1-1-port4: cannot disable (err = -71)
> [   43.543674] dpm_run_callback(): 0xffffffffa53c4120 returns -71
> [   43.543679] PM: Device 1-1.4 failed to resume async: error -71
> 
> usb devices connected to the hub (in my case mouse and keyboard) are
> all death after resume and cannot be activated again.

-13 is -EACCES.  It's not clear what could have caused that error, 
since EACCES isn't used in the USB core or in ehci-hcd.

Can you try doing the same thing after enabling dynamic debugging in 
usbcore and ehci-hcd?

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/