RE: [PATCH] vfio: Fix endianness handling for emulated BARs

From: Bharat.Bhushan@xxxxxxxxxxxxx
Date: Thu Jun 19 2014 - 01:31:09 EST




> -----Original Message-----
> From: Linuxppc-dev [mailto:linuxppc-dev-
> bounces+bharat.bhushan=freescale.com@xxxxxxxxxxxxxxxx] On Behalf Of Alexey
> Kardashevskiy
> Sent: Thursday, June 19, 2014 9:18 AM
> To: Alex Williamson
> Cc: kvm@xxxxxxxxxxxxxxx; Nikunj A Dadhania; linux-kernel@xxxxxxxxxxxxxxx;
> Alexander Graf; linuxppc-dev@xxxxxxxxxxxxxxxx
> Subject: Re: [PATCH] vfio: Fix endianness handling for emulated BARs
>
> On 06/19/2014 11:50 AM, Alexey Kardashevskiy wrote:
> > On 06/19/2014 10:50 AM, Alexey Kardashevskiy wrote:
> >> On 06/19/2014 04:35 AM, Alex Williamson wrote:
> >>> On Wed, 2014-06-18 at 21:36 +1000, Alexey Kardashevskiy wrote:
> >>>> VFIO exposes BARs to user space as a byte stream so userspace can
> >>>> read it using pread()/pwrite(). Since this is a byte stream, VFIO
> >>>> should not do byte swapping and simply return values as it gets
> >>>> them from PCI device.
> >>>>
> >>>> Instead, the existing code assumes that byte stream in read/write
> >>>> is little-endian and it fixes endianness for values which it passes
> >>>> to ioreadXX/iowriteXX helpers. This works for little-endian as PCI
> >>>> is little endian and le32_to_cpu/... are stubs.
> >>>
> >>> vfio read32:
> >>>
> >>> val = cpu_to_le32(ioread32(io + off));
> >>>
> >>> Where the typical x86 case, ioread32 is:
> >>>
> >>> #define ioread32(addr) readl(addr)
> >>>
> >>> and readl is:
> >>>
> >>> __le32_to_cpu(__raw_readl(addr));
> >>>
> >>> So we do canceling byte swaps, which are both nops on x86, and end
> >>> up returning device endian, which we assume is little endian.
> >>>
> >>> vfio write32 is similar:
> >>>
> >>> iowrite32(le32_to_cpu(val), io + off);
> >>>
> >>> The implicit cpu_to_le32 of iowrite32() and our explicit swap cancel
> >>> out, so input data is device endian, which is assumed little.
> >>>
> >>>> This also works for big endian but rather by an accident: it reads
> >>>> 4 bytes from the stream (@val is big endian), converts to CPU
> >>>> format (which should be big endian) as it was little endian (@val
> >>>> becomes actually little
> >>>> endian) and calls iowrite32() which does not do swapping on big
> >>>> endian system.
> >>>
> >>> Really?
> >>>
> >>> In arch/powerpc/kernel/iomap.c iowrite32() is just a wrapper around
> >>> writel(), which seems to use the generic implementation, which does
> >>> include a cpu_to_le32.
> >>
> >>
> >> Ouch, wrong comment. iowrite32() does swapping. My bad.
> >>
> >>
> >>>
> >>> I also see other big endian archs like parisc doing cpu_to_le32 on
> >>> iowrite32, so I don't think this statement is true. I imagine it's
> >>> probably working for you because the swap cancel.
> >>>
> >>>> This removes byte swapping and makes use ioread32be/iowrite32be
> >>>> (and 16bit versions) on big-endian systems. The "be" helpers take
> >>>> native endian values and do swapping at the moment of writing to a
> >>>> PCI register using one of "store byte-reversed" instructions.
> >>>
> >>> So now you want iowrite32() on little endian and iowrite32be() on
> >>> big endian, the former does a cpu_to_le32 (which is a nop on little
> >>> endian) and the latter does a cpu_to_be32 (which is a nop on big endian)...
> >>> should we just be using __raw_writel() on both?
> >>
> >>
> >> We can do that too. The beauty of iowrite32be on ppc64 is that it
> >> does not swap and write separately, it is implemented via the "Store
> >> Word Byte-Reverse Indexed X-form" single instruction.
> >>
> >> And some archs (do not know which ones) may add memory barriers in
> >> their implementations of ioread/iowrite. __raw_writel is too raw :)
> >>
> >>> There doesn't actually
> >>> seem to be any change in behavior here, it just eliminates
> >>> back-to-back byte swaps, which are a nop on x86, but not power, right?
> >>
> >> Exactly. No dependency for QEMU.
> >
> > How about that:
> > ===
> >
> > VFIO exposes BARs to user space as a byte stream so userspace can read
> > it using pread()/pwrite(). Since this is a byte stream, VFIO should
> > not do byte swapping and simply return values as it gets them from PCI
> > device.
> >
> > Instead, the existing code assumes that byte stream in read/write is
> > little-endian and it fixes endianness for values which it passes to
> > ioreadXX/iowriteXX helpers in native format. The IO helpers do
> > swapping again. Since both byte swaps are nops on little-endian host, this
> works.
> >
> > This also works for big endian but rather by an accident: it reads 4
> > bytes from the stream (@val is big endian), converts to CPU format
> > (which should be big endian) as it was little endian (and @val becomes
> > actually little
> > endian) and calls iowrite32() which does swapping on big endian system
> > again. So byte swap gets cancelled, __raw_writel() receives a native
> > value and then *(volatile unsigned int __force *)PCI_FIX_ADDR(addr) =
> > v; just does the right thing.
>
> I am wrong here, sorry. This is what happens when you watch soccer between 2am
> and 4am :)
>
>
> >
> > This removes byte swaps and makes use of ioread32be/iowrite32be (and
> > 16bit versions) which do explicit byte swapping at the moment of write
> > to a PCI register. PPC64 uses a special "Store Word Byte-Reverse
> > Indexed X-form" instruction which does swap and store.
>
> No swapping is done here if we use ioread32be as it calls in_be32 and that
> animal does "lwz" which is simple load from memory.
>
> So @val (16/32 bit variable on stack) will have different values on LE and BE
> but since we do not handle it the host and just memcpy it to the buffer, nothing
> breaks here.
>
>
> So it should be like this:
> ===
> VFIO exposes BARs to user space as a byte stream so userspace can read it using
> pread()/pwrite(). Since this is a byte stream, VFIO should not do byte swapping
> and simply return values as it gets them from PCI device and copy_to_user will
> save bytes in the correct same true for writes.

" copy_to_user will save bytes in the correct" ---? --- "same true for writes".

Thanks
-Bharat

>
> Instead, the existing code assumes that byte stream in read/write is little-
> endian and it fixes endianness for values which it passes to ioreadXX/iowriteXX
> helpers in native format. The IO helpers do swapping again. Since both byte
> swaps are nops on little-endian host, this works.

>
> This also works for big endian but rather by an accident: it reads 4 bytes from
> the stream (@val is big endian), converts to CPU format (which should be big
> endian) as it was little endian (and @val becomes actually little
> endian) and calls iowrite32() which does swapping on big endian system again. So
> byte swap in the host gets cancelled and __raw_writel() writes the value which
> was swapped originally by the guest.
>
> This removes byte swaps and makes use of ioread32be/iowrite32be (and 16bit
> versions) which do not do byte swap on BE hosts.
> For LE hosts, ioread32/iowrite32 are still used.
>
> ===
>
>
> > ===
> >
> > any better?
> >
> >
> >
> >
> >>>> Suggested-by: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
> >>>> Signed-off-by: Alexey Kardashevskiy <aik@xxxxxxxxx>
> >>>> ---
> >>>> drivers/vfio/pci/vfio_pci_rdwr.c | 20 ++++++++++++++++----
> >>>> 1 file changed, 16 insertions(+), 4 deletions(-)
> >>>>
> >>>> diff --git a/drivers/vfio/pci/vfio_pci_rdwr.c
> >>>> b/drivers/vfio/pci/vfio_pci_rdwr.c
> >>>> index 210db24..f363b5a 100644
> >>>> --- a/drivers/vfio/pci/vfio_pci_rdwr.c
> >>>> +++ b/drivers/vfio/pci/vfio_pci_rdwr.c
> >>>> @@ -21,6 +21,18 @@
> >>>>
> >>>> #include "vfio_pci_private.h"
> >>>>
> >>>> +#ifdef __BIG_ENDIAN__
> >>>> +#define ioread16_native ioread16be
> >>>> +#define ioread32_native ioread32be
> >>>> +#define iowrite16_native iowrite16be
> >>>> +#define iowrite32_native iowrite32be
> >>>> +#else
> >>>> +#define ioread16_native ioread16
> >>>> +#define ioread32_native ioread32
> >>>> +#define iowrite16_native iowrite16
> >>>> +#define iowrite32_native iowrite32
> >>>> +#endif
> >>>> +
> >>>> /*
> >>>> * Read or write from an __iomem region (MMIO or I/O port) with an
> excluded
> >>>> * range which is inaccessible. The excluded range drops writes
> >>>> and fills @@ -50,9 +62,9 @@ static ssize_t do_io_rw(void __iomem *io, char
> __user *buf,
> >>>> if (copy_from_user(&val, buf, 4))
> >>>> return -EFAULT;
> >>>>
> >>>> - iowrite32(le32_to_cpu(val), io + off);
> >>>> + iowrite32_native(val, io + off);
> >>>> } else {
> >>>> - val = cpu_to_le32(ioread32(io + off));
> >>>> + val = ioread32_native(io + off);
> >>>>
> >>>> if (copy_to_user(buf, &val, 4))
> >>>> return -EFAULT;
> >>>> @@ -66,9 +78,9 @@ static ssize_t do_io_rw(void __iomem *io, char __user
> *buf,
> >>>> if (copy_from_user(&val, buf, 2))
> >>>> return -EFAULT;
> >>>>
> >>>> - iowrite16(le16_to_cpu(val), io + off);
> >>>> + iowrite16_native(val, io + off);
> >>>> } else {
> >>>> - val = cpu_to_le16(ioread16(io + off));
> >>>> + val = ioread16_native(io + off);
> >>>>
> >>>> if (copy_to_user(buf, &val, 2))
> >>>> return -EFAULT;
> >>>
> >>>
> >>>
> >>
> >>
> >
> >
>
>
> --
> Alexey
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@xxxxxxxxxxxxxxxx
> https://lists.ozlabs.org/listinfo/linuxppc-dev