[PATCH 1/2] Documentation: Document Hisilicon hix5hd2 sata PHY

From: Zhangfei Gao
Date: Tue Jun 17 2014 - 03:58:20 EST


From: Jiancheng Xue <xuejiancheng@xxxxxxxxxx>

Add necessary binding documentation SATA PHY on Hisilicon hix5hd2 soc.

Signed-off-by: Jiancheng Xue <xuejiancheng@xxxxxxxxxx>
Signed-off-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
---
.../devicetree/bindings/phy/hix5hd2-sata-phy.txt | 26 ++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/hix5hd2-sata-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/hix5hd2-sata-phy.txt b/Documentation/devicetree/bindings/phy/hix5hd2-sata-phy.txt
new file mode 100644
index 0000000..ed15123
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/hix5hd2-sata-phy.txt
@@ -0,0 +1,26 @@
+Hisilicon hix5hd2 SATA PHY
+-----------------------
+
+Required properties:
+- compatible: should be "hisilicon,hix5hd2-sata-phy"
+- reg: offset and length of the PHY registers
+- #phy-cells: must be 0
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Optional Properties:
+- hisilicon,peri-syscon: phandle of syscon used to control peripheral.
+- hisilicon,power-reg: offset and bit number of the sata power supply register.
+ Only effective when hisilicon,peri-syscon is supplied.
+- hisilicon,reg-init: one of more sets of 4 cells. The first cell
+ is the register offset address, the second cell is the start bit in register,
+ the third cell means the bit width, and the fourth cell is the value to set.
+
+Example:
+ sata_phy: phy@f9900000 {
+ compatible = "hisilicon,hix5hd2-sata-phy";
+ reg = <0xf9900000 0x10000>;
+ #phy-cells = <0>;
+ hisilicon,peri-syscon = <&peri_ctrl>;
+ hisilicon,power-reg = <0x8 10>;
+ hisilicon,reg-init = <0x148 0 32 0x345cb8>,<0x14c 0 32 0x20545>;
+ };
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/