[PATCH 1/3] arm: multi_v7: enable igb, stmpe, spidev, lm95245, pwm leds

[Marcel Ziswiler]

The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp.
i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller,
SPI bus and PWM LEDs generically accessible from user space and an
LM95245 temperature sensor chip. The later four can also be found on
the Colibri T30 module.

While at it move the NEON entry down to its proper place to have it all
nicely ordered again.

Signed-off-by: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
---
BTW: How about TEGRA_EMC_SCALING_ENABLE, MACH_UX500_DT, OMAP_USB3 and
MMC_SUNXI which I haven't found any mentioning anywhere, MTD_M25P80
which depends on MTD_SPI_NOR or DOVE_THERMAL which depends on the
legacy ARCH_DOVE (besides USE_OF of course) being not much of multi
compatible?

 arch/arm/configs/multi_v7_defconfig |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 7f4645c..7cfc176 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -65,7 +65,6 @@ CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VEXPRESS_CA9X4=y
 CONFIG_ARCH_WM8850=y
 CONFIG_ARCH_ZYNQ=y
-CONFIG_NEON=y
 CONFIG_TRUSTED_FOUNDATIONS=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
@@ -81,6 +80,7 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
+CONFIG_NEON=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -132,6 +132,7 @@ CONFIG_NETDEVICES=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_MACB=y
 CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_IGB=y
 CONFIG_MV643XX_ETH=y
 CONFIG_MVNETA=y
 CONFIG_KS8851=y
@@ -155,6 +156,8 @@ CONFIG_KEYBOARD_TEGRA=y
 CONFIG_KEYBOARD_SPEAR=y
 CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MPU3050=y
 CONFIG_SERIO_AMBAKMI=y
@@ -200,6 +203,7 @@ CONFIG_SPI_SUN6I=y
 CONFIG_SPI_TEGRA114=y
 CONFIG_SPI_TEGRA20_SFLASH=y
 CONFIG_SPI_TEGRA20_SLINK=y
+CONFIG_SPI_SPIDEV=y
 CONFIG_PINCTRL_AS3722=y
 CONFIG_PINCTRL_PALMAS=y
 CONFIG_GPIO_SYSFS=y
@@ -217,6 +221,7 @@ CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_SUN6I=y
 CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM95245=y
 CONFIG_THERMAL=y
 CONFIG_DOVE_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
@@ -227,6 +232,7 @@ CONFIG_MFD_AS3722=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_SPI=y
 CONFIG_MFD_MAX8907=y
+CONFIG_MFD_STMPE=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
 CONFIG_MFD_TPS6586X=y
@@ -303,6 +309,9 @@ CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MMC_MVSDIO=y
 CONFIG_MMC_SUNXI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_PWM=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_HIGHBANK_MC=y
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/