[PATCH 37/71] clocksource: sh_mtu2: Turn sh_mtu2_priv fields into local variables

From: Daniel Lezcano
Date: Fri May 23 2014 - 06:43:59 EST


From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>

The rate and periodic fields are used in a single function only, as
local variables. Remove them from the structure.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Tested-by: Wolfram Sang <wsa@xxxxxxxxxxxxxxxxxxxx>
---
drivers/clocksource/sh_mtu2.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index 77992e0..6668455 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -39,8 +39,6 @@ struct sh_mtu2_priv {
struct clk *clk;
int irq;
struct platform_device *pdev;
- unsigned long rate;
- unsigned long periodic;
struct clock_event_device ced;
};

@@ -122,6 +120,8 @@ static void sh_mtu2_start_stop_ch(struct sh_mtu2_priv *p, int start)

static int sh_mtu2_enable(struct sh_mtu2_priv *p)
{
+ unsigned long periodic;
+ unsigned long rate;
int ret;

pm_runtime_get_sync(&p->pdev->dev);
@@ -137,13 +137,13 @@ static int sh_mtu2_enable(struct sh_mtu2_priv *p)
/* make sure channel is disabled */
sh_mtu2_start_stop_ch(p, 0);

- p->rate = clk_get_rate(p->clk) / 64;
- p->periodic = (p->rate + HZ/2) / HZ;
+ rate = clk_get_rate(p->clk) / 64;
+ periodic = (rate + HZ/2) / HZ;

/* "Periodic Counter Operation" */
sh_mtu2_write(p, TCR, 0x23); /* TGRA clear, divide clock by 64 */
sh_mtu2_write(p, TIOR, 0);
- sh_mtu2_write(p, TGR, p->periodic);
+ sh_mtu2_write(p, TGR, periodic);
sh_mtu2_write(p, TCNT, 0);
sh_mtu2_write(p, TMDR, 0);
sh_mtu2_write(p, TIER, 0x01);
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/