[PATCH 27/71] clocksource: sh_tmu: Add index to struct sh_tmu_channel

From: Daniel Lezcano
Date: Fri May 23 2014 - 06:32:19 EST


From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>

Use the index as the timer start/stop bit and when printing messages to
identify the channel.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
drivers/clocksource/sh_tmu.c | 35 ++++++++++++++++++++++++-----------
1 file changed, 24 insertions(+), 11 deletions(-)

diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index a464ed8..e304304 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -39,6 +39,7 @@ struct sh_tmu_device;

struct sh_tmu_channel {
struct sh_tmu_device *tmu;
+ unsigned int index;

void __iomem *base;
int irq;
@@ -102,7 +103,6 @@ static inline void sh_tmu_write(struct sh_tmu_channel *ch, int reg_nr,

static void sh_tmu_start_stop_ch(struct sh_tmu_channel *ch, int start)
{
- struct sh_timer_config *cfg = ch->tmu->pdev->dev.platform_data;
unsigned long flags, value;

/* start stop register shared by multiple timer channels */
@@ -110,9 +110,9 @@ static void sh_tmu_start_stop_ch(struct sh_tmu_channel *ch, int start)
value = sh_tmu_read(ch, TSTR);

if (start)
- value |= 1 << cfg->timer_bit;
+ value |= 1 << ch->index;
else
- value &= ~(1 << cfg->timer_bit);
+ value &= ~(1 << ch->index);

sh_tmu_write(ch, TSTR, value);
raw_spin_unlock_irqrestore(&sh_tmu_lock, flags);
@@ -125,7 +125,8 @@ static int __sh_tmu_enable(struct sh_tmu_channel *ch)
/* enable clock */
ret = clk_enable(ch->tmu->clk);
if (ret) {
- dev_err(&ch->tmu->pdev->dev, "cannot enable clock\n");
+ dev_err(&ch->tmu->pdev->dev, "ch%u: cannot enable clock\n",
+ ch->index);
return ret;
}

@@ -303,7 +304,8 @@ static int sh_tmu_register_clocksource(struct sh_tmu_channel *ch,
cs->mask = CLOCKSOURCE_MASK(32);
cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;

- dev_info(&ch->tmu->pdev->dev, "used as clock source\n");
+ dev_info(&ch->tmu->pdev->dev, "ch%u: used as clock source\n",
+ ch->index);

/* Register with dummy 1 Hz value, gets updated in ->enable() */
clocksource_register_hz(cs, 1);
@@ -349,12 +351,12 @@ static void sh_tmu_clock_event_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
dev_info(&ch->tmu->pdev->dev,
- "used for periodic clock events\n");
+ "ch%u: used for periodic clock events\n", ch->index);
sh_tmu_clock_event_start(ch, 1);
break;
case CLOCK_EVT_MODE_ONESHOT:
dev_info(&ch->tmu->pdev->dev,
- "used for oneshot clock events\n");
+ "ch%u: used for oneshot clock events\n", ch->index);
sh_tmu_clock_event_start(ch, 0);
break;
case CLOCK_EVT_MODE_UNUSED:
@@ -407,7 +409,8 @@ static void sh_tmu_register_clockevent(struct sh_tmu_channel *ch,
ced->suspend = sh_tmu_clock_event_suspend;
ced->resume = sh_tmu_clock_event_resume;

- dev_info(&ch->tmu->pdev->dev, "used for clock events\n");
+ dev_info(&ch->tmu->pdev->dev, "ch%u: used for clock events\n",
+ ch->index);

clockevents_config_and_register(ced, 1, 0x300, 0xffffffff);

@@ -415,8 +418,8 @@ static void sh_tmu_register_clockevent(struct sh_tmu_channel *ch,
IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
dev_name(&ch->tmu->pdev->dev), ch);
if (ret) {
- dev_err(&ch->tmu->pdev->dev, "failed to request irq %d\n",
- ch->irq);
+ dev_err(&ch->tmu->pdev->dev, "ch%u: failed to request irq %d\n",
+ ch->index, ch->irq);
return;
}
}
@@ -441,9 +444,19 @@ static int sh_tmu_channel_setup(struct sh_tmu_channel *ch,
memset(ch, 0, sizeof(*ch));
ch->tmu = tmu;

+ /*
+ * The SH3 variant (SH770x, SH7705, SH7710 and SH7720) maps channel
+ * registers blocks at base + 2 + 12 * index, while all other variants
+ * map them at base + 4 + 12 * index. We can compute the index by just
+ * dividing by 12, the 2 bytes or 4 bytes offset being hidden by the
+ * integer division.
+ */
+ ch->index = cfg->channel_offset / 12;
+
ch->irq = platform_get_irq(tmu->pdev, 0);
if (ch->irq < 0) {
- dev_err(&tmu->pdev->dev, "failed to get irq\n");
+ dev_err(&tmu->pdev->dev, "ch%u: failed to get irq\n",
+ ch->index);
return ch->irq;
}

--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/