Re: [PATCH v2 06/14] mmc: mmci: Qcomm: Add 3 clock cycle delay after register write

[Linus Walleij]

On Thu, May 15, 2014 at 11:37 AM,  <srinivas.kandagatla@xxxxxxxxxx> wrote:

> From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
>
> Most of the Qcomm SD card controller registers must be updated to the MCLK
> domain so subsequent writes to registers will be ignored until 3 clock cycles
> have passed.
>
> This patch adds a 3 clock cycle delay required after writing to controller
> registers on Qualcomm SOCs. Without this delay all the register writes are not
> successful, resulting in not detecting cards. The write clock delay is
> activated by setting up mclk_delayed_writes variable in variant data.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>

OK this is looking good.
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/