Re: [PATCH v2] pinctrl: add params in disable_setting for different usage

From: FanWu
Date: Thu May 22 2014 - 21:54:49 EST


On 05/23/2014 07:13 AM, Stephen Warren wrote:
On 05/21/2014 09:10 PM, fwu@xxxxxxxxxxx wrote:
From: Fan Wu <fwu@xxxxxxxxxxx>

What the patch did:
1.To call pinmux_disable_setting ahead of pinmux_enable_setting in each time of
calling pinctrl_select_state
2.Remove the HW disable operation in in pinmux_disable_setting function.

...
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index c0fe609..c97491a 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -993,25 +993,13 @@ int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *state)
* may not be identical to the set of groups with a mux setting
* in the new state. While this might be unusual, it's entirely
* possible for the "user"-supplied mapping table to be written
- * that way. For each group that was configured in the old state
- * but not in the new state, this code puts that group into a
- * safe/disabled state.
+ * that way. This code is used for each group that was
+ * configured in the old state but not in the new state


Looking at the code, it's run for every group in the state, not "each
group that was configured in the old state but not in the new state"

@@ -515,9 +514,6 @@ void pinmux_disable_setting(struct pinctrl_setting const *setting)
pins[i], desc->name, gname);
}
}
-
- if (ops->disable)
- ops->disable(pctldev, setting->data.mux.func, setting->data.mux.group);
}

Should that op be removed from the header file and all drivers too?


Dear Stephen,

For you question 1:
The disable_pinmux_setting is for the all of the setting in old state. This is what we really need to do, ahead of enable setting in new state.
In the first patch I filed, which still includes the HW ops in disable_pinmux_setting, to disable each setting in old state and then to enable the setting in new state will introduce HW glitch.
But in the current solution, the glitch will not be there, because there is no HW ops in disable_pinmux_setting.
And please notice the patch is mainly used to avoid the duplicated enable operation for the same pin.

For your question 2:
the pinctrl-single driver is still using ops->disable, if I remove the "disable" in ops, there will be build error in the vendor's code base who is using pinctrl-single driver.

Just as I said in the last mail,
the next plan for this topic:

1. To remove the disable ops registration when defining the
"include/linux/pinctrl/pinmux.h" in inctrl-single driver.
Meanwhile, the related things, like "pinctrl-single,function-off"
property and corresponding flag in "pcs_device", will be also removed.

2. To remove the disable ops in "pinmux_ops" in the file of include/linux/pinctrl/pinmux.h

Are you OK for this ?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/