[PATCH net-next v2 3/9] net: bcmgenet: use the new fixed PHY helpers

From: Florian Fainelli
Date: Thu May 22 2014 - 12:54:51 EST


of_phy_connect_fixed_link() is becoming obsolete, and also required
platform code to register the fixed PHYs at the specified addresses for
those to be usable. Get rid of it and use the new of_phy_is_fixed_link()
plus of_phy_register_fixed_link() helpers to transition over the new
scheme.

Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
No changes in v2

drivers/net/ethernet/broadcom/genet/bcmmii.c | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 4608673beaff..add8d8596084 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -298,6 +298,7 @@ int bcmgenet_mii_config(struct net_device *dev)
static int bcmgenet_mii_probe(struct net_device *dev)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
+ struct device_node *dn = priv->pdev->dev.of_node;
struct phy_device *phydev;
unsigned int phy_flags;
int ret;
@@ -307,15 +308,19 @@ static int bcmgenet_mii_probe(struct net_device *dev)
return 0;
}

- if (priv->phy_dn)
- phydev = of_phy_connect(dev, priv->phy_dn,
- bcmgenet_mii_setup, 0,
- priv->phy_interface);
- else
- phydev = of_phy_connect_fixed_link(dev,
- bcmgenet_mii_setup,
- priv->phy_interface);
+ /* In the case of a fixed PHY, the DT node associated
+ * to the PHY is the Ethernet MAC DT node.
+ */
+ if (of_phy_is_fixed_link(dn)) {
+ ret = of_phy_register_fixed_link(dn);
+ if (ret)
+ return ret;
+
+ priv->phy_dn = dn;
+ }

+ phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup, 0,
+ priv->phy_interface);
if (!phydev) {
pr_err("could not attach to PHY\n");
return -ENODEV;
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/