[PATCH 08/10 v2.1] usb: gadget: net2280: Code Cleanup

From: Ricardo Ribalda Delgado
Date: Tue May 20 2014 - 12:31:39 EST


- Move logical continuations to end of line
- Improve spacing

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
---
v2: Comments by Alan Stern
-Use octal notation istead of S_I

drivers/usb/gadget/net2280.c | 155 +++++++++++++++++++++----------------------
drivers/usb/gadget/net2280.h | 4 +-
2 files changed, 78 insertions(+), 81 deletions(-)

diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index d1d4f4f..d506c83 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -100,9 +100,9 @@ static bool use_dma_chaining;
static bool use_msi = true;

/* "modprobe net2280 use_dma=n" etc */
-module_param(use_dma, bool, S_IRUGO);
-module_param(use_dma_chaining, bool, S_IRUGO);
-module_param(use_msi, bool, S_IRUGO);
+module_param(use_dma, bool, 0444);
+module_param(use_dma_chaining, bool, 0444);
+module_param(use_msi, bool, 0444);

/* mode 0 == ep-{a,b,c,d} 1K fifo each
* mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable
@@ -111,7 +111,7 @@ module_param(use_msi, bool, S_IRUGO);
static ushort fifo_mode;

/* "modprobe net2280 fifo_mode=1" etc */
-module_param (fifo_mode, ushort, 0644);
+module_param(fifo_mode, ushort, 0644);

/* enable_suspend -- When enabled, the driver will respond to
* USB suspend requests by powering down the NET2280. Otherwise,
@@ -121,7 +121,7 @@ module_param (fifo_mode, ushort, 0644);
static bool enable_suspend;

/* "modprobe net2280 enable_suspend=1" etc */
-module_param(enable_suspend, bool, S_IRUGO);
+module_param(enable_suspend, bool, 0444);

/* force full-speed operation */
static bool full_speed;
@@ -169,8 +169,8 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
static const u32 ep_key[9] = { 1, 0, 1, 0, 1, 1, 0, 1, 0 };

ep = container_of(_ep, struct net2280_ep, ep);
- if (!_ep || !desc || ep->desc || _ep->name == ep0name
- || desc->bDescriptorType != USB_DT_ENDPOINT)
+ if (!_ep || !desc || ep->desc || _ep->name == ep0name ||
+ desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
dev = ep->dev;
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
@@ -220,9 +220,9 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
tmp = (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
if (tmp == USB_ENDPOINT_XFER_INT) {
/* erratum 0105 workaround prevents hs NYET */
- if (dev->chiprev == 0100
- && dev->gadget.speed == USB_SPEED_HIGH
- && !(desc->bEndpointAddress & USB_DIR_IN))
+ if (dev->chiprev == 0100 &&
+ dev->gadget.speed == USB_SPEED_HIGH &&
+ !(desc->bEndpointAddress & USB_DIR_IN))
writel(BIT(CLEAR_NAK_OUT_PACKETS_MODE),
&ep->regs->ep_rsp);
} else if (tmp == USB_ENDPOINT_XFER_BULK) {
@@ -402,8 +402,8 @@ static void ep_reset_228x(struct net2280_regs __iomem *regs,
BIT(DATA_PACKET_RECEIVED_INTERRUPT) |
BIT(DATA_PACKET_TRANSMITTED_INTERRUPT) |
BIT(DATA_OUT_PING_TOKEN_INTERRUPT) |
- BIT(DATA_IN_TOKEN_INTERRUPT)
- , &ep->regs->ep_stat);
+ BIT(DATA_IN_TOKEN_INTERRUPT),
+ &ep->regs->ep_stat);

/* fifo size is handled separately */
}
@@ -425,9 +425,9 @@ static void ep_reset_338x(struct net2280_regs __iomem *regs,
writel(BIT(DMA_ABORT_DONE_INTERRUPT) |
BIT(DMA_PAUSE_DONE_INTERRUPT) |
BIT(DMA_SCATTER_GATHER_DONE_INTERRUPT) |
- BIT(DMA_TRANSACTION_DONE_INTERRUPT)
- /* | BIT(DMA_ABORT) */
- , &ep->dma->dmastat);
+ BIT(DMA_TRANSACTION_DONE_INTERRUPT),
+ /* | BIT(DMA_ABORT), */
+ &ep->dma->dmastat);

dmastat = readl(&ep->dma->dmastat);
if (dmastat == 0x5002) {
@@ -618,15 +618,15 @@ static void out_flush(struct net2280_ep *ep)

statp = &ep->regs->ep_stat;
writel(BIT(DATA_OUT_PING_TOKEN_INTERRUPT) |
- BIT(DATA_PACKET_RECEIVED_INTERRUPT)
- , statp);
+ BIT(DATA_PACKET_RECEIVED_INTERRUPT),
+ statp);
writel(BIT(FIFO_FLUSH), statp);
/* Make sure that stap is written */
mb();
tmp = readl(statp);
- if (tmp & BIT(DATA_OUT_PING_TOKEN_INTERRUPT)
+ if (tmp & BIT(DATA_OUT_PING_TOKEN_INTERRUPT) &&
/* high speed did bulk NYET; fifo isn't filling */
- && ep->dev->gadget.speed == USB_SPEED_FULL) {
+ ep->dev->gadget.speed == USB_SPEED_FULL) {
unsigned usec;

usec = 50; /* 64 byte bulk/interrupt */
@@ -653,8 +653,8 @@ static int read_fifo(struct net2280_ep *ep, struct net2280_request *req)
/* erratum 0106 ... packets coming in during fifo reads might
* be incompletely rejected. not all cases have workarounds.
*/
- if (ep->dev->chiprev == 0x0100
- && ep->dev->gadget.speed == USB_SPEED_FULL) {
+ if (ep->dev->chiprev == 0x0100 &&
+ ep->dev->gadget.speed == USB_SPEED_FULL) {
udelay(1);
tmp = readl(&ep->regs->ep_stat);
if ((tmp & BIT(NAK_OUT_PACKETS)))
@@ -726,8 +726,8 @@ static int read_fifo(struct net2280_ep *ep, struct net2280_request *req)
(void) readl(&ep->regs->ep_rsp);
}

- return is_short || ((req->req.actual == req->req.length)
- && !req->req.zero);
+ return is_short || ((req->req.actual == req->req.length) &&
+ !req->req.zero);
}

/* fill out dma descriptor to match a given request */
@@ -744,8 +744,8 @@ static void fill_dma_desc(struct net2280_ep *ep,
*/
if (ep->is_in)
dmacount |= BIT(DMA_DIRECTION);
- if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0)
- || ep->dev->pdev->device != 0x2280)
+ if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) ||
+ ep->dev->pdev->device != 0x2280)
dmacount |= BIT(END_OF_CHAIN);

req->valid = valid;
@@ -836,8 +836,8 @@ static void start_dma(struct net2280_ep *ep, struct net2280_request *req)

/* dma irq, faking scatterlist status */
req->td->dmacount = cpu_to_le32(req->req.length - tmp);
- writel(BIT(DMA_DONE_INTERRUPT_ENABLE)
- | tmp, &dma->dmacount);
+ writel(BIT(DMA_DONE_INTERRUPT_ENABLE) | tmp,
+ &dma->dmacount);
req->td->dmadesc = 0;
req->valid = 1;

@@ -1120,8 +1120,8 @@ static void scan_dma_completions(struct net2280_ep *ep)
/* single transfer mode */
dma_done(ep, req, tmp, 0);
break;
- } else if (!ep->is_in
- && (req->req.length % ep->ep.maxpacket) != 0) {
+ } else if (!ep->is_in &&
+ (req->req.length % ep->ep.maxpacket) != 0) {
tmp = readl(&ep->regs->ep_stat);
if (ep->dev->pdev->vendor == PCI_VENDOR_ID_PLX)
return dma_done(ep, req, tmp, 0);
@@ -1317,8 +1317,8 @@ static int net2280_dequeue(struct usb_ep *_ep, struct usb_request *_req)
writel(le32_to_cpu(req->td->dmadesc),
&ep->dma->dmadesc);
if (req->td->dmacount & dma_done_ie)
- writel(readl(&ep->dma->dmacount)
- | le32_to_cpu(dma_done_ie),
+ writel(readl(&ep->dma->dmacount) |
+ le32_to_cpu(dma_done_ie),
&ep->dma->dmacount);
} else {
struct net2280_request *prev;
@@ -2255,8 +2255,8 @@ static void ep0_start_228x(struct net2280 *dev)
{
writel(BIT(CLEAR_EP_HIDE_STATUS_PHASE) |
BIT(CLEAR_NAK_OUT_PACKETS) |
- BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE)
- , &dev->epregs[0].ep_rsp);
+ BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE),
+ &dev->epregs[0].ep_rsp);

/*
* hardware optionally handles a bunch of standard requests
@@ -2268,8 +2268,8 @@ static void ep0_start_228x(struct net2280 *dev)
BIT(SET_ADDRESS) |
BIT(DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP) |
BIT(GET_DEVICE_STATUS) |
- BIT(GET_INTERFACE_STATUS)
- , &dev->usb->stdrsp);
+ BIT(GET_INTERFACE_STATUS),
+ &dev->usb->stdrsp);
writel(BIT(USB_ROOT_PORT_WAKEUP_ENABLE) |
BIT(SELF_POWERED_USB_DEVICE) |
BIT(REMOTE_WAKEUP_SUPPORT) |
@@ -2330,8 +2330,8 @@ static void ep0_start_338x(struct net2280 *dev)

/* enable irqs so we can see ep0 and general operation */
writel(BIT(SETUP_PACKET_INTERRUPT_ENABLE) |
- BIT(ENDPOINT_0_INTERRUPT_ENABLE)
- , &dev->regs->pciirqenb0);
+ BIT(ENDPOINT_0_INTERRUPT_ENABLE),
+ &dev->regs->pciirqenb0);
writel(BIT(PCI_INTERRUPT_ENABLE) |
BIT(ROOT_PORT_RESET_INTERRUPT_ENABLE) |
BIT(SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE) |
@@ -2366,8 +2366,8 @@ static int net2280_start(struct usb_gadget *_gadget,
* (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE)
* "must not be used in normal operation"
*/
- if (!driver || driver->max_speed < USB_SPEED_HIGH
- || !driver->setup)
+ if (!driver || driver->max_speed < USB_SPEED_HIGH ||
+ !driver->setup)
return -EINVAL;

dev = container_of(_gadget, struct net2280, gadget);
@@ -2542,10 +2542,10 @@ static void handle_ep_small(struct net2280_ep *ep)
}
mode = 2;
/* an extra OUT token is an error */
- } else if (((t & BIT(DATA_OUT_PING_TOKEN_INTERRUPT))
- && req
- && req->req.actual == req->req.length)
- || (ep->responded && !req)) {
+ } else if (((t & BIT(DATA_OUT_PING_TOKEN_INTERRUPT)) &&
+ req &&
+ req->req.actual == req->req.length) ||
+ (ep->responded && !req)) {
ep->dev->protocol_stall = 1;
set_halt(ep);
ep->stopped = 1;
@@ -2576,8 +2576,8 @@ static void handle_ep_small(struct net2280_ep *ep)
* dma handles (M >= N), may empty the queue
*/
scan_dma_completions(ep);
- if (unlikely(list_empty(&ep->queue)
- || ep->out_overflow)) {
+ if (unlikely(list_empty(&ep->queue) ||
+ ep->out_overflow)) {
req = NULL;
break;
}
@@ -2611,10 +2611,10 @@ static void handle_ep_small(struct net2280_ep *ep)
}

/* also flush to prevent erratum 0106 trouble */
- if (unlikely(ep->out_overflow
- || (ep->dev->chiprev == 0x0100
- && ep->dev->gadget.speed
- == USB_SPEED_FULL))) {
+ if (unlikely(ep->out_overflow ||
+ (ep->dev->chiprev == 0x0100 &&
+ ep->dev->gadget.speed
+ == USB_SPEED_FULL))) {
out_flush(ep);
ep->out_overflow = 0;
}
@@ -2808,9 +2808,9 @@ static void ep_stall(struct net2280_ep *ep, int stall)
val = readl(&ep->regs->ep_rsp);
val |= BIT(CLEAR_ENDPOINT_HALT) |
BIT(CLEAR_ENDPOINT_TOGGLE);
- writel(val
- /* | BIT(CLEAR_NAK_PACKETS)*/
- , &ep->regs->ep_rsp);
+ writel(val,
+ /* | BIT(CLEAR_NAK_PACKETS),*/
+ &ep->regs->ep_rsp);
ep->is_halt = 0;
val = readl(&ep->regs->ep_rsp);
}
@@ -3125,8 +3125,8 @@ static void handle_stat0_irqs(struct net2280 *dev, u32 stat)
BIT(DATA_PACKET_RECEIVED_INTERRUPT) |
BIT(DATA_PACKET_TRANSMITTED_INTERRUPT) |
BIT(DATA_OUT_PING_TOKEN_INTERRUPT) |
- BIT(DATA_IN_TOKEN_INTERRUPT)
- , &ep->regs->ep_stat);
+ BIT(DATA_IN_TOKEN_INTERRUPT),
+ &ep->regs->ep_stat);
}
u.raw[0] = readl(&dev->usb->setup0123);
u.raw[1] = readl(&dev->usb->setup4567);
@@ -3206,8 +3206,7 @@ static void handle_stat0_irqs(struct net2280 *dev, u32 stat)
/* hw handles device features */
if (u.r.bRequestType != USB_RECIP_ENDPOINT)
goto delegate;
- if (w_value != USB_ENDPOINT_HALT
- || w_length != 0)
+ if (w_value != USB_ENDPOINT_HALT || w_length != 0)
goto do_stall;
e = get_ep_by_addr(dev, w_index);
if (!e)
@@ -3233,8 +3232,7 @@ static void handle_stat0_irqs(struct net2280 *dev, u32 stat)
/* hw handles device features */
if (u.r.bRequestType != USB_RECIP_ENDPOINT)
goto delegate;
- if (w_value != USB_ENDPOINT_HALT
- || w_length != 0)
+ if (w_value != USB_ENDPOINT_HALT || w_length != 0)
goto do_stall;
e = get_ep_by_addr(dev, w_index);
if (!e)
@@ -3326,12 +3324,11 @@ static void handle_stat1_irqs(struct net2280 *dev, u32 stat)
*/
if (stat & tmp) {
writel(tmp, &dev->regs->irqstat1);
- if ((((stat & BIT(ROOT_PORT_RESET_INTERRUPT))
- && ((readl(&dev->usb->usbstat) & mask)
- == 0))
- || ((readl(&dev->usb->usbctl)
- & BIT(VBUS_PIN)) == 0)
- ) && (dev->gadget.speed != USB_SPEED_UNKNOWN)) {
+ if ((((stat & BIT(ROOT_PORT_RESET_INTERRUPT)) &&
+ (readl(&dev->usb->usbstat) & mask)) ||
+ ((readl(&dev->usb->usbctl) &
+ BIT(VBUS_PIN)) == 0)) &&
+ (dev->gadget.speed != USB_SPEED_UNKNOWN)) {
DEBUG(dev, "disconnect %s\n",
dev->driver->driver.name);
stop_activity(dev, dev->driver);
@@ -3560,7 +3557,7 @@ static void net2280_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
device_remove_file(&pdev->dev, &dev_attr_registers);

- INFO (dev, "unbind\n");
+ INFO(dev, "unbind\n");
}

/* wrap this driver around the specified device, but
@@ -3783,29 +3780,29 @@ static const struct pci_device_id pci_ids[] = { {
.device = 0x2280,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
-}, {
+ }, {
.class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_PLX_LEGACY,
.device = 0x2282,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
-},
+ },
{
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
- .class_mask = ~0,
- .vendor = PCI_VENDOR_ID_PLX,
- .device = 0x3380,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
+ .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class_mask = ~0,
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = 0x3380,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
},
{
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
- .class_mask = ~0,
- .vendor = PCI_VENDOR_ID_PLX,
- .device = 0x3382,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
+ .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class_mask = ~0,
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = 0x3382,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
},
{ /* end: all zeroes */ }
};
diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h
index f019d6c..77c39d9 100644
--- a/drivers/usb/gadget/net2280.h
+++ b/drivers/usb/gadget/net2280.h
@@ -117,8 +117,8 @@ static inline void allow_status(struct net2280_ep *ep)
/* ep0 only */
writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) |
BIT(CLEAR_NAK_OUT_PACKETS) |
- BIT(CLEAR_NAK_OUT_PACKETS_MODE)
- , &ep->regs->ep_rsp);
+ BIT(CLEAR_NAK_OUT_PACKETS_MODE),
+ &ep->regs->ep_rsp);
ep->stopped = 1;
}

--
2.0.0.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/