[Patch Part1 V2 22/29] x86, devicetree, irq: use common mechanism to support irqdomain

From: Jiang Liu
Date: Mon May 19 2014 - 12:28:19 EST


Now the ioapic driver provides a common interface to create irqdomain,
so replace the private implementation.

Signed-off-by: Jiang Liu <jiang.liu@xxxxxxxxxxxxxxx>
---
arch/x86/include/asm/prom.h | 2 --
arch/x86/kernel/devicetree.c | 80 ++++--------------------------------------
arch/x86/kernel/irqinit.c | 6 ----
3 files changed, 7 insertions(+), 81 deletions(-)

diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h
index fbeb06ed0eaa..1d081ac1cd69 100644
--- a/arch/x86/include/asm/prom.h
+++ b/arch/x86/include/asm/prom.h
@@ -26,12 +26,10 @@
extern int of_ioapic;
extern u64 initial_dtb;
extern void add_dtb(u64 data);
-extern void x86_add_irq_domains(void);
void x86_of_pci_init(void);
void x86_dtb_init(void);
#else
static inline void add_dtb(u64 data) { }
-static inline void x86_add_irq_domains(void) { }
static inline void x86_of_pci_init(void) { }
static inline void x86_dtb_init(void) { }
#define of_ioapic 0
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 1ab002c045c9..a44d45df49f5 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -164,6 +164,7 @@ static void __init dtb_lapic_setup(void)

#ifdef CONFIG_X86_IO_APIC
static unsigned int ioapic_id;
+static struct irq_domain *dt_add_ioapic_domain(int ioapic_num, void *arg);

static void __init dtb_add_ioapic(struct device_node *dn)
{
@@ -176,7 +177,8 @@ static void __init dtb_add_ioapic(struct device_node *dn)
dn->full_name);
return;
}
- mp_register_ioapic(++ioapic_id, r.start, gsi_top, NULL, NULL);
+ mp_register_ioapic(++ioapic_id, r.start, gsi_top,
+ dt_add_ioapic_domain, dn);
}

static void __init dtb_ioapic_setup(void)
@@ -293,7 +295,7 @@ static int ioapic_xlate(struct irq_domain *domain,

it = &of_ioapic_type[intspec[1]];

- idx = (u32) domain->host_data;
+ idx = (u32)(long)domain->host_data;
set_io_apic_irq_attr(&attr, idx, line, it->trigger, it->polarity);

rc = io_apic_setup_irq_pin_once(irq_find_mapping(domain, line),
@@ -310,78 +312,10 @@ const struct irq_domain_ops ioapic_irq_domain_ops = {
.xlate = ioapic_xlate,
};

-static void dt_add_ioapic_domain(unsigned int ioapic_num,
- struct device_node *np)
+static struct irq_domain *dt_add_ioapic_domain(int ioapic, void *arg)
{
- struct irq_domain *id;
- struct mp_ioapic_gsi *gsi_cfg;
- int ret;
- int num;
-
- gsi_cfg = mp_ioapic_gsi_routing(ioapic_num);
- num = gsi_cfg->gsi_end - gsi_cfg->gsi_base + 1;
-
- id = irq_domain_add_linear(np, num, &ioapic_irq_domain_ops,
- (void *)ioapic_num);
- BUG_ON(!id);
- if (gsi_cfg->gsi_base == 0) {
- /*
- * The first NR_IRQS_LEGACY irq descs are allocated in
- * early_irq_init() and need just a mapping. The
- * remaining irqs need both. All of them are preallocated
- * and assigned so we can keep the 1:1 mapping which the ioapic
- * is having.
- */
- irq_domain_associate_many(id, 0, 0, NR_IRQS_LEGACY);
-
- if (num > NR_IRQS_LEGACY) {
- ret = irq_create_strict_mappings(id, NR_IRQS_LEGACY,
- NR_IRQS_LEGACY, num - NR_IRQS_LEGACY);
- if (ret)
- pr_err("Error creating mapping for the "
- "remaining IRQs: %d\n", ret);
- }
- irq_set_default_host(id);
- } else {
- ret = irq_create_strict_mappings(id, gsi_cfg->gsi_base, 0, num);
- if (ret)
- pr_err("Error creating IRQ mapping: %d\n", ret);
- }
-}
-
-static void __init ioapic_add_ofnode(struct device_node *np)
-{
- struct resource r;
- int i, ret;
+ struct device_node *np = arg;

- ret = of_address_to_resource(np, 0, &r);
- if (ret) {
- printk(KERN_ERR "Failed to obtain address for %s\n",
- np->full_name);
- return;
- }
-
- for (i = 0; i < nr_ioapics; i++) {
- if (r.start == mpc_ioapic_addr(i)) {
- dt_add_ioapic_domain(i, np);
- return;
- }
- }
- printk(KERN_ERR "IOxAPIC at %s is not registered.\n", np->full_name);
-}
-
-void __init x86_add_irq_domains(void)
-{
- struct device_node *dp;
-
- if (!of_have_populated_dt())
- return;
-
- for_each_node_with_property(dp, "interrupt-controller") {
- if (of_device_is_compatible(dp, "intel,ce4100-ioapic"))
- ioapic_add_ofnode(dp);
- }
+ return mp_irqdomain_create(ioapic, np, &ioapic_irq_domain_ops);
}
-#else
-void __init x86_add_irq_domains(void) { }
#endif
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 7f50156542fb..a9c0066762e5 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -87,12 +87,6 @@ void __init init_IRQ(void)
int i;

/*
- * We probably need a better place for this, but it works for
- * now ...
- */
- x86_add_irq_domains();
-
- /*
* On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15.
* If these IRQ's are handled by legacy interrupt-controllers like PIC,
* then this configuration will likely be static after the boot. If
--
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/