Re: [PATCH 1/4] phy: miphy365x: Add Device Tree bindings for the MiPHY365x

From: Lee Jones
Date: Mon May 19 2014 - 09:56:32 EST


Kishon,

Did you receive this set okay? I believe it's still unmerged?

> The MiPHY365x is a Generic PHY which can serve various SATA or PCIe
> devices. It has 2 ports which it can use for either; both SATA, both
> PCIe or one of each in any configuration.
>
> Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
> Acked-by: Mark Rutland <mark.rutland@xxxxxxx>
> Acked-by: Alexandre Torgue <alexandre.torgue@xxxxxx>
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
> ---
> .../devicetree/bindings/phy/phy-miphy365x.txt | 62 ++++++++++++++++++++++
> 1 file changed, 62 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> new file mode 100644
> index 0000000..cb39de1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> @@ -0,0 +1,62 @@
> +STMicroelectronics STi MIPHY365x PHY binding
> +============================================
> +
> +This binding describes a miphy device that is used to control PHY hardware
> +for SATA and PCIe.
> +
> +Required properties:
> +- compatible : Should be "st,miphy365x-phy"
> +- #phy-cells : Should be 2 (See second example)
> + First cell is the port number from:
> + - MIPHY_PORT_0
> + - MIPHY_PORT_1
> + Second cell is device type from:
> + - MIPHY_TYPE_SATA
> + - MIPHY_TYPE_PCI
> +- reg : Address and length of register sets for each device in
> + "reg-names"
> +- reg-names : The names of the register addresses corresponding to the
> + registers filled in "reg", from:
> + - sata0: For SATA port 0 registers
> + - sata1: For SATA port 1 registers
> + - pcie0: For PCIE port 0 registers
> + - pcie1: For PCIE port 1 registers
> +- st,syscfg : Should be a phandle of the system configuration register group
> + which contain the SATA, PCIe mode setting bits
> +
> +Optional properties:
> +- st,sata-gen : Generation of locally attached SATA IP. Expected values
> + are {1,2,3). If not supplied generation 1 hardware will
> + be expected
> +- st,pcie-tx-pol-inv : Bool property to invert the polarity PCIe Tx (Txn/Txp)
> +- st,sata-tx-pol-inv : Bool property to invert the polarity SATA Tx (Txn/Txp)
> +
> +Example:
> +
> + miphy365x_phy: miphy365x@fe382000 {
> + compatible = "st,miphy365x-phy";
> + #phy-cells = <2>;
> + reg = <0xfe382000 0x100>,
> + <0xfe38a000 0x100>,
> + <0xfe394000 0x100>,
> + <0xfe804000 0x100>;
> + reg-names = "sata0", "sata1", "pcie0", "pcie1";
> + st,syscfg = <&syscfg_rear>;
> + };
> +
> +Specifying phy control of devices
> +=================================
> +
> +Device nodes should specify the configuration required in their "phys"
> +property, containing a phandle to the miphy device node, a port number
> +and a device type.
> +
> +Example:
> +
> +#include <dt-bindings/phy/phy-miphy365x.h>
> +
> + sata0: sata@fe380000 {
> + ...
> + phys = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>;
> + ...
> + };

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/