[PATCH V3 4/4] cpufreq: Tegra: implement intermediate frequency callbacks

From: Viresh Kumar
Date: Sat May 17 2014 - 00:52:14 EST


Tegra had always been switching to intermediate frequency (pll_p_clk) since
ever. CPUFreq core has better support for handling notifications for these
frequencies and so we can adapt Tegra's driver to it.

Tested-by: Stephen Warren <swarren@xxxxxxxxxx>
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
drivers/cpufreq/tegra-cpufreq.c | 71 +++++++++++++++++++++--------------------
1 file changed, 37 insertions(+), 34 deletions(-)

diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c
index 6e774c6..fc66442 100644
--- a/drivers/cpufreq/tegra-cpufreq.c
+++ b/drivers/cpufreq/tegra-cpufreq.c
@@ -46,10 +46,19 @@ static struct clk *pll_x_clk;
static struct clk *pll_p_clk;
static struct clk *emc_clk;

-static int tegra_cpu_clk_set_rate(unsigned long rate)
+static unsigned int
+tegra_get_intermediate(struct cpufreq_policy *policy, unsigned int index)
+{
+ return clk_get_rate(pll_p_clk) / 1000; /* kHz */
+}
+
+static int
+tegra_target_intermediate(struct cpufreq_policy *policy, unsigned int frequency)
{
int ret;

+ WARN_ON(frequency != clk_get_rate(pll_p_clk) / 1000);
+
/*
* Take an extra reference to the main pll so it doesn't turn
* off when we move the cpu off of it
@@ -57,28 +66,9 @@ static int tegra_cpu_clk_set_rate(unsigned long rate)
clk_prepare_enable(pll_x_clk);

ret = clk_set_parent(cpu_clk, pll_p_clk);
- if (ret) {
- pr_err("Failed to switch cpu to clock pll_p\n");
- goto out;
- }
-
- if (rate == clk_get_rate(pll_p_clk))
- goto out;
-
- ret = clk_set_rate(pll_x_clk, rate);
- if (ret) {
- pr_err("Failed to change pll_x to %lu\n", rate);
- goto out;
- }
-
- ret = clk_set_parent(cpu_clk, pll_x_clk);
- if (ret) {
- pr_err("Failed to switch cpu to clock pll_x\n");
- goto out;
- }
+ if (ret)
+ clk_disable_unprepare(pll_x_clk);

-out:
- clk_disable_unprepare(pll_x_clk);
return ret;
}

@@ -98,10 +88,21 @@ static int tegra_target(struct cpufreq_policy *policy, unsigned int index)
else
clk_set_rate(emc_clk, 100000000); /* emc 50Mhz */

- ret = tegra_cpu_clk_set_rate(rate * 1000);
+ if (rate == clk_get_rate(pll_p_clk))
+ goto out;
+
+ ret = clk_set_rate(pll_x_clk, rate * 1000);
+ if (ret) {
+ pr_err("Failed to change pll_x to %lu\n", rate);
+ goto out;
+ }
+
+ ret = clk_set_parent(cpu_clk, pll_x_clk);
if (ret)
- pr_err("cpu-tegra: Failed to set cpu frequency to %lu kHz\n",
- rate);
+ pr_err("Failed to switch cpu to clock pll_x\n");
+
+out:
+ clk_disable_unprepare(pll_x_clk);

return ret;
}
@@ -137,16 +138,18 @@ static int tegra_cpu_exit(struct cpufreq_policy *policy)
}

static struct cpufreq_driver tegra_cpufreq_driver = {
- .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = tegra_target,
- .get = cpufreq_generic_get,
- .init = tegra_cpu_init,
- .exit = tegra_cpu_exit,
- .name = "tegra",
- .attr = cpufreq_generic_attr,
+ .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+ .verify = cpufreq_generic_frequency_table_verify,
+ .get_intermediate = tegra_get_intermediate,
+ .target_intermediate = tegra_target_intermediate,
+ .target_index = tegra_target,
+ .get = cpufreq_generic_get,
+ .init = tegra_cpu_init,
+ .exit = tegra_cpu_exit,
+ .name = "tegra",
+ .attr = cpufreq_generic_attr,
#ifdef CONFIG_PM
- .suspend = cpufreq_generic_suspend,
+ .suspend = cpufreq_generic_suspend,
#endif
};

--
2.0.0.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/