[PATCH] ARM: sa1100: remove unused header

From: Paul Bolle
Date: Fri May 16 2014 - 04:58:17 EST


SA-1101.h was included in the tree shortly before v2.4.0. The #include
preprocessor directive that includes it has always depended on a
preprocessor check for CONFIG_SA1101. But the related (Kconfig) symbol
has never been part of the tree. Remove that preprocessor check and this
unused header.

Signed-off-by: Paul Bolle <pebolle@xxxxxxxxxx>
---
Tested only with git grep (on roughly 14 years of Linux history).

arch/arm/mach-sa1100/include/mach/SA-1101.h | 925 ---------------------------
arch/arm/mach-sa1100/include/mach/hardware.h | 4 -
2 files changed, 929 deletions(-)
delete mode 100644 arch/arm/mach-sa1100/include/mach/SA-1101.h

diff --git a/arch/arm/mach-sa1100/include/mach/SA-1101.h b/arch/arm/mach-sa1100/include/mach/SA-1101.h
deleted file mode 100644
index 5d2ad7db991c..000000000000
--- a/arch/arm/mach-sa1100/include/mach/SA-1101.h
+++ /dev/null
@@ -1,925 +0,0 @@
-/*
- * SA-1101.h
- *
- * Copyright (c) Peter Danielsson 1999
- *
- * Definition of constants related to the sa1101
- * support chip for the sa1100
- *
- */
-
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error You must include hardware.h not SA-1101.h
-#endif
-
-#ifndef SA1101_BASE
-#error You must define SA-1101 physical base address
-#endif
-
-#ifndef LANGUAGE
-# ifdef __ASSEMBLY__
-# define LANGUAGE Assembly
-# else
-# define LANGUAGE C
-# endif
-#endif
-
-/*
- * We have mapped the sa1101 depending on the value of SA1101_BASE.
- * It then appears from 0xf4000000.
- */
-
-#define SA1101_p2v( x ) ((x) - SA1101_BASE + 0xf4000000)
-#define SA1101_v2p( x ) ((x) - 0xf4000000 + SA1101_BASE)
-
-#ifndef SA1101_p2v
-#define SA1101_p2v(PhAdd) (PhAdd)
-#endif
-
-#include <mach/bitfield.h>
-
-#define C 0
-#define Assembly 1
-
-
-/*
- * Memory map
- */
-
-#define __SHMEM_CONTROL0 0x00000000
-#define __SYSTEM_CONTROL1 0x00000400
-#define __ARBITER 0x00020000
-#define __SYSTEM_CONTROL2 0x00040000
-#define __SYSTEM_CONTROL3 0x00060000
-#define __PARALLEL_PORT 0x00080000
-#define __VIDMEM_CONTROL 0x00100000
-#define __UPDATE_FIFO 0x00120000
-#define __SHMEM_CONTROL1 0x00140000
-#define __INTERRUPT_CONTROL 0x00160000
-#define __USB_CONTROL 0x00180000
-#define __TRACK_INTERFACE 0x001a0000
-#define __MOUSE_INTERFACE 0x001b0000
-#define __KEYPAD_INTERFACE 0x001c0000
-#define __PCMCIA_INTERFACE 0x001e0000
-#define __VGA_CONTROL 0x00200000
-#define __GPIO_INTERFACE 0x00300000
-
-/*
- * Macro that calculates real address for registers in the SA-1101
- */
-
-#define _SA1101( x ) ((x) + SA1101_BASE)
-
-/*
- * Interface and shared memory controller registers
- *
- * Registers
- * SKCR SA-1101 control register (read/write)
- * SMCR Shared Memory Controller Register
- * SNPR Snoop Register
- */
-
-#define _SKCR _SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
-#define _SMCR _SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
-#define _SNPR _SA1101( 0x00140400 ) /* Snoop Reg. */
-
-#if LANGUAGE == C
-#define SKCR (*((volatile Word *) SA1101_p2v (_SKCR)))
-#define SMCR (*((volatile Word *) SA1101_p2v (_SMCR)))
-#define SNPR (*((volatile Word *) SA1101_p2v (_SNPR)))
-
-#define SKCR_PLLEn 0x0001 /* Enable On-Chip PLL */
-#define SKCR_BCLKEn 0x0002 /* Enables BCLK */
-#define SKCR_Sleep 0x0004 /* Sleep Mode */
-#define SKCR_IRefEn 0x0008 /* DAC Iref input enable */
-#define SKCR_VCOON 0x0010 /* VCO bias */
-#define SKCR_ScanTestEn 0x0020 /* Enables scan test */
-#define SKCR_ClockTestEn 0x0040 /* Enables clock test */
-
-#define SMCR_DCAC Fld(2,0) /* Number of column address bits */
-#define SMCR_DRAC Fld(2,2) /* Number of row address bits */
-#define SMCR_ArbiterBias 0x0008 /* favor video or USB */
-#define SMCR_TopVidMem Fld(4,5) /* Top 4 bits of vidmem addr. */
-
-#define SMCR_ColAdrBits( x ) /* col. addr bits 8..11 */ \
- (( (x) - 8 ) << FShft (SMCR_DCAC))
-#define SMCR_RowAdrBits( x ) /* row addr bits 9..12 */\
- (( (x) - 9 ) << FShft (SMCR_DRAC))
-
-#define SNPR_VFBstart Fld(12,0) /* Video frame buffer addr */
-#define SNPR_VFBsize Fld(11,12) /* Video frame buffer size */
-#define SNPR_WholeBank (1 << 23) /* Whole bank bit */
-#define SNPR_BankSelect Fld(2,27) /* Bank select */
-#define SNPR_SnoopEn (1 << 31) /* Enable snoop operation */
-
-#define SNPR_Set_VFBsize( x ) /* set frame buffer size (in kb) */ \
- ( (x) << FShft (SNPR_VFBsize))
-#define SNPR_Select_Bank(x) /* select bank 0 or 1 */ \
- (( (x) + 1 ) << FShft (SNPR_BankSelect ))
-
-#endif /* LANGUAGE == C */
-
-/*
- * Video Memory Controller
- *
- * Registers
- * VMCCR Configuration register
- * VMCAR VMC address register
- * VMCDR VMC data register
- *
- */
-
-#define _VMCCR _SA1101( 0x00100000 ) /* Configuration register */
-#define _VMCAR _SA1101( 0x00101000 ) /* VMC address register */
-#define _VMCDR _SA1101( 0x00101400 ) /* VMC data register */
-
-#if LANGUAGE == C
-#define VMCCR (*((volatile Word *) SA1101_p2v (_VMCCR)))
-#define VMCAR (*((volatile Word *) SA1101_p2v (_VMCAR)))
-#define VMCDR (*((volatile Word *) SA1101_p2v (_VMCDR)))
-
-#define VMCCR_RefreshEn 0x0000 /* Enable memory refresh */
-#define VMCCR_Config 0x0001 /* DRAM size */
-#define VMCCR_RefPeriod Fld(2,3) /* Refresh period */
-#define VMCCR_StaleDataWait Fld(4,5) /* Stale FIFO data timeout counter */
-#define VMCCR_SleepState (1<<9) /* State of interface pins in sleep*/
-#define VMCCR_RefTest (1<<10) /* refresh test */
-#define VMCCR_RefLow Fld(6,11) /* refresh low counter */
-#define VMCCR_RefHigh Fld(7,17) /* refresh high counter */
-#define VMCCR_SDTCTest Fld(7,24) /* stale data timeout counter */
-#define VMCCR_ForceSelfRef (1<<31) /* Force self refresh */
-
-#endif LANGUAGE == C
-
-
-/* Update FIFO
- *
- * Registers
- * UFCR Update FIFO Control Register
- * UFSR Update FIFO Status Register
- * UFLVLR update FIFO level register
- * UFDR update FIFO data register
- */
-
-#define _UFCR _SA1101(0x00120000) /* Update FIFO Control Reg. */
-#define _UFSR _SA1101(0x00120400) /* Update FIFO Status Reg. */
-#define _UFLVLR _SA1101(0x00120800) /* Update FIFO level reg. */
-#define _UFDR _SA1101(0x00120c00) /* Update FIFO data reg. */
-
-#if LANGUAGE == C
-
-#define UFCR (*((volatile Word *) SA1101_p2v (_UFCR)))
-#define UFSR (*((volatile Word *) SA1101_p2v (_UFSR)))
-#define UFLVLR (*((volatile Word *) SA1101_p2v (_UFLVLR)))
-#define UFDR (*((volatile Word *) SA1101_p2v (_UFDR)))
-
-
-#define UFCR_FifoThreshhold Fld(7,0) /* Level for FifoGTn flag */
-
-#define UFSR_FifoGTnFlag 0x01 /* FifoGTn flag */#define UFSR_FifoEmpty 0x80 /* FIFO is empty */
-
-#endif /* LANGUAGE == C */
-
-/* System Controller
- *
- * Registers
- * SKPCR Power Control Register
- * SKCDR Clock Divider Register
- * DACDR1 DAC1 Data register
- * DACDR2 DAC2 Data register
- */
-
-#define _SKPCR _SA1101(0x00000400)
-#define _SKCDR _SA1101(0x00040000)
-#define _DACDR1 _SA1101(0x00060000)
-#define _DACDR2 _SA1101(0x00060400)
-
-#if LANGUAGE == C
-#define SKPCR (*((volatile Word *) SA1101_p2v (_SKPCR)))
-#define SKCDR (*((volatile Word *) SA1101_p2v (_SKCDR)))
-#define DACDR1 (*((volatile Word *) SA1101_p2v (_DACDR1)))
-#define DACDR2 (*((volatile Word *) SA1101_p2v (_DACDR2)))
-
-#define SKPCR_UCLKEn 0x01 /* USB Enable */
-#define SKPCR_PCLKEn 0x02 /* PS/2 Enable */
-#define SKPCR_ICLKEn 0x04 /* Interrupt Controller Enable */
-#define SKPCR_VCLKEn 0x08 /* Video Controller Enable */
-#define SKPCR_PICLKEn 0x10 /* parallel port Enable */
-#define SKPCR_DCLKEn 0x20 /* DACs Enable */
-#define SKPCR_nKPADEn 0x40 /* Multiplexer */
-
-#define SKCDR_PLLMul Fld(7,0) /* PLL Multiplier */
-#define SKCDR_VCLKEn Fld(2,7) /* Video controller clock divider */
-#define SKDCR_BCLKEn (1<<9) /* BCLK Divider */
-#define SKDCR_UTESTCLKEn (1<<10) /* Route USB clock during test mode */
-#define SKDCR_DivRValue Fld(6,11) /* Input clock divider for PLL */
-#define SKDCR_DivNValue Fld(5,17) /* Output clock divider for PLL */
-#define SKDCR_PLLRSH Fld(3,22) /* PLL bandwidth control */
-#define SKDCR_ChargePump (1<<25) /* Charge pump control */
-#define SKDCR_ClkTestMode (1<<26) /* Clock output test mode */
-#define SKDCR_ClkTestEn (1<<27) /* Test clock generator */
-#define SKDCR_ClkJitterCntl Fld(3,28) /* video clock jitter compensation */
-
-#define DACDR_DACCount Fld(8,0) /* Count value */
-#define DACDR1_DACCount DACDR_DACCount
-#define DACDR2_DACCount DACDR_DACCount
-
-#endif /* LANGUAGE == C */
-
-/*
- * Parallel Port Interface
- *
- * Registers
- * IEEE_Config IEEE mode selection and programmable attributes
- * IEEE_Control Controls the states of IEEE port control outputs
- * IEEE_Data Forward transfer data register
- * IEEE_Addr Forward transfer address register
- * IEEE_Status Port IO signal status register
- * IEEE_IntStatus Port interrupts status register
- * IEEE_FifoLevels Rx and Tx FIFO interrupt generation levels
- * IEEE_InitTime Forward timeout counter initial value
- * IEEE_TimerStatus Forward timeout counter current value
- * IEEE_FifoReset Reset forward transfer FIFO
- * IEEE_ReloadValue Counter reload value
- * IEEE_TestControl Control testmode
- * IEEE_TestDataIn Test data register
- * IEEE_TestDataInEn Enable test data
- * IEEE_TestCtrlIn Test control signals
- * IEEE_TestCtrlInEn Enable test control signals
- * IEEE_TestDataStat Current data bus value
- *
- */
-
-/*
- * The control registers are defined as offsets from a base address
- */
-
-#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
-
-#define _IEEE_Config _IEEE( 0x0000 )
-#define _IEEE_Control _IEEE( 0x0400 )
-#define _IEEE_Data _IEEE( 0x4000 )
-#define _IEEE_Addr _IEEE( 0x0800 )
-#define _IEEE_Status _IEEE( 0x0c00 )
-#define _IEEE_IntStatus _IEEE( 0x1000 )
-#define _IEEE_FifoLevels _IEEE( 0x1400 )
-#define _IEEE_InitTime _IEEE( 0x1800 )
-#define _IEEE_TimerStatus _IEEE( 0x1c00 )
-#define _IEEE_FifoReset _IEEE( 0x2000 )
-#define _IEEE_ReloadValue _IEEE( 0x3c00 )
-#define _IEEE_TestControl _IEEE( 0x2400 )
-#define _IEEE_TestDataIn _IEEE( 0x2800 )
-#define _IEEE_TestDataInEn _IEEE( 0x2c00 )
-#define _IEEE_TestCtrlIn _IEEE( 0x3000 )
-#define _IEEE_TestCtrlInEn _IEEE( 0x3400 )
-#define _IEEE_TestDataStat _IEEE( 0x3800 )
-
-
-#if LANGUAGE == C
-#define IEEE_Config (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
-#define IEEE_Control (*((volatile Word *) SA1101_p2v (_IEEE_Control)))
-#define IEEE_Data (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
-#define IEEE_Addr (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
-#define IEEE_Status (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
-#define IEEE_IntStatus (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus)))
-#define IEEE_FifoLevels (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels)))
-#define IEEE_InitTime (*((volatile Word *) SA1101_p2v (_IEEE_InitTime)))
-#define IEEE_TimerStatus (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus)))
-#define IEEE_FifoReset (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset)))
-#define IEEE_ReloadValue (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue)))
-#define IEEE_TestControl (*((volatile Word *) SA1101_p2v (_IEEE_TestControl)))
-#define IEEE_TestDataIn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn)))
-#define IEEE_TestDataInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn)))
-#define IEEE_TestCtrlIn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn)))
-#define IEEE_TestCtrlInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn)))
-#define IEEE_TestDataStat (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat)))
-
-
-#define IEEE_Config_M Fld(3,0) /* Mode select */
-#define IEEE_Config_D 0x04 /* FIFO access enable */
-#define IEEE_Config_B 0x08 /* 9-bit word enable */
-#define IEEE_Config_T 0x10 /* Data transfer enable */
-#define IEEE_Config_A 0x20 /* Data transfer direction */
-#define IEEE_Config_E 0x40 /* Timer enable */
-#define IEEE_Control_A 0x08 /* AutoFd output */
-#define IEEE_Control_E 0x04 /* Selectin output */
-#define IEEE_Control_T 0x02 /* Strobe output */
-#define IEEE_Control_I 0x01 /* Port init output */
-#define IEEE_Data_C (1<<31) /* Byte count */
-#define IEEE_Data_Db Fld(9,16) /* Data byte 2 */
-#define IEEE_Data_Da Fld(9,0) /* Data byte 1 */
-#define IEEE_Addr_A Fld(8,0) /* forward address transfer byte */
-#define IEEE_Status_A 0x0100 /* nAutoFd port output status */
-#define IEEE_Status_E 0x0080 /* nSelectIn port output status */
-#define IEEE_Status_T 0x0040 /* nStrobe port output status */
-#define IEEE_Status_I 0x0020 /* nInit port output status */
-#define IEEE_Status_B 0x0010 /* Busy port inout status */
-#define IEEE_Status_S 0x0008 /* Select port input status */
-#define IEEE_Status_K 0x0004 /* nAck port input status */
-#define IEEE_Status_F 0x0002 /* nFault port input status */
-#define IEEE_Status_R 0x0001 /* pError port input status */
-
-#define IEEE_IntStatus_IntReqDat 0x0100
-#define IEEE_IntStatus_IntReqEmp 0x0080
-#define IEEE_IntStatus_IntReqInt 0x0040
-#define IEEE_IntStatus_IntReqRav 0x0020
-#define IEEE_IntStatus_IntReqTim 0x0010
-#define IEEE_IntStatus_RevAddrComp 0x0008
-#define IEEE_IntStatus_RevDataComp 0x0004
-#define IEEE_IntStatus_FwdAddrComp 0x0002
-#define IEEE_IntStatus_FwdDataComp 0x0001
-#define IEEE_FifoLevels_RevFifoLevel 2
-#define IEEE_FifoLevels_FwdFifoLevel 1
-#define IEEE_InitTime_TimValInit Fld(22,0)
-#define IEEE_TimerStatus_TimValStat Fld(22,0)
-#define IEEE_ReloadValue_Reload Fld(4,0)
-
-#define IEEE_TestControl_RegClk 0x04
-#define IEEE_TestControl_ClockSelect Fld(2,1)
-#define IEEE_TestControl_TimerTestModeEn 0x01
-#define IEEE_TestCtrlIn_PError 0x10
-#define IEEE_TestCtrlIn_nFault 0x08
-#define IEEE_TestCtrlIn_nAck 0x04
-#define IEEE_TestCtrlIn_PSel 0x02
-#define IEEE_TestCtrlIn_Busy 0x01
-
-#endif /* LANGUAGE == C */
-
-/*
- * VGA Controller
- *
- * Registers
- * VideoControl Video Control Register
- * VgaTiming0 VGA Timing Register 0
- * VgaTiming1 VGA Timing Register 1
- * VgaTiming2 VGA Timing Register 2
- * VgaTiming3 VGA Timing Register 3
- * VgaBorder VGA Border Color Register
- * VgaDBAR VGADMA Base Address Register
- * VgaDCAR VGADMA Channel Current Address Register
- * VgaStatus VGA Status Register
- * VgaInterruptMask VGA Interrupt Mask Register
- * VgaPalette VGA Palette Registers
- * DacControl DAC Control Register
- * VgaTest VGA Controller Test Register
- */
-
-#define _VGA( x ) _SA1101( ( x ) + __VGA_CONTROL )
-
-#define _VideoControl _VGA( 0x0000 )
-#define _VgaTiming0 _VGA( 0x0400 )
-#define _VgaTiming1 _VGA( 0x0800 )
-#define _VgaTiming2 _VGA( 0x0c00 )
-#define _VgaTiming3 _VGA( 0x1000 )
-#define _VgaBorder _VGA( 0x1400 )
-#define _VgaDBAR _VGA( 0x1800 )
-#define _VgaDCAR _VGA( 0x1c00 )
-#define _VgaStatus _VGA( 0x2000 )
-#define _VgaInterruptMask _VGA( 0x2400 )
-#define _VgaPalette _VGA( 0x40000 )
-#define _DacControl _VGA( 0x3000 )
-#define _VgaTest _VGA( 0x2c00 )
-
-#if (LANGUAGE == C)
-#define VideoControl (*((volatile Word *) SA1101_p2v (_VideoControl)))
-#define VgaTiming0 (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
-#define VgaTiming1 (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
-#define VgaTiming2 (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
-#define VgaTiming3 (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
-#define VgaBorder (*((volatile Word *) SA1101_p2v (_VgaBorder)))
-#define VgaDBAR (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
-#define VgaDCAR (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
-#define VgaStatus (*((volatile Word *) SA1101_p2v (_VgaStatus)))
-#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask)))
-#define VgaPalette (*((volatile Word *) SA1101_p2v (_VgaPalette)))
-#define DacControl (*((volatile Word *) SA1101_p2v (_DacControl)))
-#define VgaTest (*((volatile Word *) SA1101_p2v (_VgaTest)))
-
-#define VideoControl_VgaEn 0x00000000
-#define VideoControl_BGR 0x00000001
-#define VideoControl_VCompVal Fld(2,2)
-#define VideoControl_VgaReq Fld(4,4)
-#define VideoControl_VBurstL Fld(4,8)
-#define VideoControl_VMode (1<<12)
-#define VideoControl_PalRead (1<<13)
-
-#define VgaTiming0_PPL Fld(6,2)
-#define VgaTiming0_HSW Fld(8,8)
-#define VgaTiming0_HFP Fld(8,16)
-#define VgaTiming0_HBP Fld(8,24)
-
-#define VgaTiming1_LPS Fld(10,0)
-#define VgaTiming1_VSW Fld(6,10)
-#define VgaTiming1_VFP Fld(8,16)
-#define VgaTiming1_VBP Fld(8,24)
-
-#define VgaTiming2_IVS 0x01
-#define VgaTiming2_IHS 0x02
-#define VgaTiming2_CVS 0x04
-#define VgaTiming2_CHS 0x08
-
-#define VgaTiming3_HBS Fld(8,0)
-#define VgaTiming3_HBE Fld(8,8)
-#define VgaTiming3_VBS Fld(8,16)
-#define VgaTiming3_VBE Fld(8,24)
-
-#define VgaBorder_BCOL Fld(24,0)
-
-#define VgaStatus_VFUF 0x01
-#define VgaStatus_VNext 0x02
-#define VgaStatus_VComp 0x04
-
-#define VgaInterruptMask_VFUFMask 0x00
-#define VgaInterruptMask_VNextMask 0x01
-#define VgaInterruptMask_VCompMask 0x02
-
-#define VgaPalette_R Fld(8,0)
-#define VgaPalette_G Fld(8,8)
-#define VgaPalette_B Fld(8,16)
-
-#define DacControl_DACON 0x0001
-#define DacControl_COMPON 0x0002
-#define DacControl_PEDON 0x0004
-#define DacControl_RTrim Fld(5,4)
-#define DacControl_GTrim Fld(5,9)
-#define DacControl_BTrim Fld(5,14)
-
-#define VgaTest_TDAC 0x00
-#define VgaTest_Datatest Fld(4,1)
-#define VgaTest_DACTESTDAC 0x10
-#define VgaTest_DACTESTOUT Fld(3,5)
-
-#endif /* LANGUAGE == C */
-
-/*
- * USB Host Interface Controller
- *
- * Registers
- * Revision
- * Control
- * CommandStatus
- * InterruptStatus
- * InterruptEnable
- * HCCA
- * PeriodCurrentED
- * ControlHeadED
- * BulkHeadED
- * BulkCurrentED
- * DoneHead
- * FmInterval
- * FmRemaining
- * FmNumber
- * PeriodicStart
- * LSThreshold
- * RhDescriptorA
- * RhDescriptorB
- * RhStatus
- * RhPortStatus
- * USBStatus
- * USBReset
- * USTAR
- * USWER
- * USRFR
- * USNFR
- * USTCSR
- * USSR
- *
- */
-
-#define _USB( x ) _SA1101( ( x ) + __USB_CONTROL )
-
-
-#define _Revision _USB( 0x0000 )
-#define _Control _USB( 0x0888 )
-#define _CommandStatus _USB( 0x0c00 )
-#define _InterruptStatus _USB( 0x1000 )
-#define _InterruptEnable _USB( 0x1400 )
-#define _HCCA _USB( 0x1800 )
-#define _PeriodCurrentED _USB( 0x1c00 )
-#define _ControlHeadED _USB( 0x2000 )
-#define _BulkHeadED _USB( 0x2800 )
-#define _BulkCurrentED _USB( 0x2c00 )
-#define _DoneHead _USB( 0x3000 )
-#define _FmInterval _USB( 0x3400 )
-#define _FmRemaining _USB( 0x3800 )
-#define _FmNumber _USB( 0x3c00 )
-#define _PeriodicStart _USB( 0x4000 )
-#define _LSThreshold _USB( 0x4400 )
-#define _RhDescriptorA _USB( 0x4800 )
-#define _RhDescriptorB _USB( 0x4c00 )
-#define _RhStatus _USB( 0x5000 )
-#define _RhPortStatus _USB( 0x5400 )
-#define _USBStatus _USB( 0x11800 )
-#define _USBReset _USB( 0x11c00 )
-
-#define _USTAR _USB( 0x10400 )
-#define _USWER _USB( 0x10800 )
-#define _USRFR _USB( 0x10c00 )
-#define _USNFR _USB( 0x11000 )
-#define _USTCSR _USB( 0x11400 )
-#define _USSR _USB( 0x11800 )
-
-
-#if (LANGUAGE == C)
-
-#define Revision (*((volatile Word *) SA1101_p2v (_Revision)))
-#define Control (*((volatile Word *) SA1101_p2v (_Control)))
-#define CommandStatus (*((volatile Word *) SA1101_p2v (_CommandStatus)))
-#define InterruptStatus (*((volatile Word *) SA1101_p2v (_InterruptStatus)))
-#define InterruptEnable (*((volatile Word *) SA1101_p2v (_InterruptEnable)))
-#define HCCA (*((volatile Word *) SA1101_p2v (_HCCA)))
-#define PeriodCurrentED (*((volatile Word *) SA1101_p2v (_PeriodCurrentED)))
-#define ControlHeadED (*((volatile Word *) SA1101_p2v (_ControlHeadED)))
-#define BulkHeadED (*((volatile Word *) SA1101_p2v (_BulkHeadED)))
-#define BulkCurrentED (*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
-#define DoneHead (*((volatile Word *) SA1101_p2v (_DoneHead)))
-#define FmInterval (*((volatile Word *) SA1101_p2v (_FmInterval)))
-#define FmRemaining (*((volatile Word *) SA1101_p2v (_FmRemaining)))
-#define FmNumber (*((volatile Word *) SA1101_p2v (_FmNumber)))
-#define PeriodicStart (*((volatile Word *) SA1101_p2v (_PeriodicStart)))
-#define LSThreshold (*((volatile Word *) SA1101_p2v (_LSThreshold)))
-#define RhDescriptorA (*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
-#define RhDescriptorB (*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
-#define RhStatus (*((volatile Word *) SA1101_p2v (_RhStatus)))
-#define RhPortStatus (*((volatile Word *) SA1101_p2v (_RhPortStatus)))
-#define USBStatus (*((volatile Word *) SA1101_p2v (_USBStatus)))
-#define USBReset (*((volatile Word *) SA1101_p2v (_USBReset)))
-#define USTAR (*((volatile Word *) SA1101_p2v (_USTAR)))
-#define USWER (*((volatile Word *) SA1101_p2v (_USWER)))
-#define USRFR (*((volatile Word *) SA1101_p2v (_USRFR)))
-#define USNFR (*((volatile Word *) SA1101_p2v (_USNFR)))
-#define USTCSR (*((volatile Word *) SA1101_p2v (_USTCSR)))
-#define USSR (*((volatile Word *) SA1101_p2v (_USSR)))
-
-
-#define USBStatus_IrqHciRmtWkp (1<<7)
-#define USBStatus_IrqHciBuffAcc (1<<8)
-#define USBStatus_nIrqHciM (1<<9)
-#define USBStatus_nHciMFClr (1<<10)
-
-#define USBReset_ForceIfReset 0x01
-#define USBReset_ForceHcReset 0x02
-#define USBReset_ClkGenReset 0x04
-
-#define USTCR_RdBstCntrl Fld(3,0)
-#define USTCR_ByteEnable Fld(4,3)
-#define USTCR_WriteEn (1<<7)
-#define USTCR_FifoCir (1<<8)
-#define USTCR_TestXferSel (1<<9)
-#define USTCR_FifoCirAtEnd (1<<10)
-#define USTCR_nSimScaleDownClk (1<<11)
-
-#define USSR_nAppMDEmpty 0x01
-#define USSR_nAppMDFirst 0x02
-#define USSR_nAppMDLast 0x04
-#define USSR_nAppMDFull 0x08
-#define USSR_nAppMAFull 0x10
-#define USSR_XferReq 0x20
-#define USSR_XferEnd 0x40
-
-#endif /* LANGUAGE == C */
-
-
-/*
- * Interrupt Controller
- *
- * Registers
- * INTTEST0 Test register 0
- * INTTEST1 Test register 1
- * INTENABLE0 Interrupt Enable register 0
- * INTENABLE1 Interrupt Enable register 1
- * INTPOL0 Interrupt Polarity selection 0
- * INTPOL1 Interrupt Polarity selection 1
- * INTTSTSEL Interrupt source selection
- * INTSTATCLR0 Interrupt Status 0
- * INTSTATCLR1 Interrupt Status 1
- * INTSET0 Interrupt Set 0
- * INTSET1 Interrupt Set 1
- */
-
-#define _INT( x ) _SA1101( ( x ) + __INTERRUPT_CONTROL)
-
-#define _INTTEST0 _INT( 0x1000 )
-#define _INTTEST1 _INT( 0x1400 )
-#define _INTENABLE0 _INT( 0x2000 )
-#define _INTENABLE1 _INT( 0x2400 )
-#define _INTPOL0 _INT( 0x3000 )
-#define _INTPOL1 _INT( 0x3400 )
-#define _INTTSTSEL _INT( 0x5000 )
-#define _INTSTATCLR0 _INT( 0x6000 )
-#define _INTSTATCLR1 _INT( 0x6400 )
-#define _INTSET0 _INT( 0x7000 )
-#define _INTSET1 _INT( 0x7400 )
-
-#if ( LANGUAGE == C )
-#define INTTEST0 (*((volatile Word *) SA1101_p2v (_INTTEST0)))
-#define INTTEST1 (*((volatile Word *) SA1101_p2v (_INTTEST1)))
-#define INTENABLE0 (*((volatile Word *) SA1101_p2v (_INTENABLE0)))
-#define INTENABLE1 (*((volatile Word *) SA1101_p2v (_INTENABLE1)))
-#define INTPOL0 (*((volatile Word *) SA1101_p2v (_INTPOL0)))
-#define INTPOL1 (*((volatile Word *) SA1101_p2v (_INTPOL1)))
-#define INTTSTSEL (*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
-#define INTSTATCLR0 (*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
-#define INTSTATCLR1 (*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
-#define INTSET0 (*((volatile Word *) SA1101_p2v (_INTSET0)))
-#define INTSET1 (*((volatile Word *) SA1101_p2v (_INTSET1)))
-
-#endif /* LANGUAGE == C */
-
-/*
- * PS/2 Trackpad and Mouse Interfaces
- *
- * Registers (prefix kbd applies to trackpad interface, mse to mouse)
- * KBDCR Control Register
- * KBDSTAT Status Register
- * KBDDATA Transmit/Receive Data register
- * KBDCLKDIV Clock Division Register
- * KBDPRECNT Clock Precount Register
- * KBDTEST1 Test register 1
- * KBDTEST2 Test register 2
- * KBDTEST3 Test register 3
- * KBDTEST4 Test register 4
- * MSECR
- * MSESTAT
- * MSEDATA
- * MSECLKDIV
- * MSEPRECNT
- * MSETEST1
- * MSETEST2
- * MSETEST3
- * MSETEST4
- *
- */
-
-#define _KBD( x ) _SA1101( ( x ) + __TRACK_INTERFACE )
-#define _MSE( x ) _SA1101( ( x ) + __MOUSE_INTERFACE )
-
-#define _KBDCR _KBD( 0x0000 )
-#define _KBDSTAT _KBD( 0x0400 )
-#define _KBDDATA _KBD( 0x0800 )
-#define _KBDCLKDIV _KBD( 0x0c00 )
-#define _KBDPRECNT _KBD( 0x1000 )
-#define _KBDTEST1 _KBD( 0x2000 )
-#define _KBDTEST2 _KBD( 0x2400 )
-#define _KBDTEST3 _KBD( 0x2800 )
-#define _KBDTEST4 _KBD( 0x2c00 )
-#define _MSECR _MSE( 0x0000 )
-#define _MSESTAT _MSE( 0x0400 )
-#define _MSEDATA _MSE( 0x0800 )
-#define _MSECLKDIV _MSE( 0x0c00 )
-#define _MSEPRECNT _MSE( 0x1000 )
-#define _MSETEST1 _MSE( 0x2000 )
-#define _MSETEST2 _MSE( 0x2400 )
-#define _MSETEST3 _MSE( 0x2800 )
-#define _MSETEST4 _MSE( 0x2c00 )
-
-#if ( LANGUAGE == C )
-
-#define KBDCR (*((volatile Word *) SA1101_p2v (_KBDCR)))
-#define KBDSTAT (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
-#define KBDDATA (*((volatile Word *) SA1101_p2v (_KBDDATA)))
-#define KBDCLKDIV (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
-#define KBDPRECNT (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
-#define KBDTEST1 (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
-#define KBDTEST2 (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
-#define KBDTEST3 (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
-#define KBDTEST4 (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
-#define MSECR (*((volatile Word *) SA1101_p2v (_MSECR)))
-#define MSESTAT (*((volatile Word *) SA1101_p2v (_MSESTAT)))
-#define MSEDATA (*((volatile Word *) SA1101_p2v (_MSEDATA)))
-#define MSECLKDIV (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
-#define MSEPRECNT (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
-#define MSETEST1 (*((volatile Word *) SA1101_p2v (_MSETEST1)))
-#define MSETEST2 (*((volatile Word *) SA1101_p2v (_MSETEST2)))
-#define MSETEST3 (*((volatile Word *) SA1101_p2v (_MSETEST3)))
-#define MSETEST4 (*((volatile Word *) SA1101_p2v (_MSETEST4)))
-
-
-#define KBDCR_ENA 0x08
-#define KBDCR_FKD 0x02
-#define KBDCR_FKC 0x01
-
-#define KBDSTAT_TXE 0x80
-#define KBDSTAT_TXB 0x40
-#define KBDSTAT_RXF 0x20
-#define KBDSTAT_RXB 0x10
-#define KBDSTAT_ENA 0x08
-#define KBDSTAT_RXP 0x04
-#define KBDSTAT_KBD 0x02
-#define KBDSTAT_KBC 0x01
-
-#define KBDCLKDIV_DivVal Fld(4,0)
-
-#define MSECR_ENA 0x08
-#define MSECR_FKD 0x02
-#define MSECR_FKC 0x01
-
-#define MSESTAT_TXE 0x80
-#define MSESTAT_TXB 0x40
-#define MSESTAT_RXF 0x20
-#define MSESTAT_RXB 0x10
-#define MSESTAT_ENA 0x08
-#define MSESTAT_RXP 0x04
-#define MSESTAT_MSD 0x02
-#define MSESTAT_MSC 0x01
-
-#define MSECLKDIV_DivVal Fld(4,0)
-
-#define KBDTEST1_CD 0x80
-#define KBDTEST1_RC1 0x40
-#define KBDTEST1_MC 0x20
-#define KBDTEST1_C Fld(2,3)
-#define KBDTEST1_T2 0x40
-#define KBDTEST1_T1 0x20
-#define KBDTEST1_T0 0x10
-#define KBDTEST2_TICBnRES 0x08
-#define KBDTEST2_RKC 0x04
-#define KBDTEST2_RKD 0x02
-#define KBDTEST2_SEL 0x01
-#define KBDTEST3_ms_16 0x80
-#define KBDTEST3_us_64 0x40
-#define KBDTEST3_us_16 0x20
-#define KBDTEST3_DIV8 0x10
-#define KBDTEST3_DIn 0x08
-#define KBDTEST3_CIn 0x04
-#define KBDTEST3_KD 0x02
-#define KBDTEST3_KC 0x01
-#define KBDTEST4_BC12 0x80
-#define KBDTEST4_BC11 0x40
-#define KBDTEST4_TRES 0x20
-#define KBDTEST4_CLKOE 0x10
-#define KBDTEST4_CRES 0x08
-#define KBDTEST4_RXB 0x04
-#define KBDTEST4_TXB 0x02
-#define KBDTEST4_SRX 0x01
-
-#define MSETEST1_CD 0x80
-#define MSETEST1_RC1 0x40
-#define MSETEST1_MC 0x20
-#define MSETEST1_C Fld(2,3)
-#define MSETEST1_T2 0x40
-#define MSETEST1_T1 0x20
-#define MSETEST1_T0 0x10
-#define MSETEST2_TICBnRES 0x08
-#define MSETEST2_RKC 0x04
-#define MSETEST2_RKD 0x02
-#define MSETEST2_SEL 0x01
-#define MSETEST3_ms_16 0x80
-#define MSETEST3_us_64 0x40
-#define MSETEST3_us_16 0x20
-#define MSETEST3_DIV8 0x10
-#define MSETEST3_DIn 0x08
-#define MSETEST3_CIn 0x04
-#define MSETEST3_KD 0x02
-#define MSETEST3_KC 0x01
-#define MSETEST4_BC12 0x80
-#define MSETEST4_BC11 0x40
-#define MSETEST4_TRES 0x20
-#define MSETEST4_CLKOE 0x10
-#define MSETEST4_CRES 0x08
-#define MSETEST4_RXB 0x04
-#define MSETEST4_TXB 0x02
-#define MSETEST4_SRX 0x01
-
-#endif /* LANGUAGE == C */
-
-
-/*
- * General-Purpose I/O Interface
- *
- * Registers
- * PADWR Port A Data Write Register
- * PBDWR Port B Data Write Register
- * PADRR Port A Data Read Register
- * PBDRR Port B Data Read Register
- * PADDR Port A Data Direction Register
- * PBDDR Port B Data Direction Register
- * PASSR Port A Sleep State Register
- * PBSSR Port B Sleep State Register
- *
- */
-
-#define _PIO( x ) _SA1101( ( x ) + __GPIO_INTERFACE )
-
-#define _PADWR _PIO( 0x0000 )
-#define _PBDWR _PIO( 0x0400 )
-#define _PADRR _PIO( 0x0000 )
-#define _PBDRR _PIO( 0x0400 )
-#define _PADDR _PIO( 0x0800 )
-#define _PBDDR _PIO( 0x0c00 )
-#define _PASSR _PIO( 0x1000 )
-#define _PBSSR _PIO( 0x1400 )
-
-
-#if ( LANGUAGE == C )
-
-
-#define PADWR (*((volatile Word *) SA1101_p2v (_PADWR)))
-#define PBDWR (*((volatile Word *) SA1101_p2v (_PBDWR)))
-#define PADRR (*((volatile Word *) SA1101_p2v (_PADRR)))
-#define PBDRR (*((volatile Word *) SA1101_p2v (_PBDRR)))
-#define PADDR (*((volatile Word *) SA1101_p2v (_PADDR)))
-#define PBDDR (*((volatile Word *) SA1101_p2v (_PBDDR)))
-#define PASSR (*((volatile Word *) SA1101_p2v (_PASSR)))
-#define PBSSR (*((volatile Word *) SA1101_p2v (_PBSSR)))
-
-#endif
-
-
-
-/*
- * Keypad Interface
- *
- * Registers
- * PXDWR
- * PXDRR
- * PYDWR
- * PYDRR
- *
- */
-
-#define _KEYPAD( x ) _SA1101( ( x ) + __KEYPAD_INTERFACE )
-
-#define _PXDWR _KEYPAD( 0x0000 )
-#define _PXDRR _KEYPAD( 0x0000 )
-#define _PYDWR _KEYPAD( 0x0400 )
-#define _PYDRR _KEYPAD( 0x0400 )
-
-#if ( LANGUAGE == C )
-
-
-#define PXDWR (*((volatile Word *) SA1101_p2v (_PXDWR)))
-#define PXDRR (*((volatile Word *) SA1101_p2v (_PXDRR)))
-#define PYDWR (*((volatile Word *) SA1101_p2v (_PYDWR)))
-#define PYDRR (*((volatile Word *) SA1101_p2v (_PYDRR)))
-
-#endif
-
-
-
-/*
- * PCMCIA Interface
- *
- * Registers
- * PCSR Status Register
- * PCCR Control Register
- * PCSSR Sleep State Register
- *
- */
-
-#define _CARD( x ) _SA1101( ( x ) + __PCMCIA_INTERFACE )
-
-#define _PCSR _CARD( 0x0000 )
-#define _PCCR _CARD( 0x0400 )
-#define _PCSSR _CARD( 0x0800 )
-
-#if ( LANGUAGE == C )
-#define PCSR (*((volatile Word *) SA1101_p2v (_PCSR)))
-#define PCCR (*((volatile Word *) SA1101_p2v (_PCCR)))
-#define PCSSR (*((volatile Word *) SA1101_p2v (_PCSSR)))
-
-#define PCSR_S0_ready 0x0001
-#define PCSR_S1_ready 0x0002
-#define PCSR_S0_detected 0x0004
-#define PCSR_S1_detected 0x0008
-#define PCSR_S0_VS1 0x0010
-#define PCSR_S0_VS2 0x0020
-#define PCSR_S1_VS1 0x0040
-#define PCSR_S1_VS2 0x0080
-#define PCSR_S0_WP 0x0100
-#define PCSR_S1_WP 0x0200
-#define PCSR_S0_BVD1_nSTSCHG 0x0400
-#define PCSR_S0_BVD2_nSPKR 0x0800
-#define PCSR_S1_BVD1_nSTSCHG 0x1000
-#define PCSR_S1_BVD2_nSPKR 0x2000
-
-#define PCCR_S0_VPP0 0x0001
-#define PCCR_S0_VPP1 0x0002
-#define PCCR_S0_VCC0 0x0004
-#define PCCR_S0_VCC1 0x0008
-#define PCCR_S1_VPP0 0x0010
-#define PCCR_S1_VPP1 0x0020
-#define PCCR_S1_VCC0 0x0040
-#define PCCR_S1_VCC1 0x0080
-#define PCCR_S0_reset 0x0100
-#define PCCR_S1_reset 0x0200
-#define PCCR_S0_float 0x0400
-#define PCCR_S1_float 0x0800
-
-#define PCSSR_S0_VCC0 0x0001
-#define PCSSR_S0_VCC1 0x0002
-#define PCSSR_S0_VPP0 0x0004
-#define PCSSR_S0_VPP1 0x0008
-#define PCSSR_S0_control 0x0010
-#define PCSSR_S1_VCC0 0x0020
-#define PCSSR_S1_VCC1 0x0040
-#define PCSSR_S1_VPP0 0x0080
-#define PCSSR_S1_VPP1 0x0100
-#define PCSSR_S1_control 0x0200
-
-#endif
-
-#undef C
-#undef Assembly
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
index cbedd75a9d65..4393634af25e 100644
--- a/arch/arm/mach-sa1100/include/mach/hardware.h
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -74,8 +74,4 @@ static inline unsigned long get_clock_tick_rate(void)

#include "SA-1100.h"

-#ifdef CONFIG_SA1101
-#include "SA-1101.h"
-#endif
-
#endif /* _ASM_ARCH_HARDWARE_H */
--
1.9.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/