[RFC][PATCH] CMA: drivers/base/Kconfig: restrict CMA size to non-zero value
From: Gioh Kim
Date: Fri May 16 2014 - 04:02:47 EST
Hi,
I've been trying to apply CMA into my platform.
USB host driver generated kernel panic like below when USB mouse is connected,
because I turned on CMA and set the CMA_SIZE_MBYTES value into zero by mistake.
I think the panic is cuased by atomic_pool in arch/arm/mm/dma-mapping.c.
Zero CMA_SIZE_MBYTES value skips CMA initialization and then atomic_pool is not initialized also
because __alloc_from_contiguous is failed in atomic_pool_init().
If CMA_SIZE_MBYTES_MAX is allowed to be zero, there should be defense code to check
CMA is initlaized correctly. And atomic_pool initialization should be done by __alloc_remap_buffer
instead of __alloc_from_contiguous if __alloc_from_contiguous is failed.
IMPO, it is more simple and powerful to restrict CMA_SIZE_MBYTES_MAX configuration to be larger than zero.
[ 1.474523] ------------[ cut here ]------------
[ 1.479150] WARNING: at arch/arm/mm/dma-mapping.c:496 __dma_alloc.isra.19+0x1b8/0x1e0()
[ 1.487160] coherent pool not initialised!
[ 1.491249] Modules linked in:
[ 1.494317] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.19+ #55
[ 1.500521] [<80013e20>] (unwind_backtrace+0x0/0xf8) from [<80011c60>] (show_stack+0x10/0x14)
[ 1.509064] [<80011c60>] (show_stack+0x10/0x14) from [<8001eedc>] (warn_slowpath_common+0x4c/0x6c)
[ 1.518038] [<8001eedc>] (warn_slowpath_common+0x4c/0x6c) from [<8001ef90>] (warn_slowpath_fmt+0x30/0x40)
[ 1.527616] [<8001ef90>] (warn_slowpath_fmt+0x30/0x40) from [<80017c28>] (__dma_alloc.isra.19+0x1b8/0x1e0)
[ 1.537282] [<80017c28>] (__dma_alloc.isra.19+0x1b8/0x1e0) from [<80017d7c>] (arm_dma_alloc+0x90/0x98)
[ 1.546608] [<80017d7c>] (arm_dma_alloc+0x90/0x98) from [<8034a860>] (ohci_init+0x1b0/0x278)
[ 1.555062] [<8034a860>] (ohci_init+0x1b0/0x278) from [<80332b0c>] (usb_add_hcd+0x184/0x5b8)
[ 1.563500] [<80332b0c>] (usb_add_hcd+0x184/0x5b8) from [<8034b5e0>] (ohci_platform_probe+0xd0/0x174)
[ 1.572729] [<8034b5e0>] (ohci_platform_probe+0xd0/0x174) from [<802f196c>] (platform_drv_probe+0x14/0x18)
[ 1.582401] [<802f196c>] (platform_drv_probe+0x14/0x18) from [<802f0714>] (driver_probe_device+0x6c/0x1f8)
[ 1.592064] [<802f0714>] (driver_probe_device+0x6c/0x1f8) from [<802f092c>] (__driver_attach+0x8c/0x90)
[ 1.601465] [<802f092c>] (__driver_attach+0x8c/0x90) from [<802eeec8>] (bus_for_each_dev+0x54/0x88)
[ 1.610518] [<802eeec8>] (bus_for_each_dev+0x54/0x88) from [<802efef0>] (bus_add_driver+0xd8/0x230)
[ 1.619572] [<802efef0>] (bus_add_driver+0xd8/0x230) from [<802f0de4>] (driver_register+0x78/0x14c)
[ 1.628632] [<802f0de4>] (driver_register+0x78/0x14c) from [<806ff018>] (ohci_hcd_mod_init+0x34/0x64)
[ 1.637859] [<806ff018>] (ohci_hcd_mod_init+0x34/0x64) from [<8000879c>] (do_one_initcall+0xec/0x14c)
[ 1.647088] [<8000879c>] (do_one_initcall+0xec/0x14c) from [<806dab30>] (kernel_init_freeable+0x150/0x220)
[ 1.656754] [<806dab30>] (kernel_init_freeable+0x150/0x220) from [<80509f54>] (kernel_init+0x8/0xf8)
[ 1.665895] [<80509f54>] (kernel_init+0x8/0xf8) from [<8000e398>] (ret_from_fork+0x14/0x3c)
[ 1.674264] ---[ end trace 6f1857db5ef45cb9 ]---
[ 1.678880] ohci-platform ohci-platform.0: can't setup
[ 1.684027] ohci-platform ohci-platform.0: USB bus 1 deregistered
[ 1.690362] ohci-platform: probe of ohci-platform.0 failed with error -12
[ 1.697188] ohci-platform ohci-platform.1: Generic Platform OHCI Controller
[ 1.704365] ohci-platform ohci-platform.1: new USB bus registered, assigned bus number 1
[ 1.712457] ------------[ cut here ]------------
[ 1.717096] WARNING: at arch/arm/mm/dma-mapping.c:496 __dma_alloc.isra.19+0x1b8/0x1e0()
[ 1.725105] coherent pool not initialised!
[ 1.729194] Modules linked in:
[ 1.732247] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.19+ #55
[ 1.739404] [<80013e20>] (unwind_backtrace+0x0/0xf8) from [<80011c60>] (show_stack+0x10/0x14)
[ 1.747949] [<80011c60>] (show_stack+0x10/0x14) from [<8001eedc>] (warn_slowpath_common+0x4c/0x6c)
[ 1.756923] [<8001eedc>] (warn_slowpath_common+0x4c/0x6c) from [<8001ef90>] (warn_slowpath_fmt+0x30/0x40)
[ 1.766502] [<8001ef90>] (warn_slowpath_fmt+0x30/0x40) from [<80017c28>] (__dma_alloc.isra.19+0x1b8/0x1e0)
[ 1.776168] [<80017c28>] (__dma_alloc.isra.19+0x1b8/0x1e0) from [<80017d7c>] (arm_dma_alloc+0x90/0x98)
[ 1.785484] [<80017d7c>] (arm_dma_alloc+0x90/0x98) from [<8034a860>] (ohci_init+0x1b0/0x278)
[ 1.793933] [<8034a860>] (ohci_init+0x1b0/0x278) from [<80332b0c>] (usb_add_hcd+0x184/0x5b8)
[ 1.802370] [<80332b0c>] (usb_add_hcd+0x184/0x5b8) from [<8034b5e0>] (ohci_platform_probe+0xd0/0x174)
[ 1.811597] [<8034b5e0>] (ohci_platform_probe+0xd0/0x174) from [<802f196c>] (platform_drv_probe+0x14/0x18)
[ 1.821263] [<802f196c>] (platform_drv_probe+0x14/0x18) from [<802f0714>] (driver_probe_device+0x6c/0x1f8)
[ 1.830926] [<802f0714>] (driver_probe_device+0x6c/0x1f8) from [<802f092c>] (__driver_attach+0x8c/0x90)
[ 1.840326] [<802f092c>] (__driver_attach+0x8c/0x90) from [<802eeec8>] (bus_for_each_dev+0x54/0x88)
[ 1.849379] [<802eeec8>] (bus_for_each_dev+0x54/0x88) from [<802efef0>] (bus_add_driver+0xd8/0x230)
[ 1.858432] [<802efef0>] (bus_add_driver+0xd8/0x230) from [<802f0de4>] (driver_register+0x78/0x14c)
[ 1.867488] [<802f0de4>] (driver_register+0x78/0x14c) from [<806ff018>] (ohci_hcd_mod_init+0x34/0x64)
[ 1.876714] [<806ff018>] (ohci_hcd_mod_init+0x34/0x64) from [<8000879c>] (do_one_initcall+0xec/0x14c)
[ 1.885940] [<8000879c>] (do_one_initcall+0xec/0x14c) from [<806dab30>] (kernel_init_freeable+0x150/0x220)
[ 1.895601] [<806dab30>] (kernel_init_freeable+0x150/0x220) from [<80509f54>] (kernel_init+0x8/0xf8)
[ 1.904741] [<80509f54>] (kernel_init+0x8/0xf8) from [<8000e398>] (ret_from_fork+0x14/0x3c)
[ 1.913085] ---[ end trace 6f1857db5ef45cba ]---
I'm adding my patch to restrict CMA_SIZE_MBYTES.
This patch is based on 3.15.0-rc5
-------------------------------- 8< --------------------------------------
From 9f8e6d3c1f4bdeeeb7af3df7898b773a612c62e8 Mon Sep 17 00:00:00 2001
From: Gioh Kim <gioh.kim@xxxxxxx>
Date: Fri, 16 May 2014 16:15:43 +0900
Subject: [PATCH] drivers/base/Kconfig: restrict CMA size to non-zero value
The size of CMA area must be larger than zero.
If the size is zero, CMA canno be initialized.
Signed-off-by: Gioh Kim <gioh.kim@xxxxx>
---
drivers/base/Kconfig | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 4b7b452..19b3578 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -222,13 +222,18 @@ config DMA_CMA
if DMA_CMA
comment "Default contiguous memory area size:"
+config CMA_SIZE_MBYTES_MAX
+ int
+ default 1024
+
config CMA_SIZE_MBYTES
int "Size in Mega Bytes"
depends on !CMA_SIZE_SEL_PERCENTAGE
+ range 1 CMA_SIZE_MBYTES_MAX
default 16
help
Defines the size (in MiB) of the default memory area for Contiguous
- Memory Allocator.
+ Memory Allocator. This value must be larger than zero.
config CMA_SIZE_PERCENTAGE
int "Percentage of total memory"
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/