Re: [PATCHv5 1/3] dts: socfpga: Add bindings for Altera SoC SDRAM controller

[Steffen Trumtrar]

Hi!

On Thu, May 15, 2014 at 11:04:49AM -0500, tthayer@xxxxxxxxxx wrote:
> From: Thor Thayer <tthayer@xxxxxxxxxx>
> 
> Addition of the Altera SDRAM controller bindings and device
> tree changes to the Altera SoC project.
> 
> v2: Changes to SoC SDRAM EDAC code.
> 
> v3: Implement code suggestions for SDRAM EDAC code.
> 
> v4: Remove syscon from SDRAM controller bindings.
> 
> v5: No Change, bump version for consistency.
> 
> Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxx>
> ---
>  .../bindings/arm/altera/socfpga-sdram.txt          |   11 +++++++++++
>  arch/arm/boot/dts/socfpga.dtsi                     |    5 +++++
>  2 files changed, 16 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
> new file mode 100644
> index 0000000..8f8746b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
> @@ -0,0 +1,11 @@
> +Altera SOCFPGA SDRAM Controller
> +
> +Required properties:
> +- compatible : "altr,sdr-ctl";
> +- reg : Should contain 1 register ranges(address and length)
> +
> +Example:
> +	sdrctl@ffc25000 {
> +		compatible = "altr,sdr-ctl";
> +		reg = <0xffc25000 0x1000>;
> +	};
> diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
> index df43702..6ce912e 100644
> --- a/arch/arm/boot/dts/socfpga.dtsi
> +++ b/arch/arm/boot/dts/socfpga.dtsi
> @@ -676,6 +676,11 @@
>  			clocks = <&l4_sp_clk>;
>  		};
>  
> +		sdrctl@ffc25000 {
> +			compatible = "altr,sdr-ctl", "syscon";
                                                   ^^^^^^^^^^

Get rid of that, too, please.
> +			reg = <0xffc25000 0x1000>;
> +		};
> +

How about

		sdrctl@ffc25000 {
			compatible = "altr,sdr-ctl";
			reg = <0xffc25000 0x1000>;
			ranges;

			edac@ffc2502c {
				compatible = "altr,sdram-edac";
				reg = <0xffc2502c 0x50>;
				interrupts = <0 39 4>;
			};
		};

Then we can later add:

			sdr-ports: ports@ffc2507c {
				#reset-cells = <1>;
				compatible = "altr,sdr-ports";
				reg = <0xffc2507c 0x10>;
				clocks = <&ddr_dqs_clk>;
				...
			};

to use the reset-controller framework for the port resets.

>  		rstmgr@ffd05000 {
>  			compatible = "altr,rst-mgr";
>  			reg = <0xffd05000 0x1000>;
> -- 

Regards,
Steffen

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/