[PATCH v2 07/14] mmc: mmci: add ddrmode mask to variant data

From: srinivas . kandagatla
Date: Thu May 15 2014 - 05:37:29 EST


From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>

This patch adds ddrmode mask to variant structure giving more flexibility
to the driver to support more SOCs which have different datactrl register
layout.

Without this patch datactrl register is updated with wrong ddrmode mask on non
ST SOCs, resulting in card detection failures.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
drivers/mmc/host/mmci.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 1385554..dec70d2 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -59,6 +59,7 @@ static unsigned int fmax = 515633;
* is asserted (likewise for RX)
* @sdio: variant supports SDIO
* @st_clkdiv: true if using a ST-specific clock divider algorithm
+ * @datactrl_mask_ddrmode: ddr mode mask in datactrl register.
* @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register
* @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl
* register
@@ -76,6 +77,7 @@ struct variant_data {
unsigned int datalength_bits;
unsigned int fifosize;
unsigned int fifohalfsize;
+ unsigned int datactrl_mask_ddrmode;
bool sdio;
bool st_clkdiv;
bool blksz_datactrl16;
@@ -114,6 +116,7 @@ static struct variant_data variant_u300 = {
.fifosize = 16 * 4,
.fifohalfsize = 8 * 4,
.clkreg_enable = MCI_ST_U300_HWFCEN,
+ .datactrl_mask_ddrmode = MCI_ST_DPSM_DDRMODE,
.datalength_bits = 16,
.sdio = true,
.pwrreg_powerup = MCI_PWR_ON,
@@ -126,6 +129,7 @@ static struct variant_data variant_nomadik = {
.fifosize = 16 * 4,
.fifohalfsize = 8 * 4,
.clkreg = MCI_CLK_ENABLE,
+ .datactrl_mask_ddrmode = MCI_ST_DPSM_DDRMODE,
.datalength_bits = 24,
.sdio = true,
.st_clkdiv = true,
@@ -140,6 +144,7 @@ static struct variant_data variant_ux500 = {
.fifohalfsize = 8 * 4,
.clkreg = MCI_CLK_ENABLE,
.clkreg_enable = MCI_ST_UX500_HWFCEN,
+ .datactrl_mask_ddrmode = MCI_ST_DPSM_DDRMODE,
.datalength_bits = 24,
.sdio = true,
.st_clkdiv = true,
@@ -155,6 +160,7 @@ static struct variant_data variant_ux500v2 = {
.fifohalfsize = 8 * 4,
.clkreg = MCI_CLK_ENABLE,
.clkreg_enable = MCI_ST_UX500_HWFCEN,
+ .datactrl_mask_ddrmode = MCI_ST_DPSM_DDRMODE,
.datalength_bits = 24,
.sdio = true,
.st_clkdiv = true,
@@ -800,7 +806,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
}

if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50)
- datactrl |= MCI_ST_DPSM_DDRMODE;
+ datactrl |= variant->datactrl_mask_ddrmode;

/*
* Attempt to use DMA operation mode, if this
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/