[PATCH v1.2 4/16] arcmsr: limit max number of SCSI command request

From: ching
Date: Wed May 14 2014 - 07:13:31 EST


From: Ching<ching2048@xxxxxxxxxxxx>

Have a limitation of max number of SCSI command request to prevent command overflow.

Signed-off-by: Ching<ching2048@xxxxxxxxxxxx>
---

diff -uprN a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
--- a/drivers/scsi/arcmsr/arcmsr.h 2014-05-06 15:24:06.000000000 +0800
+++ b/drivers/scsi/arcmsr/arcmsr.h 2014-05-06 15:22:36.000000000 +0800
@@ -45,11 +45,12 @@
#include <linux/interrupt.h>
struct device_attribute;
/*The limit of outstanding scsi command that firmware can handle*/
-#define ARCMSR_MAX_OUTSTANDING_CMD 256
#ifdef CONFIG_XEN
#define ARCMSR_MAX_FREECCB_NUM 160
+#define ARCMSR_MAX_OUTSTANDING_CMD 155
#else
#define ARCMSR_MAX_FREECCB_NUM 320
+#define ARCMSR_MAX_OUTSTANDING_CMD 255
#endif
#define ARCMSR_DRIVER_VERSION "v1.30.00.04-20140428"
#define ARCMSR_SCSI_INITIATOR_ID 255
@@ -598,6 +599,7 @@ struct AdapterControlBlock
#define FW_DEADLOCK 0x0010
atomic_t rq_map_token;
atomic_t ante_token_value;
+ uint32_t maxOutstanding;
int msix_vector_count;
};/* HW_DEVICE_EXTENSION */
/*
diff -uprN a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
--- a/drivers/scsi/arcmsr/arcmsr_hba.c 2014-05-07 18:26:42.000000000 +0800
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c 2014-05-07 18:43:40.000000000 +0800
@@ -134,7 +134,7 @@ static struct scsi_host_template arcmsr_
.eh_bus_reset_handler = arcmsr_bus_reset,
.bios_param = arcmsr_bios_param,
.change_queue_depth = arcmsr_adjust_disk_queue_depth,
- .can_queue = ARCMSR_MAX_FREECCB_NUM,
+ .can_queue = ARCMSR_MAX_OUTSTANDING_CMD,
.this_id = ARCMSR_SCSI_INITIATOR_ID,
.sg_tablesize = ARCMSR_DEFAULT_SG_ENTRIES,
.max_sectors = ARCMSR_MAX_XFER_SECTORS_C,
@@ -697,7 +697,7 @@ static int arcmsr_probe(struct pci_dev *
host->max_lun = ARCMSR_MAX_TARGETLUN;
host->max_id = ARCMSR_MAX_TARGETID; /*16:8*/
host->max_cmd_len = 16; /*this is issue of 64bit LBA ,over 2T byte*/
- host->can_queue = ARCMSR_MAX_FREECCB_NUM; /* max simultaneous cmds */
+ host->can_queue = ARCMSR_MAX_OUTSTANDING_CMD; /* max simultaneous cmds */
host->cmd_per_lun = ARCMSR_MAX_CMD_PERLUN;
host->this_id = ARCMSR_SCSI_INITIATOR_ID;
host->unique_id = (bus << 8) | dev_fun;
@@ -2220,8 +2220,7 @@ static int arcmsr_queue_command_lck(stru
arcmsr_handle_virtual_command(acb, cmd);
return 0;
}
- if (atomic_read(&acb->ccboutstandingcount) >=
- ARCMSR_MAX_OUTSTANDING_CMD)
+ if (atomic_read(&acb->ccboutstandingcount) >= acb->maxOutstanding)
return SCSI_MLQUEUE_HOST_BUSY;
ccb = arcmsr_get_freeccb(acb);
if (!ccb)
@@ -2432,12 +2431,26 @@ static bool arcmsr_get_hbc_config(struct
}
static bool arcmsr_get_firmware_spec(struct AdapterControlBlock *acb)
{
- if (acb->adapter_type == ACB_ADAPTER_TYPE_A)
- return arcmsr_get_hba_config(acb);
- else if (acb->adapter_type == ACB_ADAPTER_TYPE_B)
- return arcmsr_get_hbb_config(acb);
+ bool rtn = false;
+
+ switch (acb->adapter_type) {
+ case ACB_ADAPTER_TYPE_A:
+ rtn = arcmsr_get_hba_config(acb);
+ break;
+ case ACB_ADAPTER_TYPE_B:
+ rtn = arcmsr_get_hbb_config(acb);
+ break;
+ case ACB_ADAPTER_TYPE_C:
+ rtn = arcmsr_get_hbc_config(acb);
+ break;
+ default:
+ break;
+ }
+ if(acb->firm_numbers_queue > ARCMSR_MAX_OUTSTANDING_CMD)
+ acb->maxOutstanding = ARCMSR_MAX_OUTSTANDING_CMD;
else
- return arcmsr_get_hbc_config(acb);
+ acb->maxOutstanding = acb->firm_numbers_queue - 1;
+ return rtn;
}

static int arcmsr_polling_hba_ccbdone(struct AdapterControlBlock *acb,



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/